Russian Nuclear Corporation molecular disruptor
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2021
- This thing actually does disrupt molecules. By applying a high voltage to needle tips in front of oppositely charged rings it generates small points of electrical plasma that split air molecules into separate atoms, allowing some to recombine into short lived, but very useful active molecules like ozone.
This project is designed to be used with the cheap ioniser style power supplies on eBay, and will convert them to a mini "ionic breeze" type unit that blows a gentle draught of air out the front with active components that have beneficial effects in some indoor environments.
I made a video about ozone that explains more:-
• The non-EPA guide to o...
Here are links to the PCB zipped gerber files. You'll probably have to copy and paste the links into your browser. TH-cam might block links to zip files for security reasons.
It's two separate designs because the corners are rounded and PCB makers may not like two different PCBs being submitted as a single panel.
The main needle holding panel:-
www.bigclive.com/ozone1.zip
The front plate with different text:-
www.bigclive.com/ozone3.zip
I've since tested this module with mains voltage ioniser modules, and the differing module sizes give different levels of ozone output. If using the mains voltage modules I recommend using two 1 Megohm resistors in series with each wire for safety. Preferably 1/2W or 1W resistors for their higher voltage rating. It works very well with the 12V module I showed, which is effectively an ozone generator already with its two opposite polarity carbon fibre emitters. When used with this panel much more ozone is generated.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:- www.bigclive.com/coffee.htm
This also keeps the channel independent of TH-cam's advertising algorithms allowing it to be a bit more dangerous and naughty.
#ElectronicsCreators - วิทยาศาสตร์และเทคโนโลยี
![500 บาท สุ่มกินสตรีทฟู้ดริมทะเล หาดจอมเทียนพัทยา 8K [HDR]](http://i.ytimg.com/vi/aZLagyZyQE4/mqdefault.jpg)
![[Full Episode] Hell's Kitchen Thailand EP.13 | 5 พ.ค. 67](http://i.ytimg.com/vi/Uhzt_Oprgc4/mqdefault.jpg)
"If the babies get a shock, it serves them right" I forgot how much I love watching this channel
You can't give 2 thumbs up for a comment, so let this be the second thumbs up. Big Clive's baby remark made me belly laugh and needed to then rewind.
I did learn by getting 220V shock, as I remember when I was 8 years old, playing with the socket.
Best line of the year I'm pretty sure.
Harsh lessons hopefully come from low currents.
If you never get shocked, you'll always be curious about getting shocked, so, let it happen in non-lethal ways.
Followed later by "spicy voltages." Love it.
"If the babies get a shock, it serves them right!" I can see that on the back of a t-shirt, with the Big Clive logo on the front where little t-shirt logos go.
My brother stuck his baby fingers in an Italian 2 pin socket in the 60's and he remembers it.
@@juncusbufonius As a toddler in the 60's I stuck my baby folk in a two prong socket, it didn't do the fork much good I seem to remember, but I have been interested in electronics ever since.
Just take my money! (And send the shirt plz)
Count me in for one
I got shocked when I was about 1.5 yo, that taught me to be careful with stuff
If baby gets a shock serves them right... My hero.
the only baby here is bigclive himself lol
Your comment did not do the statement justice. I read it before the video, then listened while driving home. Glad the Clive's statement came up at a stop-light, as there would've been trouble after I rolled out of the moving car laughing.
I didnt expect it and LOLed :)
Nobody zaps baby in a corner!
Yes they should know better and if they didn't they do now, it's called learning !
I wonder if your PCB supplier would blink at running a batch of "Clive's Patented Mk. 2 Type C Baby Zapper" boards.
Well, they in China don't hesitate making «baby heaters» which consist of effectively two electrodes to be put into water and connected to mains AC.
@@jkobain It's one thing to do it neglegently like that, but where's the charm? Making the gap betweek the two plates just the right size for baby fingers is the only thing I'd change.
@@jimsvideos7201 if Clive can get zapped, I'd say _any_ living child could get zapped as well.
best to put Ralfy's name on it instead, to avoid being put on a list somewhere.
Next time put "Eludeium Pew 36 Explosive Space Modulator". And see if it flies... :P
The actual Russian item might just go for brute force ionization: a square centimeter swath of very pure polonium-210.
In Russia, the ozone generates YOU :)
They carefully restrict such special materials to special government projects. Though they might be arrogant enough to use other radioactive substances in public use products similar to how some western countries used radium for self-illuminating watch dials. Similar arrogance made them ignore the specific technical dangers that led to the Nedelin and Chernobyl incidents.
@Alex Sickshow I was arguing how unlikely Russia / USSR would be to make that hypothetical polonium ionizer.
@Alex Sickshow The item in the video was titled by Big Clive and he admitted the typo. This thread is about a joke that a real Russian device would use radioactive polonium instead of electricity.
@@johndododoe1411 My guy you can order uranium online.
Fun fact: the URL code for this video starts with "ion". Well played Clive, well played indeed.
Had to double-check it's not a lower-case L. It's true!
Good catch!
Good to see you are a fan of Garage54 Clive!
That is the only place i'm familiar with bmi russian. although do they do anything else or just garage 54 translations?
Would anyone think it even possible that Clive would NOT be?
I died at that part 🤣 totally unexpected but epic nonetheless
Love their crazy ideas
As a child I used to "mess with electricity" and had quite a few shocks, now 76, have I learnt, well sort of but still get the odd one. Great listening to you Clive, you are my go to TH-cam relaxer, and information about electronics provider.
you not the only one. i experimented with the spark igniter from gas cookers. 2 inch long arcs. they pack a wallop.
"TH-cam relaxer" - I find that too. That is why I have him on now. Also "Nekkid Watchmaker", and others.
9:53 - "I'm gonna grab a high voltage supply. Probably a low voltage one."
I know what you meant, but this confused me for a split second.
High? Low?
Probably something in the middle then?
_The middlest of middles._
the most known russian nuclear "corporation" should be Rosatom. And I agree, the silk layer would be much more cold warish with cyrillic letters. Like this project very much
ЯUSSIAИ then. ;D
Rosatom's full name is State Nuclear Energy Corporation "Rosatom", so it's pretty close.
@@jkobain Or just roughly spell the english with cyrillic.
РУССИАН НЮКЛИР МОЛЕКЮЛАР ДИСРУПТОР
РосАтом
@@aigilea SNEC Rosatom... hmmmmmm... Snek Rosatom, the radioactive Russian danger noodle.
Sewing pins anneal/lose their hardness if you give them a couple of seconds in e.g. a cigarette lighter flame and let them cool. Makes them much easier to cut without wrecking sidecutters.
or just buy a pair of hard wire cutters like the excellent Knipex or cheap knockoffs from the other usual tool vendors
@@railgap Or use a pair of reputable pliers. The type that have the wire/pin/rod cutters on either side of the hinge.
Yep ! Cos they're made of iron, and not steel.
Otherwise you can use some pliers and just bend them to break at the marked point - you can actually do that pretty accurately. I've personally done that when repairing one of those little egg piercers with the bit of needle sticking out.
@@MeatLeBeef - that works to part it, but it can leave a little kink, or sometimes a split in the metal (so it's bifurcated), which wouldn't fit into the type of IC socket that Clive's using.
Just a comment to show appreciation for Clive always warning us before turning the lights back on, I'm light sensitive this allows me to actually close my eyes for a few seconds before, unless you have it you have no idea how bright lights effect migraines and nausea even when its just a quick flash.
YOU CAN TREAT WITH HIGH DOSE VITAMIN D WHICH YOU SEEM TO HAVE A DEFICIENCY OF...
@@esecallum its not a deficiency, its to do with my condition.
@@jamesl8053 your too ignorant. go suffer in silence
"Standard" sewing pins and needles are generally regular steel plated with chromium or nickel, in my experience. They're somewhat resistant to rusting unless the coating is broken. If there's, say, a scratch, and the item is in a damp environment, you get rapid corrosion at the scratch. The entire plated area acts as a cathode, and the exposed steel is an anode; there's an electrochemical effect. You can test this by nicking a pin or a needle with a file, and placing it on a bit of tissue that's been dampened with salty water.
If the pin or needle hasn't been plated at all, but is entirely non-stainless steel, doing that will tend to show corrosion preferentially where the metal has been most mechanically disturbed, i.e. the pin heads and points. The metal crystals there are most distorted from their lowest energy states, so it's energetically favourable for those atoms to escape in preference to atoms in other parts of the items.
Stainless pins and needles *are* findable, but I've found that many that are labelled/advertised as "stainless" are in fact just regular plated steel. The sellers are counting on people not bothering to check, or not finding it worth the trouble of complaining. The reason for using stainless, of course, is that one wouldn't get corrosion even if the surface *is* scratched.
WOWW !!! WHAT A WIKKID COMMENT/REPLY !!!
You're a true tovarisch !!!
@@alexmarshall4331 When I was in grad school at university, I taught first-year chemistry labs for a number of years. One of the last sets of experiments for the year was a module on corrosion, which was pretty cool if one paid attention. It involved bits of information from four or five labs the students had done previously, though that wasn't obvious. And unfortunately the lab manual didn't highlight that, and its explanations were pretty poor in general. (Sometimes, even some of my grad-student colleagues couldn't figure out what the manual was trying to explain, and I had to help *them* so they could teach *their* students.)
Once a chemistry teacher always a chemistry teacher... :-)
Needles and pins are made of iron, acid- dip profiled, then electroplated.
@@jpolowin0 A MASSIVE 👍's up...phewee kemystory !!! Keep it up geezah !!!
there is also "standard" titanium oxide(?) plated needles what's your take on those?
As a child I loved touching our ioniser, watching the arc jumping to my finger was fascinating. My lesson came later in life, accidentally touching the ac socket of an unplugged audio amplifier. It's not the kind of thing you want to feel twice.
Kind of like french kissing a lamp socket.
Nice to see the ozone generator proving its working. The PM2.5 drops as the O3 goes up.
Good demo
That's probably electrostatic precipitation.
Oh, a jail-see-pee-see-bee factory picture as a jigsaw puzzle? How nice!
The perfect little gift to give your nephew and niece when you go visiting family. I'm sure it'll drag them away from their mobiles.
I got one myself the other week. I actually liked their keychain toys better 😶
Thanks for the ozone test, much appreciated. After looking at more of these in the future it will really help give a visual just how much some of these pump out.
Worth adding solder to create a smooth ball or a dome over where you cropped the needle holders on the back, all sharp points are ' Point Emitters ' and this might effect the efficiency, it certainly does in sensitive High Voltage equipment used in the Analytical Science world and the ' Balling ' of high voltage solder joints is a must....cheers.
In 1964 I built an ion helicopter after seeing it in popular mechanics as a glimpse of the future. It was too heavy to take off, but it did make a lot of wind.
Hahaha! Thank you Clive. I love that you watch Garage 54! Hello fellas!
always loved the dexterity of your digits !
I love Big Clive's murray-isms. "..i'm gonna grab a high voltage supply, probably a low voltage one" :D
I love your impression of Sean Connery doing an impression of a Russian Nukuler Submarine commander :)
The spelling mistake adds to the authenticity of what I would expect from the Russian Nuclear Corporation selling their wares to the west. If you write an instruction manual, you need to be sure and add even more mistakes 😁 🍺
tbh I might expect a bit more professionalism from Rosatom actually :P
Write one up for us! 👍
Spelling mistake also typical of the Chinese. Designed by Russia to be manufactured in China, hahaha 🤣
Make sure to add stuff like "Apply power. Machine make ozone." or something like it. :D
@@Ithirahad ... except, this is _in no way_ Росатом despite trying to look that way... :D Which makes it fit perfectly. :D
I love the way you name these little projects. So many watchlists!
I've been on all the good watchlists from the dawn of the 'net.
the bmirussian reference was awesome. Thanks for making my night, Clive.
Getting zapped as a small child made me respect electricity, didn't stop me from fooling around with it, but i never got lit up while fooling around because of the aversion to touching live electrical connections i got from being zapped.
Didn't mind the teaching jolt from a 240v mistake. DID mind getting a hand caught on the wrong side of a twelve volt short. It looks so tame until all of a sudden it's on fire.
I’m impressed that you can both hold the board AND maneuver the solder in one hand while the other moves the iron. I usually need to clamp my board
Nice. Been thinking of getting myself one of those modules to try out, and building something like this seems like a cool project.
There's something relaxing about listening to Big C ramble on. He's like that uncle that sits up in the corner of the room in that armchair telling stories about the good old days.
He does have a soothing voice, and the content is entertaining to boot.
Garage 54 reference made me laugh. Truly a man of taste.
Pain is a wonderful teacher, my parents would only warn me once, then it was " I warned you, bet you won't do that again" as I'm bawling in severe pain.
"Now pack those fingers in some ice and here's 50p for the bus!"
@@skylined5534 bawling in the severe pain of the spanking..
At mosh peric. I fucking love it. You should keep it like that and let it be "clives touch".
No one that doesn't know about the error probably won't notice unless it's read twice or pointed out lol.
I don't quite comprehend all that's being said, far from my field of expertise, but this man's accent makes these addicting
All these letters got mixed up in my brane, and I was briefly impressed that you got your PCBs made at the Jet Propulsion Lab
Thanks to videos like this, I sorted my dads LED solar garden lights, with a USB powerbank, and fully controllable switch. So yay, I shall repair the ozone layer with this one, next
One good use for this build, IMO, could be, an "antistatic" Ion generator similar to a "Zerostat" antistatic gun, for use in cleaning Vinyl albums when cleaning before playing. The "official" Zerostat gun is now $181 USD at Fischer Scientific, I'm lucky to have an original that is about 40 years old now. I'm sure your build is MUCH cheaper than that, and also put it into a handheld project box with a momentary contact push button to power it as you hold it over an albums surface while on the platter, then dusting with your favorite cleaning brush.
I think the zerostat may put out alternate polarity as it's squeezed and then released.
@@bigclivedotcom After examination, you are correct. I guess the next step in your build , as a modification, could be to alternate the ionic charge somehow.👍
Nice, straight forward design
This looks fantastic Clive!
Give those lazy air molecules for what!
Much love Technical Family
Remember the hat that the rookie guy wore on "Blue Thunder" with JAFO printed on it? Well we find out in the movie (spoiler alert for 30+ year old movie) that JAFO stands for "Just Another F---ing Observer". With this in mind I think Clive needs to get hats made for his merch with JAFOG printed on it - "Just Another F---ing Ozone Generator" :D
That would be so cool on the Staturday livestreams :D
Made with love, and lead!
That's how you know it's good.
I have always been jealous of your manual dexterity when soldering. I try holding the board and solder in one hand and the iron in the other when nobody is looking, but considering how much trouble I have running the torch, pedal, and filler when TIG welding, I have low hopes that I'll manage to get it right. 😕
Aww! No visualization of the airflow with smoke? I was so hoping!
Watching you soldering is like watching one of those stress relief videos. 😲
Thanks Clive I will have to try this one out.
just watched a video of an ozone generator vs a wasp nest.
wow that really knocked out the whole nest quickly.
amazing
"If there is any interest in the PCB" Understatement of the year 😉
Apparently, they call it «Rosatom State Nuclear Energy Corporation».
всё верно, приятель :)
@@not_just_burnt we don't even know one another.
Actually, on their website it says quite literally: State Corporation of Atomic Energy... cringe.
I've watched too much electroboom. I expected the worst when he picked up the unit when powered :)
I was waiting for you to ZAP yourself, but for someone with fat fingers, you did excellently in not touching the power output. What a lovely breathe of fresh air, LOL... a neat little project Clive, Thanks.
The mispelled versions are going to be worth a fortune in a few years, don't throw them out!
If the babies get a shock, it serves them right. Everybody gets the same chance to learn.
Need a Garage 54 Big Clive collab lol. How many ion thrusters does it take to push a Lada?
All of them, and just how many can you fit on the Lada, before you cannot find the car any more.
*Translations provided by BMI Russian*
Depends on how badly the Lada is wrecked after one of those infamous "Russian-Left-Turn-From-Far-Right-Lane" maneuvers!
Garage 54 ... always worth a watch, nice reference :D
The misspelling adds to its charm!
I just had to laugh out loud.
I opened this video in a new tab to "watch after my 8 other tabs are done watching" and paused the video so it can load properly.
Usually I have Spotify in the background to listen to some music.
Did some work, put on my headphones and pressed "Play" on my keyboard because I wanted to listen to my Weekly Playlist in Spotify.
"Grrreeting Comrades" is all I heard with clives lovely voice. That was unexpected. My PC decided to resume playback from this video instead of my Spotify.
I think I need this as a ringtone or as an oldschool startup-sound when I log in to my PC.
The baby shocking part brought back memories of my eldest son who had a habit of turning on the bedroom light at night when he was younger, so we removed the bulb in an attempt to stop him.
which led to him flipping the switch then climbing onto the top bunk to investigate why the light wasn’t on and promptly poking his finger into the live light socket.
Needless to say, he only did it once!
Get that tiny jigsaw done on a live drinking stream
I'd do the corrections but also get 'previously known as the Atmoshperic Invigorator' screen printed elsewhere on the boards (for shits & giggles).
Hearing Clive imitate Sean Connery made my day! Very funny Clive! You should be the next James Bond - "soda-streamed, not stirred!"
Ha! Love the garage 54 reference 👍
Your not the only one to misspell things on the silk screen, I've done it too. I always submit them too early, pretty much every time i spot something afterwards on the next day, I just add another to the order with the corrections if its bad enough, its only a few quid.
'I spelt it wrong'
you spelt it creatively.
so elegent ;-)
👍 Danke fürs Hochladen!
👍 Thanks for uploading!
👍 Very good and beautiful, thank you!
👍 Sehr gut und schön, danke!
Can we have a desk and/or studio tour at 1,000,000 subs? By the way, I enjoy watching this channel!
The big man from the Isle of Man does it again spicy voltages included !!!! I wish I could could give you more thumbs up but im not welsh :) Time for a wee dram to cellorbrate :) Thanks Clive.
Good Monday evening to you sir from Wellington Somerset
Fun fact: The Ministry of Medium Machine Building was the Soviet Union’s euphemism for their nuclear industry.
Photo catalytic conversion into ozone is preferred method while regulating out the nitrogen and other contaminants. Alternatively, I think the oxygen can be separated from water for a more pure oxygen content to charge into ozone. I also think you could ozonate the water for better result in electrolysis separation.
I will try making one too. Its so cool
Be sure to get machine pins which have appropriately sized holes as there are quite a range of sizes.
Most are intended for small IC legs, while others are large enough for DIL header pins.
I laughed pretty good at the intro, long live Garage 54 comrade!
Beefing up those pads with solder is one of the few times I might use lead free solder
Atmospheric? Or Atmoshperic? Perfect Clive, just perfect!
Keep up the good work fella and stay safe.
Proper Chinglish to be compatible with cheap ebay modules :)
@@hempbear if Clive had done it intentionally it’d have been a coup! Unfortunately it was just a typical electrical engineering typo.
As always, a dry, cynical, look at all things with a buzz. Love it.
I like a lot of project boards but find some of them don't have suitable enough or rigid housing and clunky massive project boxes are too big. A nice vacuformed cover for these type of projects would be massively welcome considering they are easy to make, remake and recycle too. A vacuformed cover with a beard on would be good!
As for seeing soldering, it reminds me of when I was a kid and my dad would be repairing TVs, when we did things like that, and didn't just create e-waste or landfill a load of crap!
Clive, you should have paneled them by stamp hole/mouse bites, that way you would got both boards on one order. The round corners require a gap between the boards so that rules out panel by V groove.
You could also have added boarders for the order number to go on, or indicated on the pcb where you want the order number put, put exactly this text where you want the order number to go "JLCJLCJLCJLC".
they usually add paneling fees if they see sections of the order not connected by copper at all, so more often than not cheaper to order two designs than to panel them in my experience
I didn't panelise them to get nice clean sides and allow the rounded corners. These were just prototypes.
@@beartastic-ftw A way round that might be to run a small track through the mouse bite area.
Quick tip: If you add “JLCJLCJLCJLC” anywhere on the silkscreen layer, JLC PCB will automatically place the order number there. I generally place mine under a large component like a connector so it’s hidden when the board is assembled.
I think you also have to specify it in the order. But it would make sense for them to do it automatically if they saw it.
Brilliant thank you.
I hope that test comes back more! I want see it with that super overkill industrial ozone generator
First and I didnt know you used voice over from BMI 👍
Good stuff though and that's a nice build project. Now I want to make one myself
I was just spoofing Garage 54. Although I did just get approached by a company that does translation and voiceovers for the Chinese market. I'm not sure they'd be allowed to watch my videos.
Da, good working for todays, Comarade!
Friend Clive,
I have no intention of building this thing, but I had to pause the video to say, "Please don't correct the spelling!" Or, at the very least, offer it as alternative version. That is just too good and it fits so well.
The original file with spelling mistake is still available.
You had me at Ion Thruster Technology...
Love the garage54 bmi Russian reference
Rushin nuckle ear ion thruster. Sounds legit to me. ⚡️⚡️⚡️
Haha! Loving the Garage 54 reference :)
Clive, I have a rfid blood glucose monitor that a friend got from the nhs for monitoring his diabetes. It's one of the first released as he was accepted in a trial run for them. I assume it uses some kind of galvanic response to measure his levels. Would you be interested in taking it apart and having a look? I have a pic I can send? It seems like an interesting device
Was having a bit of a troubling day, Sir, your shocked baby remark was exactly what I needed. I think when a funny remark kind of comes quite unexpected, it is even more funny and clever. I appreciate you so much.
How thick are those pcb's? They look thicker than any hi volume boards I've come across in recent memory. And your perfect consumable needles/socket solution looked and sounded sturdy and secure.
Standard 1.6mm laminate.
Std 1.6. Hmm. LOokEd thicker. Did they come with those beautiful edges and radiii? Almost had a ceramic sound when boards clicked your bench or each other.
If the baby withdraws its hand and cries, it's normal.
If it instead reaches in for another zap, it's One Of Us.
@@markfergerson2145 one of us. One of us!
Good to see you complying with right to repair Clive ;)
More like "right to make our own stuff".
I'd love to spend 10€ to buy the thing you just built, ready-made including a HV power supply, although I'd prefer one that runs on 5V USB power instead of 12V.
Instead of having the PCBs printed and then having to scrounge screws, connectors, needles and stuff. I'd even love the spelling mistake, makes it soo original!
At some point Clive do you think you could do a video where you basically give us a master list of all the handicraft tools and consumable supplies you recommend for both actual soldering but also for making PCB's? I have tried to keep up over the years but it would be massively helpful if you could basically provide a shopping list. It would be a real antidote and dose of reality in contrast with the insulting pie-in-the-sky nonsense we got when eeVBlog did the same thing in the past.
I have been away from electronics for a couple of years now but having finally managed to get decent solder again am raring for another crack at it.
Could the 2 circuit boards be combined in to one gerber file, joined with "mouse bites", to save on the production costs?
Its kinda a luck of the draw thing if they upcharge you because there "separate boards", the best bet is leave then connected then when you get them cut it with a band saw.
Yes Clive could have paneled them by mouse bites / stamp hole onto the 100mm x 100mm pcb
The jigsaw puzzle seems more up Ralfy's street- when's his birthday, ideal present
Thanks to Clive, I just bought an 'industrial' ozone generator that produces 6000 mg/hr ozone using a replaceable ceramic generator plate. I have a couple places that need a serious cleansing of mold odors and for $60, I couldn't imagine a better solution. The plate has an avg life of 40,000 hrs, and has a timer.
UPDATE: Holy crap- this unit produces an insane amount of ozone! A few seconds and it starts to irritate your throat. The ceramic plate looks to be about 2x4 cm and the entire surface glows. It comes with a door hanger that says, "DO NOT ENTER! Ozone sanitation in progress!" I can't wait to take it apart to see what-all is inside!
I got this one: www.amazon.com/gp/product/B00JAP7388/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1
Clive, you should do a video one one of these- it is an ozone monster!!
UPDATE 2: Just took the lid off. It has a monoblock power supply driving the ceramic plate that has long thin conductors plated onto it. The fan is grounded, too. The ceramic plate generator is attached to a fairly large heatsink. Not much to see in terms of components but the construction is certainly robust!
I ran what is probably the same unit in a stinky old car for half an hour. You could smell ozone for days afterward, even after leaving the doors open for a couple of hours.
@@LiLi-or2gm I looked at the module from a similar unit recently.
@@LiLi-or2gm At some point you may need to replace the power supply. They seem quite temperamental. But the case and basics are a good start.
G'morning Clive and all TOVARISCH'S out there!!!
Serves then right, let em learn the hard way !
LOL Avid viewer of Garage54 here too. (Voiceover by BMI Russia.)
Alwayz watching master....🙂🙂🙂❤❤❤
I have no idea what youre doing or what youre doing it for, but i fucking love it.
"It serves them right" What a great corporate slogan!