pano po ung data nilalagay sa Tag/Card? parehas po kasi ito nung tutorial na isa, but hindi po namen magets pano i adjust ung data sa Tag/Card eh .. wala po tuloy ung StudID, Name, Phone Number, Address.. tnx!
@@eattendancesystem yes po. Ang pinagkaiba lang po is kung anong ginamit mo na microcontroller. Iba po kase yung pins nya tsaka iibahin mo rin yan sa code. If ESP8266 lang din ginamit mo, sundan mo nalang lahat ng ginawa ko
@@zkurtdelmo hello po pano po i fix yung "rfid-attendance-v4:27:9: fatal error: LiquidCrystal_I2C.h: No such file or directory 27 | #include | ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. exit status 1 LiquidCrystal_I2C.h: No such file or directory " dun po ito sa i papaste na yung deployment id then i coconnect sa wifi, pag na i uupload ko na po, ayan po yung lumalabas. nasa taas lang po sya nung google sheet id deployment, nag rered po kasi pag inuuploadd,
Siguraduhin mo po na maayos na nakaconnect ang mga jumper wires sa mga pins ng modules. Baka kase may hindi nakaconnect ng maayos kaya hindi sya madetect.
thank you sir. pde ba lagyan ng e lock function yung ganiton set up? gusto ko sana i connect sa door lock yung system para pag nag tap ng rfid mag open ang lock then ma record yung data. thank you
SANA MA REACH KITA IDOL. Tanong ko lang. " PAANO NYO NA ACCESS ANG DATE AND TIME PO NG WALANG RTC MODULE???. GAMIT KO PO KASI MEGA2560.WALA SYANG ACCESS NG DATE AND TIME BA OR SA CODE TALAGA?
Yes bro, the script was from Ahmad Logs. I didn't say that the script was mine. Also, it was clear in the video and in the description that I've put full credits to him. I made this video tutorial for my fellow Visayan people to fully understand how to make it work.
@@jaynardsandoval5482 madali lang naman buoin yan kase ikakabit lang naman yung mga jumper wires sa breadboard at meron naring guide sa wiring diagram. Nandun na lahat yun.
Daghang salamat ani nga idea bossing
you're welcome po!
Thank you for sharing this video. But I have a question: how do you add a new card each time? Thank you very much!!!
@@TaiNguyen-nz4fg you can add a new card by using the arduino IDE
@@zkurtdelmo Oh, so does that mean i have to re-upload the code every time you add a new card?
@@zkurtdelmo Is there any other way? Doing it like this is quite inconvenient...
@@TaiNguyen-nz4fg you don't need to reupload the code on the other tag, just add another code for the new id tags
@@TaiNguyen-nz4fg yes it was. I suggest you finalize the list of individuals when you make this so that you don't need to do this again.
pano po ung data nilalagay sa Tag/Card? parehas po kasi ito nung tutorial na isa, but hindi po namen magets pano i adjust ung data sa Tag/Card eh .. wala po tuloy ung StudID, Name, Phone Number, Address.. tnx!
@@auriellesquillo8434 sundan mo lang po yung video starting from 5:25
hello po, okay lang po ganitong program po ang gamitin namin kahit po gumamit kami ng nodemcu?
pero po may lcd kami, ayos naman na po yung power supply ayos na rin po, sa program po okay lang po bang sundan po namin itong ginawa nyo po?
@@eattendancesystem yes po. Ang pinagkaiba lang po is kung anong ginamit mo na microcontroller. Iba po kase yung pins nya tsaka iibahin mo rin yan sa code.
If ESP8266 lang din ginamit mo, sundan mo nalang lahat ng ginawa ko
@@zkurtdelmo noted poo tysm !!
@@zkurtdelmo hello po pano po i fix yung "rfid-attendance-v4:27:9: fatal error: LiquidCrystal_I2C.h: No such file or directory
27 | #include
| ^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
LiquidCrystal_I2C.h: No such file or directory
"
dun po ito sa i papaste na yung deployment id then i coconnect sa wifi, pag na i uupload ko na po, ayan po yung lumalabas. nasa taas lang po sya nung google sheet id deployment, nag rered po kasi pag inuuploadd,
@@eattendancesystem di ka pa ata nag add library ng para sa LCD.
Kindly watch po bandang 4:45 ng video para sa pag add ng library.
Hindi maDetect ung rfiid tag
Siguraduhin mo po na maayos na nakaconnect ang mga jumper wires sa mga pins ng modules. Baka kase may hindi nakaconnect ng maayos kaya hindi sya madetect.
thank you sir. pde ba lagyan ng e lock function yung ganiton set up? gusto ko sana i connect sa door lock yung system para pag nag tap ng rfid mag open ang lock then ma record yung data. thank you
@@digiworkzphotos7791 pwedeng pwede po
@@zkurtdelmo sir my msgr po kayo?
@@digiworkzphotos7791 sorry sa late reply. Yes meron po.
SANA MA REACH KITA IDOL.
Tanong ko lang.
" PAANO NYO NA ACCESS ANG DATE AND TIME PO NG WALANG RTC MODULE???.
GAMIT KO PO KASI MEGA2560.WALA SYANG ACCESS NG DATE AND TIME BA OR SA CODE TALAGA?
Wala pong RTC Module ang ginamit kong ESP8266. Ang nagbibigay po ng time dyan is yung Google Sheets mismo. Nasa script po yan.
yung time di parehas from your computer and excel how to solve?
change mo yung timezone sa script ng sheets to asia/manila
@@zkurtdelmo done sir still the same problem
@@bapbaptv2516 go to app script > project settings > time zone
@@zkurtdelmo Done sir and restarting hoping will take effect
@@zkurtdelmo still the same time its advance 4 hours in our current time now
bro U copied the video of Ahmad Logs...it can be clearly seen in the script....it's the version 4 of the rfid attendance system video he made
Yes bro, the script was from Ahmad Logs. I didn't say that the script was mine. Also, it was clear in the video and in the description that I've put full credits to him. I made this video tutorial for my fellow Visayan people to fully understand how to make it work.
Bossing may tutorial po ba kayo pag assemble ng mga wire etc, at pag build nung rfid salamat po
Gamit kalang ng jumper wires at breadboard
@@zkurtdelmo i mean kung paano buoin yung rfid at attachment ng wire sa bread board, step by step ba
@@jaynardsandoval5482 merong wiring diagram sa description box. Follow mo lang yun.
@@jaynardsandoval5482 madali lang naman buoin yan kase ikakabit lang naman yung mga jumper wires sa breadboard at meron naring guide sa wiring diagram. Nandun na lahat yun.
@@zkurtdelmo salamat ng marami kuys❤️
esp32 ?
@@p_Vincentt esp8266