Im trying to wire all 3 hoist up to this same exact remote system. How many solenoids do i need to order and do you have a part number from online??? Please help lol. I would really appreciate it!!!!
Hello, could you help me. Exactly the same device. The problem lies in the remote (or this is my assumption) As soon as I insert the batteries, the indicator quickly flashes red. I checked everything written in the instructions. There are no sticking in the buttons, and the emergency button does not remain pressed at least a schematic diagram of the internal electronics of the device, please!
If you use start run capacitor on motor contactors are not needed. did this method and tested by me. also down safety switch will have to be across brown wire.
Hmm. So this exact remote system can be 12v or 24v. There is supposed to be a switch inside of the receiver box to select either one. So I purchased a 12 volt DC supply power box to operate the receiver. My winches are all 110v AC. Do I just wire this to the winches or is this the wrong output voltage to operate these winches.
thanks for sharing your experience. the video is very informative.
❤❤❤
Im trying to wire all 3 hoist up to this same exact remote system. How many solenoids do i need to order and do you have a part number from online??? Please help lol. I would really appreciate it!!!!
Great job good luck👍
Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.
Good Job 👍 ❤️
Hello, could you help me. Exactly the same device. The problem lies in the remote (or this is my assumption) As soon as I insert the batteries, the indicator quickly flashes red. I checked everything written in the instructions. There are no sticking in the buttons, and the emergency button does not remain pressed
at least a schematic diagram of the internal electronics of the device, please!
ممتاز ياحجي مجيد ،بالتوفيق
If you use start run capacitor on motor contactors are not needed. did this method and tested by me. also down safety switch will have to be across brown wire.
Hmm. So this exact remote system can be 12v or 24v. There is supposed to be a switch inside of the receiver box to select either one. So I purchased a 12 volt DC supply power box to operate the receiver. My winches are all 110v AC. Do I just wire this to the winches or is this the wrong output voltage to operate these winches.
Mardak, could you please explain the purpose of the main and com wires coming out from the receiver? Thank you, Chek
Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.
how many meters can reach by these remote control
Didn’t count but more than 30
You need to change lever switch instead a normal limit switch.
Hi. I pay like this remote control. But it not work. Do I need to add a condoctor?
Hi thanks for your comment I am not an electrician but this is the only solution I find for this type of remote control
Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.
@@yeagnes8797 how to change from on/off button to toggle button.
Pleas how can i find stop switching in amazone?
RADWELL VERIFIED SUBSTITUTE XCKP2118N12-SUB Substitute for Schneider Electric XCKP2118N12, 1/2NPT, Fixed Rotary Lever, Limit Switch, SNAP Action, 1NO/1NC a.co/d/4FgeJYF
عمل ممتاز
Hi. Can you help me with instalation 24v ? Wiring diagram ?
We can help you sir
من أين نحصل على الريموت حجي وكم السعر من فضلك
في محل في سلماباد سعره تقريبا ٣٥ دينار