Thank you😁, i wanted to sell this case because i wasnt satisfied with the looks but nobody wanted to buy it, so i thought fuck it, lets cut it open and modify it😅😂
Good looking build mate!👍🏻 I have read it is not recommended to mix and match fans in a push/pull configuration, have you had problems with that? And also because they are not PWM fans. I am kind of struggling with that idea..
Thx mate😁, you mean by the radiator? I have to confess, i just did the push and pull because my case would hide the top fans. The top bracket is too deep so i mounted 3 extra fans on it to get everything down a little. I read on the internet that the temps are better 2-3degrees with the push and pull. But i didn’t noticed that. Mostly my pull fans are not even on because they are too loud lol.
You can’t, without a fan controller its full speed, thats why mine is turned off, because its too loud for me and it is annoying. But i play with the idea of getting 3 more lian li sl120 fans for the radiator to push, and the nzxt fans go to the top to pull, and the case fans i take out completely
Nice case mod and wonderful pc build! I have the same case but in black, how did you modified psu cover? I want to do the same with mine, to show up my rog thor psu
Hello! Thanks for video! I have a question regarding chassis!? In the chassis is the window for the ASUS GAMING 1000G - ATX 3.0 Power Supply - 1000 Watt! I was surprised that this window exists! Where did it come from!? Asus chassis 501 that I checked no similar window in chassis! Thanks for the reply! 👍💙💛 
Hi this is really nice modification. I have same case and 360mml cooler. I am wondering is the airflow configuration is okay. You have 3 intake and 4 exhaust fans doesn’t it make negative pressure. Does the vertical gpu mounting give you better air flow? Could you please give me more detailed instruction on carving on front cover. Thank you 👍
Its not negative pressure if the intake fans have more rpm than the exhaust fans, you should always push the air through the radiator, not pull imo, vertical gpu mounting gives you the same airflow in my opinion, it just looks cooler, the carving is a different metal plate, it is not carved in to the case metal, i cutted out the case metal by the writings so i have more airflow and the letters and logo lights up, and fixed this plate on it with 4 pop rivets. It is a design that my gf drew in photoshop, then converted into dxf file. The metal plate is 11,5cmx41,5 cm plate i think, they cutted out for me by a metal sheet company, they have a CNC laser some kind, im no expert in that, check out my instagram for more photos and the other comments where i have a more detailed describtion.
@@tempflidominic808 Thank you for the reply. I have more question. I saw you sandwiched the radiator between 6 fans. What is the reason for that? can give me more detailed info for Rob fan connection and how do just all the rpms of the fans?
I had 3 extra fans with the case, and the top exhaust frame of the case was so deep that my nxzt fans didnt showed when i looked my pc from the side, so i put those fans there, to get the whole thing down a little, you dont get much improvement by the temperatures tho, the rpm i adjust by lian li software l-connect2, and for the nzxt fans i use NZXT CAM, if your fans are directly hooked up to the motherboard then you can adjust it from for example asus armoury crate. I have my fans hooked up in a fan controller.
Hi, just wondering, how can I get the 3 RGB fans that come with the case to work with aura sync? I’ve tried plugging them into the argb headers and the rgb headers on my motherboard, but the only way I can get them to light up is when I plug the RGB cables into my psu, which forces me to use the controller and not any softwares.
Maybe try to by a fan controler and connect that to the motherboard, i dont know really, i just keep those fans on white all the time, they dont show in my case anyway.
First you need to separate the metal from the plastic frame by the front panel, on the back just bend away the metal pieces, then just pop the metal out. You need to cut open the plastic frame and the metal front panel too…by the plastic i used a hooked plastic cutter knife but be gentle to not break it… very practic in my oppinion and the metal with a dremel. My girlfriend drew this art for me in photoshop from different artworks combined (how i imagined it, if you want a different artwork it could work too i think),i conwerted it into DXF format online. A local metal sheet worker cutted it out for me with a kind of laser CNC (im no expert in that) after that i painted it white. Combine the new frontpanel to the old front panelwith 4 pop rivets, on the back glue 2 vertical led strips(i used the lian li lan2-2x) and its done. For more pictures you can look at my instagram link in the description.
I have the same case,Damn you made it so much better with those mods😍
Thank you😁, i wanted to sell this case because i wasnt satisfied with the looks but nobody wanted to buy it, so i thought fuck it, lets cut it open and modify it😅😂
Good looking build mate!👍🏻
I have read it is not recommended to mix and match fans in a push/pull configuration, have you had problems with that? And also because they are not PWM fans. I am kind of struggling with that idea..
Thx mate😁, you mean by the radiator? I have to confess, i just did the push and pull because my case would hide the top fans. The top bracket is too deep so i mounted 3 extra fans on it to get everything down a little. I read on the internet that the temps are better 2-3degrees with the push and pull. But i didn’t noticed that. Mostly my pull fans are not even on because they are too loud lol.
@@tempflidominic808 How do you control the fans that came with the case?
You can’t, without a fan controller its full speed, thats why mine is turned off, because its too loud for me and it is annoying. But i play with the idea of getting 3 more lian li sl120 fans for the radiator to push, and the nzxt fans go to the top to pull, and the case fans i take out completely
@@tempflidominic808 Please let me know how that works for you. Thanks for the help mate👍🏻.
Nice case mod and wonderful pc build! I have the same case but in black, how did you modified psu cover? I want to do the same with mine, to show up my rog thor psu
I did, i cut it open with a dremel and sanded it down a little, but looking back maybe it would have been better with a hooked plastik cutter knife.
@@tempflidominic808 thanks!! nice video
Hello! Thanks for video! I have a question regarding chassis!? In the chassis is the window for the ASUS GAMING 1000G - ATX 3.0 Power Supply - 1000 Watt! I was surprised that this window exists! Where did it come from!? Asus chassis 501 that I checked no similar window in chassis! Thanks for the reply!
👍💙💛

Yeah, i cut a hole in it lol, with a dremel, i have a 850w PSU
Hi, i cant see your Instagram can you share the design with link doc or something. Thanks
You mean the drawing? The design on the front plate?
@@tempflidominic808 yes thahts what i meant , also your instagram link
@@tempflidominic808yes can you share your design?
@@tempflidominic808i am still waiting bro 😭
@@enesmelihturan6029 i dont really own the design, its my gf design
The GPU Vertical SideStand A++
Front Facia "ROG" MOD A++
Hi this is really nice modification. I have same case and 360mml cooler. I am wondering is the airflow configuration is okay. You have 3 intake and 4 exhaust fans doesn’t it make negative pressure. Does the vertical gpu mounting give you better air flow? Could you please give me more detailed instruction on carving on front cover. Thank you 👍
Its not negative pressure if the intake fans have more rpm than the exhaust fans, you should always push the air through the radiator, not pull imo, vertical gpu mounting gives you the same airflow in my opinion, it just looks cooler, the carving is a different metal plate, it is not carved in to the case metal, i cutted out the case metal by the writings so i have more airflow and the letters and logo lights up, and fixed this plate on it with 4 pop rivets. It is a design that my gf drew in photoshop, then converted into dxf file. The metal plate is 11,5cmx41,5 cm plate i think, they cutted out for me by a metal sheet company, they have a CNC laser some kind, im no expert in that, check out my instagram for more photos and the other comments where i have a more detailed describtion.
@@tempflidominic808 Thank you for the reply. I have more question. I saw you sandwiched the radiator between 6 fans. What is the reason for that? can give me more detailed info for Rob fan connection and how do just all the rpms of the fans?
I had 3 extra fans with the case, and the top exhaust frame of the case was so deep that my nxzt fans didnt showed when i looked my pc from the side, so i put those fans there, to get the whole thing down a little, you dont get much improvement by the temperatures tho, the rpm i adjust by lian li software l-connect2, and for the nzxt fans i use NZXT CAM, if your fans are directly hooked up to the motherboard then you can adjust it from for example asus armoury crate. I have my fans hooked up in a fan controller.
This is exactly the same pc build im going to get at the end of this month. lol.
Glad to hear it😁 can i see it when it is done?😎
sure@@tempflidominic808
wtf sexiest case i have ever seen😯
thank you :D
How much did that cnc front plate cost?
20-30dollar maybe, i dont remember clearly🤔
Hi, just wondering, how can I get the 3 RGB fans that come with the case to work with aura sync? I’ve tried plugging them into the argb headers and the rgb headers on my motherboard, but the only way I can get them to light up is when I plug the RGB cables into my psu, which forces me to use the controller and not any softwares.
Maybe try to by a fan controler and connect that to the motherboard, i dont know really, i just keep those fans on white all the time, they dont show in my case anyway.
I have this same case in black I need my front panel to light up like yours😭 how’d you do it?
First you need to separate the metal from the plastic frame by the front panel, on the back just bend away the metal pieces, then just pop the metal out. You need to cut open the plastic frame and the metal front panel too…by the plastic i used a hooked plastic cutter knife but be gentle to not break it… very practic in my oppinion and the metal with a dremel. My girlfriend drew this art for me in photoshop from different artworks combined (how i imagined it, if you want a different artwork it could work too i think),i conwerted it into DXF format online. A local metal sheet worker cutted it out for me with a kind of laser CNC (im no expert in that) after that i painted it white. Combine the new frontpanel to the old front panelwith 4 pop rivets, on the back glue 2 vertical led strips(i used the lian li lan2-2x) and its done. For more pictures you can look at my instagram link in the description.
Dam bro u did very hardwork❤
Any way to help me do my build
You mean choosing the parts or helping to build? haha
Can i put Arctic Liquid freezer II 420 A-RGB on this case ?
no, only 360 rads