Thank you so much for watching. Your the man. All my trucks have holmes hobbies motors. Unfortunately I can't afford brushless yet. I can't wait to try something else like your Revolver motors. Sorry I'm just rambling because I'm star struck. Lol I'm a big fan thanks again.
And also I wanna say the trailmaster is not only probably the best $20 motor on the market it's one of the best motors I've used. I could only imagine how good your high end models are. Thanks for what you do.
I also love my k10. I have the same color and it is so sharp looking. Just got done putting all my black w/ gold trim treal brass on it! ( bout $500 worth 😮). Did the reefs raw 500 operation Charlie edition (black and gold to match the brass) and mamba x w/ slate. Full light kit including rock lights, I think I might of went a little over board…..😂😂😂. But she pretty now😊. Keep up the good vids and be safe with all the rain and flooding coming ur way! God bless man.
@@jessewiesner1636 surprisingly it was only about 12 pieces total and it only added a little over a pound. Still need a bit more brass and weight lower👍. I kinda go all out if I’m going to do it ya know. Hahaha.
That K10 looks sexy with them white lettering and with that light kit too... (Biting my knuckle) Because of you, I think I'm going to bite the bullet and get that truck.
My trx4 has good torque on low gear but once I put it in high it has less torque then low gear.if I get stuck on mud or something the high gear does not even move the wheels but low gear does move the wheels. I just changed the spur gear to a steel one so I’m not sure if that is the reason. Do you know why it’s doing that?
@@NerdHobbiesDiecast Try the dual stage foams there are pain to install but they are great for pulling trailer only use them in the back keep a little softer ones in the front.
@@tonylilly8028 I think you'll be OK it's not that much difference. They come with different Springs for different setups. I would run the softest Spring for full droop. You might belly drag on obstacles but it will perform and be a lot better on side hills.
@@tonylilly8028 Red cat calls for 97 mm anyway so you'll be fine. Even though when you set them beside the stock shocks the desert lizard 90mm were longer for some reason. Lol
@@ezboyrc553 Good deal thanks for answering my question most people don't even reply and by the way I have the Redcat Everest gen 7 Pro I subscribe to your Channel I will let you know how the shock situation turns out and I also ordered the portal axles and they just came in.I figured that would also be a good upgrade. your backyard course is awesome I'm looking to build one myself.
I love the white lettering on the tires, gives it that good old school look
Nice truck n parts and awesome course!! That all took some time!!
nice garage and course, I see why you love this truck
Thank you so much for watching. Your the man. All my trucks have holmes hobbies motors. Unfortunately I can't afford brushless yet. I can't wait to try something else like your Revolver motors. Sorry I'm just rambling because I'm star struck. Lol
I'm a big fan thanks again.
And also I wanna say the trailmaster is not only probably the best $20 motor on the market it's one of the best motors I've used. I could only imagine how good your high end models are. Thanks for what you do.
That little Gen-8 walked that course like it was on flat ground 👍
Actually the wheels on the gen8 I just took off the high trail
I also love my k10. I have the same color and it is so sharp looking. Just got done putting all my black w/ gold trim treal brass on it! ( bout $500 worth 😮). Did the reefs raw 500 operation Charlie edition (black and gold to match the brass) and mamba x w/ slate. Full light kit including rock lights, I think I might of went a little over board…..😂😂😂. But she pretty now😊. Keep up the good vids and be safe with all the rain and flooding coming ur way! God bless man.
That sounds awesome. And thanks
dang $500 in brass is crazy! how much does she weight at this point?
@@jessewiesner1636 surprisingly it was only about 12 pieces total and it only added a little over a pound. Still need a bit more brass and weight lower👍. I kinda go all out if I’m going to do it ya know. Hahaha.
I love that they put super swampers on these, these are real tires made by TSL.
Pretty cool back yard buddy, the K10 looks sweet💯
Idky why but when the trailer rolled onto the screen i about died😂😂😂
You mean the Double stack trailer. Lol
beautiful course with nice trucks man,,
Check the servo horn the old plastic ones are known to strip teeth! The K10 comes with alloy servo horn. Thanks for making videos!
Unfortunately the servo is not even making noise. But I should have a warranty still I will try contacting taxxas support team
It looks good with that bumper from the bronco👍
That was great! I really like the TRX4.
Thank you. That is my favorite truck
Those high trail trail truck r nice looking rigs👍 they just need a good set of crawler wheels and tires
Thank you I did have other wheels on it I just put these back on good the other day
Can you post a link for that light kit please? I'm putting a hard body on my dsm chassis sporting ascent.
I don't have the link I just get them off amazon.
Awesome Course , The Gen 8 surprised me 👊
That truck actually surprises a few people. Lol thanks for watching buddy
@@ezboyrc553 You must be near the coast of NC?
Yes about an hour away. We're not close enough for the main hurricane but we get the flooding after effects usually we were lucky this time not to.
great content glad i found you new sub for you have a great day
Thank you
That K10 looks sexy with them white lettering and with that light kit too... (Biting my knuckle) Because of you, I think I'm going to bite the bullet and get that truck.
What bumper do you have on the K10 looks great
I hope traxxas come out with a Ford dentside body for this chassis
So do I. They need a Ford pick up that looks like the Bronco front end.
Thanks for the content! You going to Beat The Creek this weekend???
I wish I could I'm pretty sure it's far away from me. Where is it anyway?
I can't remember.
Does that white lettering smear or does it stay as is permanent?
You have to touch them up quite often especially on these 2.2 tires that are so big they scrape off more than the smaller tires
My trx4 has good torque on low gear but once I put it in high it has less torque then low gear.if I get stuck on mud or something the high gear does not even move the wheels but low gear does move the wheels. I just changed the spur gear to a steel one so I’m not sure if that is the reason. Do you know why it’s doing that?
Switch to a trial master motor. Or go brushless.
Cool course ! What kind of tires and foams on the gen 8
Dull stage on the rear regular up front.
Nice truck maybe someone can help me on this page. Why do my slippery? Stripped or screwed it keeps getting loose. It's the second one I put on
I'm not sure what you mean.
Very nice crawl course.
Thank you
Where abouts in NC ? Would you let me and my son drive on your course ?
Dudley NC
Nice vehicles. Any tire foam you would recommend?
I mostly just run regular foam I do run dual stage in the back on one of my vehicles and that helps a lot
@@ezboyrc553 if you're towing or something? my 2021 bronco's tires look flat because of the type of foam thats in them.
@@NerdHobbiesDiecast Try the dual stage foams there are pain to install but they are great for pulling trailer only use them in the back keep a little softer ones in the front.
Dual stage will prevent that.
On the gen8 for the desert lizard shocks what length you get 100mm?
90mm
@@ezboyrc553 thank u
Where you get that hauling trailer
I made it.
Did you paint the letters on the tires ?
Yes. I use white paint markers
Cool, I just got the red high trail today ! Can’t wait to run it for first time 👍
Did you buy or make that trailer? I need me one
This one is homemade. I used a closet rack with a little piece of plywood and Tubing for axles.
@@ezboyrc553 well make another one for me lol
what length shocks are you running in the desert lizard ?
90mm
@@ezboyrc553 Do you think 100mm is to much i ordered a set a few weeks ago and didnt know what to get?
@@tonylilly8028 I think you'll be OK it's not that much difference. They come with different Springs for different setups. I would run the softest Spring for full droop. You might belly drag on obstacles but it will perform and be a lot better on side hills.
@@tonylilly8028 Red cat calls for 97 mm anyway so you'll be fine. Even though when you set them beside the stock shocks the desert lizard 90mm were longer for some reason. Lol
@@ezboyrc553 Good deal thanks for answering my question most people don't even reply and by the way I have the Redcat Everest gen 7 Pro I subscribe to your Channel I will let you know how the shock situation turns out and I also ordered the portal axles and they just came in.I figured that would also be a good upgrade. your backyard course is awesome I'm looking to build one myself.
You forgot the Bronco
I think you need a trx6 ultimate hauler
I agree. I really want one.
Those are cool
I like video RC
nice 👍
The GEN8 is clearly better on very steep inclines
It does pretty good if I had a little bit of weight up front would help some more.
Nice body❤
I can't think of anything less boring than a crawler.
Church is. Lol