Beginner Airbrush Problems SOLVED
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- Good afternoon! I'm so excited to share this week's video: Basics for airbrushing and solving all of your common airbrush problems! Paint bubbling, paint spider webbing, what psi to use, needle bent, airbrush clogged? I've got you covered.
Be sure to check out the sponsor of this week's video, Into The AM!
My link for 10% off: intotheam.com/LylaMev10
________________________________
Patreon: bit.ly/2LVP0Dn
Instagram: bit.ly/2JJV4MM
Merch: bit.ly/3sC38n6
________________________________
My Tools (some of these may be affiliate links):
Iwata HP-CS: amzn.to/3FC4YLq
Vallejo Airbrush Flow Improver amzn.to/2ljRIaL
PaascheTalon Airbrush amzn.to/2kfSiWI
PointZero Portable Airbrush Air Compressor amzn.to/2XVLBqo
Adapter for Paasche Talon: amzn.to/2LiiAoo
Iwata-Medea Airbrush Cleaner: amzn.to/3p14eJs
Red Grass Games Everlasting Wet Palette: bit.ly/2V8eTUi
Winsor Newton Series 7 Kolinsky Sable Watercolor Brush - Round #1 amzn.to/2n2pQIU
Winsor Newton Series 7 Kolinsky Sable Watercolor Brush - Round #0: amzn.to/2T1mfHv
Prisma Color Micro Pen: amzn.to/3gjIPFc
Green stuff: amzn.to/2liTj0v
Milliput: amzn.to/2lNGifB
Testors Dull coat: amzn.to/2lN6Mhe
Thinner Medium: amzn.to/2lNWNZ2
Glaze Medium amzn.to/2jP4Bcr
FW Daler Rowney Acrylic Ink amzn.to/2Rn2smF
The Master's Brush Cleaner & Preserver: amzn.to/2YmPoz0
Under cabinet light: amzn.to/2leEWdg
Brightech Light / Black light: amzn.to/2kdjvsY
Dahle Vantage Self-Healing Cutting Mat amzn.to/2kgv2b8 s
MagniPros LED Illuminated Headband & Magnifying Glasses amzn.to/2YFevR1
________________________________
00:00 Intro
00:25 #1 Paint Not Spraying
2:41 #2 Spider Webbing
4:10 #3 Gun Spits Water
5:30 #4 Gun bubbling Paint
6:09 #5 Needle is Stuck/Trigger is Loose
6:49 #6 Sticky Paint
7:41 #7 Pain Sprays Without Pulling Back Trigger
Background Music: Kevin Macleod, Serpent Sound Studio - แนวปฏิบัติและการใช้ชีวิต
Be sure to check out the sponsor of this week's video, Into The AM!
My link for 10% off: intotheam.com/LylaMev10
What should I do if I don’t have a water trap on my brush or compressor? When I hold the trigger sometimes randomly it just spits out water
Helpful tips for beginners:
-Premix your paint in a separate container(like a small platic cup) and let it sit for a while, stirr again and then put in the airbrush. Depending on the paint/reducer type this can make a big difference.
-Write notes on how much you thinned your particular color and how did it work, especially if your working with different manufacturers paints, but even different colors have different consistency.
-The pressure you're spraying at is measured when the air is on. So you press the trigger down, hold and set your pressure. You can set many of these small compressors to for ex. 2bar/30psi but after a while (when the air goes on) it drops to a way too little pressure, because the compressor cannot keep up with the volume of air required. Depends on how much your airbrush consumes in CFM
-If you have a compressor with no tank, the best thing you can do is put a hose (10m/30feet) in between your compressor and your pressure regulator, this functions as a small tank and gives the air a chance to cool down before the moisture trap. A moisture trap which is directly attached to the compressor(hot air) is not able to catch all the moisture. The air needs to cool down in order for droplets to develope. Hot air will just blow past the moisture trap.
-You don't want pressure drop, it makes painting inconsistent and annoying. There is no point setting your pressure to for ex. 2bar/30psi if your compressor can only provide 1.2bar/17psi @ full consumption (what ever CFM your airbrush flows) Only thing it does, is you start with high pressure and suddenly it drops just a couple of seconds after you've started to paint.
-Make sure you have a quality cleaner that works very well with your paint! Many general airbrush cleaners are very mild and do not do the job properly. This is extremely important, you don't want to constantly disassemble you airbrush! and believe it or not, but it's almost never really needed if you're doing everything correctly.
-Don't use Q tips to clean inside you cup, this is one of those weird things that doesn't cause any problems for months and then suddenly one time those fibers go inside the airbush and cause problems and then you have real mess in your hands because no cleaner dissolves those fibers.
-The needle lube is used to lube the needle packing srew.
-Don't use needle reamers, it's not good in the long term. The cleaner must be able to dissolve the paint.
-If you have freeflow=paint comes out when you press the air on, it is not because you'r needle is not seated all the way. The needle does not just magically move on it's own. It's because there's paint on the nozzle or the needle does not move freely in the needle packing screw, not allowing it to return to the nozzle or the spring tension is too low. Yes sometimes a quick fix (for a while) is to re seat the needle. If you'r airbush is clean and you test it with water very close against a black table and there is no freeflow, this setting is not going to change on it's own. If this freeflowing happens often you'r needle packing screw is leaking and letting paint dry back there and then the needle sticks.
-Airbrushes are delicate, don't use any force with them.
-There is no need to soak the whole airbrush in cleaner.
-You don't need ultrasonic cleaners, you just need a cleaner that actually works.
-Use a respirator and make sure it seals into your face.
By far the best airbrush problems fix video out there! Short, no unnecessary talk + good explanations about whats causing the problems. Thanks!
Oh my, thank you so much for the hint of releasing the water of the compressor. I didn't even know that such a thing exists and was constantly wondering why my airbrush recently started to spray so much unwanted water. Thanks again! Your videos are great!
That one took me a while to figure out as well!
If you frequently forget or it's constantly getting full and you don't want to deal with it they also make self draining air drivers that you can put a hose on but this is probably overkill for airbrushing
Best video for this. Thank you.
No waffling. Straight to the point and separated perfectly 😎
Seems to point out all the common problems I came across the hard way: good service to the new folk.
Too thick paint, through a tiny needle, at low pressure almost made me swear-off airbrush when I started.
I strongly suggest this important mantra: Air on - Paint on - Paint off - Air off. Not following the sequence leads to many kinds of tip dry or clogs do not perform air/paint on all at once.
"Glycerine" is a good lube to spray a drop or so through the bottom of the cup prior to paint loading (cheap too!).
It prevents the paint from sticking to the needle and nozzle and acts as a bit of a paint slow-dry, it is the primary ingredient for any needle "lube".
I hope things work out well for your viewers.
Do you think Vaseline would work as a lube alt?
Things I have in common with Lyla Mev:
- learning how to use my airbrush
- LOVE those Loot minis and busts
- left hand/thumb often covered in paint :D
Thanks for another useful lesson!
While I am not a beginner, I have learned a great deal about resolving airbrush issues by watching your videos. I was really impressed by seeing that you use a respirator while airbrushing. I stopped mid video and ordered one online. I have been having some minor sinus and breathing problems. Thanks for reminding me to be safe from particulates while painting.
try a paint booth
@@ahsokatano6059 If they are too pricey or a one time project, simple to create one with your shop vac, a cardboard box, duct tape and a small replaceable air filter from the hardware store.
Nice work! Airbrushes can be really frustrating if you don't know why what you're experiencing is happening. So this is a great resource for people who are new to using one.
Very clear and concise. You are a natural teacher.
Oh trust me, I've encountered every one of these problems and it's part of the agony and ecstasy of using an airbrush, I find. There's plenty of times I curse the thing and put it aside, and then have to pick it up and do whatever I gotta do to get it working again. As usual, a well done and informative video from you, thank you!
For cleaning dry needle tip you can also use the make up sponge - works pretty well!
Great, informative video. Some things I've learned when using an air brush, I noticed that when you remove the needle from the air brush you withdraw it from the rear of the air brush body. The problem with doing this is that any paint on the needle will be wiped off and deposited on the internal seals of the air brush which can cause a build up of paint on the needle seals. I always remove the nozzle first and then pull the needle out from the front of the air brush which prevents paint build up on the seals. I mostly use acrylic paints so I flush the air brush out using water, first I flush out the paint cup until the water runs out clear, then spray through with water until the water is clear. Isopropyl alcohol (IPA) dissolves acrylic paints, so some kitchen paper towel with some IPA on it cleans the needle very effectively I find. I use IPA and small nozzle brushes to clean out any paint from the needle nozzle. Once the air brush is reassembled I also spray though a small amount of IPA just to dissolve any last remaining particles of paint and flush them out, then flush with more water. Hope this helps.
Oh THAT'S why my airbrush always spit paint out when initially pressing down. Thanks Lyla!
Glad I could help!
I didn't even realize my air compressor had a water trap, I was like "Oh that's what that does"
Spitting airbrushes might also be from not properly stopping properly. You need to gently roll the trigger forward and up to a stop when you're done painting. You cannot just simply lift off the trigger. It will leave paint in the nozzle, which will splurt out the next time you press down. If you slowly ease off forward and up on the trigger to a stop, it will leave very little, if any, paint in the nozzle. You can practice this on a piece of paper. Try doing it on/off then try doing it slowly ease into on, and slowly ease to off. World of difference.
@@Philtho Interesting, Thanks Rap!
I've been trying to figure out why my gun spits water out for a few days now and never figured it was the compressor water catch, not sure how I overlooked that simple problem. I figured it was me overthinning the paint or something. You're amazing. Thanks a million
Great video, i'm definitely saving it to my "watch again later" folder.
This is a great video, thanks Lyla!
Great collection of problems and solutions! Hopefully this will help keep me from completely disassembling my airbrush any time there is an issue
I have found very few problems that can't be solved with a full break down and clean!
This was so helpful! Thanks a lot, great content overall
This is the video I needed. Thank you so very much!
I have never in my life needed another TH-cam video more! This was awesome, thank you!
These are wonderful tips. I really appreciate your simple but not condescending explanations. Instant subscription ♥️ glad to have found your channel.
Thank you so much, Lyla! I’m new to airbrushing and have literally run into all of this things in the last two weeks. Your illustrations and walkthroughs are super helpful!
Your video solved my splattering problem. Thank you so much!
Pretty baller that I'm using the same airbrush and compressor that you are. Makes it easy to figure out the issue!
This is very helpful, thanks. People always talk about the consistency of paint, but never actually show it. This video makes me realize I've been thinning my paint way too much.
New to the craft and very thankful.
Just got my first airbrush and this is so much help, ive had troubles with spider webbing and coudnt figure it out. Great vid.
Thank you for giving a great break down on the air brush and air brush painting!!!
Thank you for the video. It just happened to appear in my feed and very happy I clicked on it. Just starting out and you provided many great tips. 😊
wow, your video is so simple and informative, I will try all this tomorrow. This is one of the best videos I've watched on youtube regarding these issues.
Thank you
Smashing tutorial on common problems when airbrushing, it has answered one or two questions which I was encountering recently. many thanks and keep up the good work.
Thank you for making this video. Many of the issues I've had, you covered here nicely. I'm also glad that some of the methods I've used to fix the problems I faced are reinforced by what you recommended.
Thanks for that. Best air brush’ fix ‘ video I have ever seen. Reckon I will watch it a few times.
This was sooooo helpful, I feel ready to take my airbrush out of the box and try to get it working again. Thank you!
I use my airbrush to paint nails and recently had a clogging issue - this video saved my airbrush machine I think!!
Lyla! Your editing has jumped in quality yet again! This is great!
Bless you, my problem solver. Love the illustrations. Thank you.
Thanks do much for this video! This is such a great little checklist for troubleshooting.
Great troubleshooting video. Thanks Lyla! I'll have this on the side as i'm airbrushing for quick reference (the timestamped chapters also help immensely).
Great video for new airbrush users. Thanks!
Ciao your airbrush tutorial is beautiful! Thanks for your valuable advice .. Keep it up!
Really loving the drawings of what you're talking about, most videos do a terrible job of explaining
Amazing teaching skills here. Bravo
Exellelent tutorial ! Great art work by the way 👍
This video alone made me subscribe. So helpful!!!!!!!!!
Very helpful Lyla, I think I’ve had all these problems and you provided a solution to them all 👍
Glad I'm not the only one who has found such creative ways to mess up their airbrush.
Thanks Lyla, I learned a few things i didn't know here. Happy airbrushing!
Really good tips! Thanks for sharing!
This video came into my life at just the moment I needed!
Another good video. Problem 7: Most of the time this is exactly what happens, but if you push the needle too hard into the nozzle you can warp and or crack the nozzle giving the same problem, but sometimes the spray pattern is to one side. If damaged you should get a new nozzle and needle. Keep the old needle as a backup if it looks good. If it looks bad, clip the tip and soften it with a finger nail sponge. Use that for deep cleaning the airbrush body and replacing internal O rings. When replacing O rings, put the O ring on the needle and slide that in part way. Take the nut on the packing tool and push the needle in. I have had better luck with this method not leaking on new O rings, or Teflon bushings. The needle fits better than the packing tool, and I think that helps in some way. You can inspect the needle and cap with most modern cell phones magnifying camera. Fingernail sponges can be used to dress up a slightly messed up needle. I have fixed needles dozens of times. When you have 6 airbrushes going at once you get good at keeping them going. OH, and if you need to get up and walk away for a bit, make sure your cup is not close to empty. Keeps it from making clumps in the paint.
Thank you for this video! Hopfully some of these tips will help out! 🤘🏽
Nice video. Concise, Got to the point. No mindless chatter or redundancy but excellent complete explanations. The line drawings help a lot. Thx
These are really great tips. Even for experienced users. Thank you for sharing
Lyla, I’m a new airbrush guy (61yrs) and your video is AMAZING!!
this is really good, thank you, great diagrams.
This was immensely helpful. Thank you.
That might be the best Airbursh Basics video ive seen until know. Very very good work - thanks.
I just wished it had it when I started :D
Very informative, Thanks!
Good information. I have one critcism: don't use paper cups in which to mix your paint. They fall apart and the fibers in the paper invariably get into the paint and wind up collecting in your airbrush. I do enjoy your channel and I have learned an awful lot from them. Cheers, ma'am! Va. Cork
Amazing video! Thanks for getting straight to the point. I use a cheap airbrush and an air compressor with a battery. It does the job, however, sometimes it almost doesn't produce the paint even when there are a lot of paint and sometimes there are drops of the paint out of the hose. Trying to figure it out
I can’t thank you enough. Great video and great tips!
Another fantastic and helpful video, thank you!
Very helpful, thank you!
I have returned to this video every time my airbrush does anything weird and it's helped me so much. Thank you!
Thank you so much for this guide! The drawings were specially helpful to really visualize and understand why something would fail, instead of just assuming something is wrong if you use it a certain way.
I just got my first airbrush and I will definitely keep these tips in mind. Thanks.
Very good tips. I learnt these the hard way.
I'm sirry but brilliant video, I cannot find people just giving this info straight anywhere, all videos full of bs, I just needed to explain the actual basic shit I run into, rather than all ghis technical bs, thanks for the help, sorted 2 airbrush issues I had ❤️
Great tips, thanks!
Very useful, thanks!
I spent 1 hour trying to figure out what the hell was wrong with my airbrush, saw many videos and nothing worked until I bumped into yours! I had no clue there was another part of the airbrush (tip) that could be cleaned! And yeah it was a mess and clogged. THANK YOU!!!!
A tip I've learned from Uncle Atom at Tabletop Minions: after cleanup and between sessions, I've started storing my airbrush in clean water when not in use, and since then I've never come back to a seized up needle. Just dry it off, blow it out, and it's ready to go.
I always do a full cleaning on my air brush after im done using it. And ive had all of the mentioned stuff happen to me. Great vid. Happy thanksgiving
Omg you helped me out with all the problems I was having without having to sit through a 60 minute video. You’re a saint 🙏
u helped me fix 2 problems I was having! thanks so much, I was about ready to just buy another airbrush! I knew it cud b fixed and u helped with this video! tks again
Great video. For cleaning the nozzle, you can also use disposable interdental brushes. I use size 1, and they're a perfect fit.
Best thing that happened to me is after 6 months of constant use the same compressor you have I had it packed up and I bought a sparmax 620 with a tank and what a difference! Not even a drop of water gets through it! I was forever getting water spray even with 2 water traps one at comp end and one airbrush end, i still use the same but the compressor makes all the difference honestly I was so hesitant thinking the single one was perfect for what I needed but it was more trouble than its worth! All this I learnt aswell with the single tank compressor soon as you move to the tanked one you won't have any of these problems unless using a sandy colour acrylic that's about the only issues you'll have! Hope you do take this on board it's made my model painting so much more fun knowi I'll not have these issues!
Thanks! This was v helpful. I have a model airbrush for daily foundation makeup and no where is a diagram of the parts of airbrush until your drawings! 👍🏼
Thank you for this!!!
This is an awesome video that succinctly details pretty much every lesson I've had to learn through trial and error. :D Super useful. Insta sub!
Thank you for making so many mistakes, and then passing on your wisdom. You're a Star ⭐. Take care and HAPPY EASTER........ BIG THUMBS UP 👍😎👍
Excellent. Many Thanks.
Thank you mate, that was super helpfull!!..👍
Excellent information
Great tips! 1000 thanks
Very helpful thank you 🤙🏽
Great video, thx heaps.
1 minute into the video and I know my problem! Legend! Thanks so much
Thanks for you giving me things for my brain.
Thanks for your vidéo , i have the problème of Always Have bubbles in the cup i understand now the reason , you save me 😃 thanks à lot .
Your vidéo is very simple,instructive and helpful really top
The video any beginner should see before start using an airbrush 😊👍🏻
Commenting is the most important
Thanks for this video. You have a new subscriber
I got the Iwata Eclipse for christmas. I will be coming back to this guide should I run into any issues!
I'm just getting started with airbrushing and I'm still kind of nervous bc it feels like quite a complicated and delicate machine. Your video however makes it less daunting! thank you for these stellar tips!
Havn't used my airbrush in a few months (stored correctly) and couldn't figure out why it went from working fine to crap. Spray fine then only flow air. Did a pull down and clean and problem persisted. Didn't realise I bent my needle. All fixed now. Thankyou
Thank you! I feel like I was going crazy all afternoon. That “little bend” or curvy needle image helped me define what a damaged needle looks like. I’m looking at my needle saying “yeah, that’s not bent”. Are they really this fragile? I’ll spray cleaner, but not tinned paint.
Great content! I was wondering where you’d get a bigpack of backup needles that was shown briefly in the video?
Great vid!
Good on stating every airbrush is different. People are always asking what PSI to spray at. The answer is generally whatever PSI is best for the airbrush you're using and the consistency of your paint. I own five air brushes, and they all use vastly different PSI for the same paint consistency. For newer people, you will get the 'feel' for it as you spray more. Practice on plastic spoons raising and lowering your PSI, add more thinner or less, etc.