Tools that can be plugged in to run, AND charge up the battery that's in the tool at the same time. I'll take my patent commission at any time, tool companies.
@@shanesmith4639you would think it's not too much of a problem for tool companies to cater for that....after all we've had that feature in the form of laptops, mobile phones etc.....but I guess thier solution to that requirement is a second battery to use when tother is charging 😉
3 pin XLR for power is not unprecedented. I have worked on power wheelchairs (which usually have two 12 volt batteries in series for 24V), and they use it to output power to accessories. Makes it real easy to plug things in wrong, but I guess it was cheaper than coming up with something new.
I've been subscribed for years now. Haven't been watching as much since the cnc came into play. Stick around for the boltr videos and general engineering/ teardown subject matter. I don't dare unsubscribe since you have taught me so much regarding electronicals/industrial systems that has literally changed my path in life.
i dont know the why, but after being subbed to you for many many years now, and you have come to gain my trust with your morals and ethics, i trust you on this one.
Insider information: I highly doubt that part is sand cast. It looks to me like a shot blasted/shot peened aluminum die-casting. Shot peening is common to achieve desirable mechanical properties of the base metal. It is also an effective clean-up operation for removing flash, produces a better appearance, masks defects, etc... Tho I would have to inspect the part to tell you for sure. Once you understand there is a difference; you can likely notice a texture difference visually, especially with magnification. FWIW in my experience, blasted aluminum darkens to a smoky grey where sand cast aluminum is still silvery white-grey. All dependent on post-processing of course... Oh ya, btw - I'm unsubbing Edit: not to mention the geometry (thin cross-sections, right angles) of that casting is Absolutely better suited to be die-cast. I hope someone out there finds this helpful or interesting.
We use those extensively in the film / entertainment industry for 24-volt power. 12-volt is usually using 4-pin connectors. They’re very robust for that use!
Ahh. The ubiquitous E-bike connector... I have no idea who thought about using audio connectors for high voltage and high amperage applications, but they deserve a metal. Preferably cheap, like lead, and pinned at a very high velocity...
You should do BOLTR videos on Mellif tools. They make tools for Dewalts battery platform that Dewalt doesn’t make, such as a soldering iron, rivet gun, transfer pump. I bought they’re soldering iron and it’s surprisingly good. Heat regulation and amount is better than expected, cord is well made, has a low voltage alarm and shut off, and has the ability to plug in an external power source. Edit: THEY HAVE A BUG ZAPPER! A BUG ZAPPER THAT RUNS ON DEWALT BATTERIES! They even have a nibbler, a variety of sanders, vacuum, coffee maker, and a cordless pressure washer. The pressure washer actually looks pretty bad ass, the pump on it actually looks Skookum, it’s not one of those hand held units, you connect your pressure hose and gun to it.
The issue is... You've given us enough knowledge, that as you do teardowns we can identify trash after you've cracked the shell. Long time subscribers are looking for you, Dewclaw, and cowboy engineering getting things done.
We don't want you getting hurt Uncle B. But scratching moldings with a razor and poking bindings with a volt meter aren't as educational as busting out the burke bar these days
I like the way your brain works, I have "what happens if"-tified myself into some interesting situations before so glad to see curiostipidity still exists.
Uh oh is this the trial round to see if we will accept AI Ave? -Clean bench -Flat out admitting he made a mistake with his wire routing -Not recognizing a simple XLR connector -The fade to black on his once prominent catch phrase before it got to the demonitizing part "Focus you...." even though it clearly (pun intended) had not yet focused. -Please uncheck that notification bell and make sure you unsubscribe! I don't like it one bit. However it looks like Ave is resistant to their attempted assimilation. There was mention made of the ladies auxiliary and only he would do so. Keep fighting the good fight my man.
Surprised the board isn't covered in epoxy, being that it is expected to be used around water. What if you're pumping water up to your shins and you drop the jeezlus thing.
If you have that much water and only an 18v battery powered pump people are gon a be looking at you like you're mentally handicapped wondering if you've ever seen a submersible sump pump before
I have the ryobi version. I use it to empty out broken washing machines when they fail at rentals. Biggest job was emptying a decorative front yard pond.
Same, but I also want to know what happens, and to be a part of the greatest TH-cam experiment ever! Imagine what will happen when a channel gets 1Million + subscribers at the same time. I predict that TH-cam will glitch and shut down halfway through the resubscribe vidjeo. Haha!
It’s nice to see somone on the u tube who is not motivated by money. Arguably the knowledge gained from the comment section conversations on most of these videos is worth more than money but still here is a guy who is out here havin fun in the shop like many of us do on the weekends but instead of 3 or 4 peoples shorts of knowledge exchange there is people all over the world. For that I thank you guy who runs the channel for giving us all something more valuable than money for free.
Always as a child was I curious as to what laid within, and when I looked inside of my dads PC quite literally, guess who went without! Love you dude, for the breakdowns, for information, but heads above all, you. Fucking love you, who you are, why you are and what you are. Break laugh love
5:53 Doesn't look like a half bridge to me. The Drain & Source are tied together, so this is just to decrease the RdsOn resistance / increase current carrying capability. 7:18 Def looks like just a standard NTC thermistor to me. No diode or thermocouple involved, and also way cheaper and easier to implement. 16:58 Owners manual has a table indicating what the different LED states mean : ON = Ready to operate FLASHING = Voltage is low. Check all connections. OR pump has run dry. Turn pump off and relocate intake filter to deeper water. DIMLY LIT = Pump is overheating. Turn pump off and allow to cool. Inspect impeller for any possible obstructions. PULSING = Pump is overloading. Turn pump off. Inspect impeller for any possible obstructions.
Dude... love these videos! Your jokes, quips, parables, slang and sayings keep me engaged from beginning to end🤣😂🤣 I've looked through your store and I have a suggestion! You need a shirt with a line diagram of a cordles power tool with all the items labeled with your sayings...such as pixy container, pixy dancing path, choochem... and such! I'd buy one in a second! Hope to see one on there some day! Keep the videos coming man! 👍
Hey dude anytime I see a workbench that has been painted Somebody's got to be moving Remember the green acres song farm living is a life for me Go for it
I bought the smallest 4-stroke transfer pump that Honda makes for around the homestead. Without the need for batteries or a cord, it pumps water wherever I need quickly and efficiently. It costs about 2x the Milwaukee pump, but it's still working after 6 years.
I sell these things. I sincerely appreciate seeing you rip it apart and poke at it's innards - and then still give me solid numbers I can tell people. Can't wait to see more.
It's rated for more voltage than you think. Just weird seeing it used for something other than audio. It actually looks like a good solid connection though.
Plug your mic into that plug and run it off the sound of your voice. Nyuck, nyuck, nyuck. And a point to ponder, how come when 'cleaning up' you get so dirty?
Bud I've never been subscribed and your new videos have been on the top of my recommendations for, shucks must have been like 2017 or something at the least.
I’ve been using the Bauer Battery shop vacuum around my car lot. I got two of the 5 amp hour batteries which is a plus because I own just about every Bauer power tool you can get. Haven’t been let down yet. So far the vacuum is amazing. I got the 7 gallon, and pulls around with no cords. I hate cords.
Harbor freight used to be like 50% of the quality for 20% of the price. Was basically junk, but was also cheap enough to still be worth it for stuff you didn't need to be long lasting or really nice. Now, their like 90% of the quality for 90% of the price. Much nicer quality on some of the stuff to the point many things are very reasonable quality tools. But, now the price is also often pretty close to common home gamer name brand tools. Especially since so many things are bare tools without batteries.
I love your videos, watch them every day. If you don't mind me asking, what camera and microphone do you use? Everything looks so crisp and well lit! And the sound is great.
Unlisted? Watching this feels dirty. Im not unsubscribing, TH-cam will think I want to watch coffee shop ASMR videos or something instead. Can't have that, it's not worth the risk.
It's nice to see a switch labelled with "Awn" and "Orf." Some days I struggle to count to such grand numbers as 1, and it's nice that I can still get stuff done.
Damn, your confidence is glorious. I took a screenshot, hopefully it reminds me to check back in on the regular, and hopefully re-sub when the Uncle sees fit!
So 10k views on the "Part 1" in an hour, but only 168 on the full breakdown? I guess your "unsubscribe" experiment may be causing some algorithm issues😂
Take note, it's unlisted, therefore no notification, and only shows on Bumblefork's Home page, not his video page Suspect someone's testing to see how many twig to it.
He must have unlisted it an hour ago. I got the notification and obviously came quicker than a teenager getting his first trip into a woman's auxiliary port
And you fell for that one, and how many years have you been married? You need serious therapy, of what kind, I'm at a loss there, but it's quite obvious that it take years to deprogram you. Hopefully you're not from California, because if that's the case. There's probably no hope of a slight recovery, I'm sorry to hear that you maybe beyond help. And you thought a clean work bench is a cause for concern. Poor fellow, let himself be led astray without his knowledge. What a sad way to go, and never knew the end was near. Poor AVe, must have ventured too close to Mt Shasta, and was abducted by aliens.
It'd be real nice to have more battery-operated tools that can easily be adapted to AC.
↑ This ↑ "But we'll cut into our high margin battery sales... "
To be fair this is 100% the old Ryobi pump, HF just kept the hybrid function. Ryobi dropped the hybrid on the new version.
Imagine that on the old hammer drill
Tools that can be plugged in to run, AND charge up the battery that's in the tool at the same time.
I'll take my patent commission at any time, tool companies.
@@shanesmith4639you would think it's not too much of a problem for tool companies to cater for that....after all we've had that feature in the form of laptops, mobile phones etc.....but I guess thier solution to that requirement is a second battery to use when tother is charging 😉
"A lot quieter when she's pumping something" - words of wisdom for a happy marriage by - AvE
Louder than ladies on chardonnay night
Please unsubscibe
'Giggety giggety'
I'm doing it not because I want to, but because I love experiments.
same...
really hope the re-subscribe doesn't pass me by...
bookmark somewhere in case the algorithm forgets...
I unsubscribed a few years ago. Oops.
Just use the RSS feed in the mean time. I don't actually use the youtube website almost ever. I just came here to unsubscribe.
For science.
Also I like that its a 3 pin xlr as a mains connector. It means that when on battery you can plug a microphone into the pump and sing to it.
Came here to say this exactly :)
Maybe it can be used after hours as a karaoke machine.
I hate it when they repurpose standard connectors. I bet they are cheap though.
connect an amp to it and use the thing as a VFD
3 pin XLR for power is not unprecedented. I have worked on power wheelchairs (which usually have two 12 volt batteries in series for 24V), and they use it to output power to accessories. Makes it real easy to plug things in wrong, but I guess it was cheaper than coming up with something new.
I've been subscribed for years now. Haven't been watching as much since the cnc came into play. Stick around for the boltr videos and general engineering/ teardown subject matter.
I don't dare unsubscribe since you have taught me so much regarding electronicals/industrial systems that has literally changed my path in life.
It pained me to do so , but unsubbed. Looking forward to seeing how this experiment plays out!
Ditto. I’m not crying, I’ve got something in my eye.
my eyes are sweating...@@grntitan1
I am not crying, you're crying.
My concern is how many who remembers to keep an eye out for next vi-deo:-)
Me too 😢
@friedmule5403 I know I'm not bright enough to remember. I've asked the wife to reminde me as she has a head on her shoulders.
i dont know the why, but after being subbed to you for many many years now, and you have come to gain my trust with your morals and ethics, i trust you on this one.
Insider information: I highly doubt that part is sand cast. It looks to me like a shot blasted/shot peened aluminum die-casting. Shot peening is common to achieve desirable mechanical properties of the base metal. It is also an effective clean-up operation for removing flash, produces a better appearance, masks defects, etc... Tho I would have to inspect the part to tell you for sure.
Once you understand there is a difference; you can likely notice a texture difference visually, especially with magnification. FWIW in my experience, blasted aluminum darkens to a smoky grey where sand cast aluminum is still silvery white-grey. All dependent on post-processing of course...
Oh ya, btw - I'm unsubbing
Edit: not to mention the geometry (thin cross-sections, right angles) of that casting is Absolutely better suited to be die-cast. I hope someone out there finds this helpful or interesting.
Unsubscibed as requested. Best channel on TH-cam.
Yep me 2....
Unsubscribed
Nope u subscribe I will not
“Non-native English speaker?” So, FRENCH Canadian?! UNSUBSCRIBED!
Done deal back now lol
Seeing the vast grey of that clean workspace was like staring into the void - quite unsettling!
About time this channel did a diverse and tolerant video.
Combination of a pump and an air raid warning siren. That'll come in handy sometime.
That's an XLR balanced audio connector. Bet you could fry an audio mixer or two with that power supply.
The Pins seem a little thick for XLR?
Right down to the registering notch. Even has that horrid satin finish and mounting holes. WTF!
We use those extensively in the film / entertainment industry for 24-volt power. 12-volt is usually using 4-pin connectors. They’re very robust for that use!
@@srpacificyep, my wife's 24v electric scooter charger uses the same connector. I did wonder!
Ahh. The ubiquitous E-bike connector...
I have no idea who thought about using audio connectors for high voltage and high amperage applications, but they deserve a metal. Preferably cheap, like lead, and pinned at a very high velocity...
Man an unlisted AvE video always an adventure. 😂
Please unsubscibe
You should do BOLTR videos on Mellif tools. They make tools for Dewalts battery platform that Dewalt doesn’t make, such as a soldering iron, rivet gun, transfer pump. I bought they’re soldering iron and it’s surprisingly good. Heat regulation and amount is better than expected, cord is well made, has a low voltage alarm and shut off, and has the ability to plug in an external power source.
Edit: THEY HAVE A BUG ZAPPER! A BUG ZAPPER THAT RUNS ON DEWALT BATTERIES! They even have a nibbler, a variety of sanders, vacuum, coffee maker, and a cordless pressure washer. The pressure washer actually looks pretty bad ass, the pump on it actually looks Skookum, it’s not one of those hand held units, you connect your pressure hose and gun to it.
The issue is... You've given us enough knowledge, that as you do teardowns we can identify trash after you've cracked the shell. Long time subscribers are looking for you, Dewclaw, and cowboy engineering getting things done.
We don't want you getting hurt Uncle B. But scratching moldings with a razor and poking bindings with a volt meter aren't as educational as busting out the burke bar these days
In a world where some tools get smarter, every day, thanks for maintaining your standards!
Must've gotten the female model; doesn't say what's wrong just blinks passive aggressively.
Not your fault. The beauty of Harbor Freight stuff is sometimes it works most of the time it doesn't.
I like the way your brain works, I have "what happens if"-tified myself into some interesting situations before so glad to see curiostipidity still exists.
Am I the only one who can't wait to see the outcome of the experiment?
Now I have something to look forward, thank you kind sir.
honestly i was really hoping after that cliffhanger part 1 we would come back to a completely filled bench “ah yes this feels so much more at home”
I was expecting that too haha
Please unsubscibe
@@kirkchapman80 i did as he ordered me to 🫡
So long and thanks for all the fish!
Always love hearing your Canuck English.
Nothing like a good ole Boltr. I love these!
This clean healing bench AvE is kind of suspicious 😂
Needs fire embellishments.😮
Uh oh is this the trial round to see if we will accept AI Ave?
-Clean bench
-Flat out admitting he made a mistake with his wire routing
-Not recognizing a simple XLR connector
-The fade to black on his once prominent catch phrase before it got to the demonitizing part "Focus you...." even though it clearly (pun intended) had not yet focused.
-Please uncheck that notification bell and make sure you unsubscribe!
I don't like it one bit. However it looks like Ave is resistant to their attempted assimilation. There was mention made of the ladies auxiliary and only he would do so.
Keep fighting the good fight my man.
Right what did they do with the real AvE.
@@cfreezy45 this is some government thing. I'm sure.
Maybe he's trying to send us a message, that he's being held against his will or something
Best "Real"Tool review channel left,Truthful knowledge!!!¡
I can't unsubscribe your the only Canadian I watch
I have the same pump. Took that circuit board out and wired it direct.
Trimmed a little plastic and now I'm running it on my dewalt batteries.
It made me sad, but I have to add to the chaos 🤣
Surprised the board isn't covered in epoxy, being that it is expected to be used around water. What if you're pumping water up to your shins and you drop the jeezlus thing.
Then you'll be less stupid with the next one
conformal coating cuts into both their manufacturing costs and replacement profits...
If the water is that deep, you'd better have a real pump lol
If you have that much water and only an 18v battery powered pump people are gon a be looking at you like you're mentally handicapped wondering if you've ever seen a submersible sump pump before
If the water is up to your shins, get the fuck out the tub and don't drop your pump 😂😂😂
Suction. Pipes...and positive pressures.
Beautiful.
Are you feeling ok? You got me worried about you with the healing bench so clean.
I don't know why you're asking me to do this, but history has shown, I'll learn something proud and amusing
Looks just like the green version I've had for 6 years. Works great still too.
I have the ryobi version. I use it to empty out broken washing machines when they fail at rentals. Biggest job was emptying a decorative front yard pond.
Please unsubscibe
@@kirkchapman80 what is your problem? 😂
I use my m18 transfer pump a couple times a week, it's super nice for draining water heaters!
Very very colourful vocabulary. Odd fellow. Defo the leader of the alumin,nutty. Something in the Canadian. Pure unadulterated entertainment. Love it
So uh, not a part 2 in title? OCD engaged!
So hard to do that! You're one of the first guys I started following!
Same, but I also want to know what happens, and to be a part of the greatest TH-cam experiment ever! Imagine what will happen when a channel gets 1Million + subscribers at the same time. I predict that TH-cam will glitch and shut down halfway through the resubscribe vidjeo. Haha!
Thank you thank you thank you thank you for another awesome BOLTR video! I absolutely love this series!
It’s nice to see somone on the u tube who is not motivated by money. Arguably the knowledge gained from the comment section conversations on most of these videos is worth more than money but still here is a guy who is out here havin fun in the shop like many of us do on the weekends but instead of 3 or 4 peoples shorts of knowledge exchange there is people all over the world. For that I thank you guy who runs the channel for giving us all something more valuable than money for free.
This is interesting. Really want to know the results of your experiment
How did my search history end up as the title?
3:12 Hell yeah, you can plug it into your stereo system! XD Love the 3-pin XLR for power... hahahaha
The amount you know about plastics amd molding blows me away.
Always as a child was I curious as to what laid within, and when I looked inside of my dads PC quite literally, guess who went without! Love you dude, for the breakdowns, for information, but heads above all, you. Fucking love you, who you are, why you are and what you are. Break laugh love
For clarity, I broke dads PC. I wanted to see what "that switch" on the back did.. Magic pixies!
Please unsubscibe
I did the same to my dad's stereo receiver and speakers.
Got a whooping from hell and was condemned tip my room for months.
5:53 Doesn't look like a half bridge to me. The Drain & Source are tied together, so this is just to decrease the RdsOn resistance / increase current carrying capability.
7:18 Def looks like just a standard NTC thermistor to me. No diode or thermocouple involved, and also way cheaper and easier to implement.
16:58 Owners manual has a table indicating what the different LED states mean :
ON = Ready to operate
FLASHING = Voltage is low. Check all connections. OR pump has run dry. Turn pump off and relocate intake filter to deeper water.
DIMLY LIT = Pump is overheating. Turn pump off and allow to cool. Inspect impeller for any possible obstructions.
PULSING = Pump is overloading. Turn pump off. Inspect impeller for any possible obstructions.
Yeah it was par for the course that he said it should flash a code, while also not checking the manual for a list of codes
@@rollastudent Nobody reads the manual until they have problems with it!
Please unsubscibe
@@rollastudent Please unsubscibe
@@kirkchapman80 Spam is spam.
Dude... love these videos! Your jokes, quips, parables, slang and sayings keep me engaged from beginning to end🤣😂🤣
I've looked through your store and I have a suggestion! You need a shirt with a line diagram of a cordles power tool with all the items labeled with your sayings...such as pixy container, pixy dancing path, choochem... and such! I'd buy one in a second! Hope to see one on there some day! Keep the videos coming man! 👍
Hey dude anytime I see a workbench that has been painted Somebody's got to be moving Remember the green acres song farm living is a life for me Go for it
I bought the smallest 4-stroke transfer pump that Honda makes for around the homestead. Without the need for batteries or a cord, it pumps water wherever I need quickly and efficiently. It costs about 2x the Milwaukee pump, but it's still working after 6 years.
Please unsubscibe
We've had one for 4 years now and it still starts and runs great!
@@kirkchapman80 I did. Lol! When I first subbed, bumblefork had like 35k, kind of hurt dropping him at 1.44M.
Does it sound like the Jetson's car when you shut it off? That is my favorite part of the little EU2000i genny we have kicking around the shop.
@@jay90374 It's a good little pump. Though, I might have fibbed a little. I now think I have the 15 instead of the 10. It fills IBC totes in no time!
It's much easier (read: cheaper) to interface a thermistor than a thermocouple or a thermal diode.
Please unsubscibe
I sell these things. I sincerely appreciate seeing you rip it apart and poke at it's innards - and then still give me solid numbers I can tell people. Can't wait to see more.
ave spiffing britt crossover was not expected, but appreciated
I'm curious about our little experiment now too.
It should yield interesting results, knot like we be going anywhere
The A/C power is an XLR connector used for microphones. I'm sure nothing could go wrong using that for power.
It's rated for more voltage than you think. Just weird seeing it used for something other than audio. It actually looks like a good solid connection though.
Many things use em. My wife power chair, scooter and hoyer lift use it. Not anything unusual, maybe not common, but definately not unknown or wrong.
Phantom microphones are 48 volt ac.
Plug your mic into that plug and run it off the sound of your voice. Nyuck, nyuck, nyuck. And a point to ponder, how come when 'cleaning up' you get so dirty?
Love these teardowns.
“Have another chard and a dart marge!!” 😂😂😂😂😂😂
You sir are one of if not the most genuine person on TH-cam.
Please unsubscibe
Richard Gene the Fishing Machine is a great watch too! If youre in to that!
About time that i can get a transfer pump with a balanced audio XLR output
Plug up your +48v Phantom Mic. 😂
Bud I've never been subscribed and your new videos have been on the top of my recommendations for, shucks must have been like 2017 or something at the least.
Looks identical to the ryobi pump I got, their hybrid flood lights work great too
When I saw the title name, I didn’t know what to expect.
is it faster to pump 20 liters out of a 5 gallon bucket, or 5 gallons out of a 20 liter bucket?
The brain box prevents ruining the battery when your run it down.
LiPo don't come back if you discharge them all the way down.
I did as you asked, Commander Bumble. I await further instruction...
Not a fan of the XLR mains plug but it's nice to see the AC availability
Also I've done as requested 👍🏻
TH-cam showed me the asmr cleaning video, it was actually tricky finding this one! I'm out for now to play along!
I ain't unsubscribing... You got me for life..
I too love a good experiment, done
I just wanna mention the first time it stopped running after pumping the bucket it was goin on das blinken light.
I’ve been using the Bauer Battery shop vacuum around my car lot. I got two of the 5 amp hour batteries which is a plus because I own just about every Bauer power tool you can get. Haven’t been let down yet. So far the vacuum is amazing. I got the 7 gallon, and pulls around with no cords. I hate cords.
I have the smaller Hercules one and love it, can be both battery or AC perfect for quick messes in the car and in my shop
Happy to do my part, "liked" and dropped you like dirty rubber, east van style. See you in a couple days!
I unsubscribed and immediately got a small panic attack over loosing something that helps keep me sane and subscribed again within seconds ❤
Is it a microphone? The connector looks like the other end belongs in a mixing board. Is it actually an XLR, or does it just identify as one?
Harbor freight used to be like 50% of the quality for 20% of the price. Was basically junk, but was also cheap enough to still be worth it for stuff you didn't need to be long lasting or really nice.
Now, their like 90% of the quality for 90% of the price. Much nicer quality on some of the stuff to the point many things are very reasonable quality tools. But, now the price is also often pretty close to common home gamer name brand tools. Especially since so many things are bare tools without batteries.
Half the time I have no fucking idea what his talking about but I love this channel
I can not unsubscribe, you are one of the last voices of sanity out there.
Interested in the social experiment Uncle Bumblefork is working on.
"We're gonna zoom in on the N words" WHOA!!!! Oh, wait, innards... never mind...
I love your videos, watch them every day. If you don't mind me asking, what camera and microphone do you use? Everything looks so crisp and well lit! And the sound is great.
I always love a good experiment. Maybe he’s onto something with the algorithm.
Unlisted? Watching this feels dirty. Im not unsubscribing, TH-cam will think I want to watch coffee shop ASMR videos or something instead. Can't have that, it's not worth the risk.
Agreed, it's not worth the risk it poses. I'm stickin it to the man
AvE doing viewer compliance testing. Next he'll tell us it's just a few days to slow the spread.
i would drink his coolaid. no homo.
ok some homo.
Skukum chooching best show on here
Looking forward to catching up
on the latest gadgetry
cheers to you and the dew claw ☕
It's nice to see a switch labelled with "Awn" and "Orf." Some days I struggle to count to such grand numbers as 1, and it's nice that I can still get stuff done.
The healing mat looks like it could use some healing. Pretty rough lifestyle it lives
I'll do it. I don't like it... but I'll do it. This is gunna hurt worse than my second marriage.
Uncle Bumblefuk always, immediately, knows when it's been "Hand polished"
This is essentially identical to a Ryobi unit I have (other than the color). Same brass ended HD hose too. Bought it for the AC adapter...
WTF??? It’s like…. Clean!
thisman is sick the healing bench is clean some cal the quacks
Hope you and family are safe amongst all the fires.
I've been watching since you turned threads into a potato, I'm not unsubscribing now. 😆
yea! im still waiting on that bartending cnc thingamagic
Looks just like the ryobi one I got for a pretty hefty price, way back
Damn, your confidence is glorious. I took a screenshot, hopefully it reminds me to check back in on the regular, and hopefully re-sub when the Uncle sees fit!
Taking phantom power to a whole other level
So 10k views on the "Part 1" in an hour, but only 168 on the full breakdown? I guess your "unsubscribe" experiment may be causing some algorithm issues😂
Take note, it's unlisted, therefore no notification, and only shows on Bumblefork's Home page, not his video page
Suspect someone's testing to see how many twig to it.
He must have unlisted it an hour ago. I got the notification and obviously came quicker than a teenager getting his first trip into a woman's auxiliary port
@@Joe_Bidens_hair_fetishsame, was notified.
also, came in half a pump.
@@azza-in_this_day_and_age - no need to brag 😂
@@PapaWheelie1 🤗
sweet experiment! why not?
Let the experiment begin!
Well...I held out for 7 days, then I caved and subscribed again.
Got tired of having to come back and check for videos every day...
Unsubscribed but I'll probably forget to resubscribe for 6 months so like my wife says it's all my fault.
Ill remind ya
And you fell for that one, and how many years have you been married?
You need serious therapy, of what kind, I'm at a loss there, but it's quite obvious that it take years to deprogram you.
Hopefully you're not from California, because if that's the case.
There's probably no hope of a slight recovery, I'm sorry to hear that you maybe beyond help.
And you thought a clean work bench is a cause for concern.
Poor fellow, let himself be led astray without his knowledge.
What a sad way to go, and never knew the end was near.
Poor AVe, must have ventured too close to Mt Shasta, and was abducted by aliens.