Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position..plz
Exocad can read all kinds of files and a library does not need to include sdfa files. Everything is managed in the config xml file. The download should contain 2 folder. Copy the first one (Implant) into the implants folder under ..\DentalApp\libray\. The second folder (Implants) should go into the model creator folder under the Implants folder. Copy the entire library Folder not just the files in each folder in Exocad. Let me know if you have any questions or issues.
"Hi I've learned a lot from your videos, thank you! Is there a method in exocad for drawing subgingival margins on intraoral scanned files that allows for removing soft tissue on the buccal and lingual sides? I want to achieve a result similar to margin scraping on stone models, without using freeform modeling. Any advice?"
Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position.
There are no sdfa files but all STL. Copy the entire folder where the files are in, into the Exocad/implant folder. No subfolders!! After that restart the CAD module and you can chose it from the library menu
Thank you for your video, It's amazing. I tried, but in final step, when I need to subtract attachment always I get a failure message. Attachment can't be applyed. There is any secret here to succesfully apply cutter as attachment/subtract ? Thank you verymuch.
There are several reasons why there is a failure. Usually it has to do with the cutter itself. 1) Check if you exported only 1 mesh as the cutter. Double meshes cause errors. 2) the cutter has some errors in itself. import the cutter into Meshmixer and inspect for errors. make the cutter a solid. Export and try again. 3) if you didn't rotate the cutter in the subtraction mode it might fail. The Meshmixer version usually helps.
@@masterdentaltechnician1914 Thank you very very much, I will try all 3 dots and get back here to let you know. I repeat, your wok in this video is really amazing.
@@masterdentaltechnician1914 Hi. I tried several times, both ways(make solid in meshmixer and loading as model am do bottoms) and it worked nicely. Now, understanding your ideea, it make sense, is logical....now I'm asking myself why I didn't think this way before... Thank you very much.
@mariussava6126 you are welcome. I use that technique on all locator and Conus cases to have an internal TI-Bar. If you haven't seen that technique I made a video about it. Thanks for the comment!!
Hello,everything is perfect, until I get to use the cut bar attachment to make subtract, I don't have the setting allows any change, is it an additional function or should I set it somewhere, thank you
There could be several reasons. A) make a solid of the cutter in meshmixer, B) uncheck allow any changes when cutting it. C) there might be artifacts in the main design inside when you deleted the mua interfaces
@@masterdentaltechnician1914 , sorry my bad. during your outro in your video. you do separate the bridge from the bar, moving the bridge. How did you do that?
Something is not correct with the cutting tool( the bar). Either you didn't invert it or it's too short. Hard to tell without more information. You can send me the file and I will look at it.
Did you try to make a Solid of the cutter in Meshmixer? Sometimes the MUA are not cut out correctly and there are meshes inside the main mesh. When you load the cutter click "Rotate". When the cutter is loaded don't move it anymore.
Hello sir Thank you so much for this video but I'm having a trouble in the final step of applying the attachment and always getting an error message. what can I do to fix it?
Import the cutter into meshmixer and make a solid out of it. Then try again. This happens sometimes when something is wrong either with the cutter or the all on 4 mesh
Definitely you are a Master, I really appreciate all your tips and knowledge that you have. Hope someday be at least one third the professional you are. Thank you sir. 🤩🙌🏻👏🏻🫶🏻
Hi great contet! when i try to subtract with attachment a lot of time i get the message ''attachment operation failed: ensure that the attachment geometry correctly intersects the desired target reconstruction". Do you know what can i do to fix this? thanks in advance
I appreciate your efforts and videos in spreading knowledge, but what is exactly the purpose of background music? If you were invited to to teach at a conference, do you bring a radio with you and crank up the music to entertain your audience while they listen to you lecture? a lot of steps in your video and many people get easily distracted by unnecessary music
Thanks for sharing your thoughts! I understand where you're coming from. My intention with background music is to enhance the viewing experience, but I see how it can sometimes be distracting. Your feedback is valuable, and I'll certainly consider toning it down in future videos to keep the focus on the content. Appreciate your honest feedback!
hey doc i did all the steps but at the moment last moment im merging the bar to the final waxup , it doestnt let me attach it i tried this with galway and also with elfina and both give me this error ensure that the attachment geometry correctly intersects the desired im not sure what to do because is the same thing when im trying to sustract any restoration from the final model
Thank you for your feedback! I appreciate you watching the video. I'll definitely take that into consideration for future content and try to adjust the pace to make it more accessible. Feel free to let me know if there are any specific sections you'd like me to clarify or slow down. Your input helps me improve!
Library Download Link : www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&
Up
Wow what a legend, thank you for doing this!!
You are welcome
You are the man for figuring this out.
Seriously Exocad....how in the heck was anyone else supposed to figure this out???
Thank you 😀
Wonderful video. I am amazed that you figured this out.
Thank you.
thank you, this is a amazing video.
Thank you
Thank you very much
Is it possible to do the same thing in Dental system?
Thank you. I can experiment with it. Might be possible and Exoxad is probably easier.
Thank you so much for all education video. You are the best
👍 Thank you for the great comment
thank you for this sir
You are welcome
Thank's master 😊
Could you please send all the status stl files for training.
Please
Great work man! Congrats!
Thank you
Wow, very cool… it’s what I’m waiting for!!! With EXOCAD, great!!! Thanks Master 🙏👋🏼😄
You are welcome
Thanks so much for all your help!!!!!
Thank you for the great comment
thank you, this video is amazing
Thank you
Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position..plz
Exocad can read all kinds of files and a library does not need to include sdfa files. Everything is managed in the config xml file. The download should contain 2 folder. Copy the first one (Implant) into the implants folder under ..\DentalApp\libray\. The second folder (Implants) should go into the model creator folder under the Implants folder. Copy the entire library Folder not just the files in each folder in Exocad. Let me know if you have any questions or issues.
Thank you! Thought that would need to purchase b4d
do the library support all implants systems (like biotech-ETK-neodent....}
Up
Up
Up
up*
Up
Up
Thank you sir!!
You are welcome
very cool thank you. can save a lot of annoyances of having to use blender!
You are welcome!
Thanks Master 🙏 .. so we can do this on exocad only without blender?
"Hi I've learned a lot from your videos, thank you! Is there a method in exocad for drawing subgingival margins on intraoral scanned files that allows for removing soft tissue on the buccal and lingual sides? I want to achieve a result similar to margin scraping on stone models, without using freeform modeling. Any advice?"
Yes. The new version of 3.2 is allowing that.
Thank you for your efforts. Can this library be used in all cases of ibar?
Can you specify "All cases"?
@@masterdentaltechnician1914 I mean, are all kinds of implants used in the design of ibar of the multi unit type?
WOOOOWWWW THIS IS AMASIG
Thank you! Please share so others can enjoy it as well.
Thanks fo the amazing info provided. We downloaded the library but there is no sdfa files associated. Please let us know how to add to exocad your files and be able to load at detect implant position.
There are no sdfa files but all STL. Copy the entire folder where the files are in, into the Exocad/implant folder. No subfolders!! After that restart the CAD module and you can chose it from the library menu
Check out this quick video for adding libraries. www.patreon.com/posts/how-to-add-in-105651721?Link&
Great work.... thanks for this video 🙏
Thank you
What if we want to create a Finish line between the bar & the zirconia prosthesis with 0.5-1mm thickness ...... is it applicable ?
Change the bar profile. I used the standard bar profile in this example.
@@masterdentaltechnician1914
Thank you !
i've another question please , Does the steps can be applied with the complex Prosthesis ?
it can be used with rosen screws?
No. This Library does not feature Rozen Screws but I can see if I can update it.
@@masterdentaltechnician1914 did you happen to update the library to include the rosen screw M1.4 by any chance and the dess 19018 screw please
No. I would not use Rosen screws on Metal to metal. You risk of never getting them out.
@peterelfar3652 I would not recommend using Rosen screws on Metal to metal. You risk of never getting them out.
@peterelfar3652 the Dess 19.018 long screw you only need for PMMA. There is no need for it on metal bars
hi sir! You also have the vid where you design the upper structure/ bridge? thanks!
It's a regular All on 4 design. I have multiple videos about that
@@masterdentaltechnician1914 yeah! just finished watching one of them :P..... thank you very much!
@eu3145 you are welcome
Amazing thanks mann😊
Thank you!!
Great job thanks for your time
Thank you
Great work, regards with thanks for the effort!
Muito obrigado pelo vídeo, me ajudou muito!
You are welcome!
Amazinggg!!!🎉
Thank you!
Thank you for your video, It's amazing. I tried, but in final step, when I need to subtract attachment always I get a failure message. Attachment can't be applyed. There is any secret here to succesfully apply cutter as attachment/subtract ? Thank you verymuch.
There are several reasons why there is a failure. Usually it has to do with the cutter itself. 1) Check if you exported only 1 mesh as the cutter. Double meshes cause errors. 2) the cutter has some errors in itself. import the cutter into Meshmixer and inspect for errors. make the cutter a solid. Export and try again. 3) if you didn't rotate the cutter in the subtraction mode it might fail. The Meshmixer version usually helps.
@@masterdentaltechnician1914 Thank you very very much, I will try all 3 dots and get back here to let you know. I repeat, your wok in this video is really amazing.
@mariussava6126 if it's not working send me the file on Patreon and I will look at it.
@@masterdentaltechnician1914 Hi. I tried several times, both ways(make solid in meshmixer and loading as model am do bottoms) and it worked nicely. Now, understanding your ideea, it make sense, is logical....now I'm asking myself why I didn't think this way before... Thank you very much.
@mariussava6126 you are welcome. I use that technique on all locator and Conus cases to have an internal TI-Bar. If you haven't seen that technique I made a video about it. Thanks for the comment!!
Where can I find the libraries
On my Patreon page
Hello,everything is perfect, until I get to use the cut bar attachment to make subtract, I don't have the setting allows any change, is it an additional function or should I set it somewhere, thank you
There could be several reasons. A) make a solid of the cutter in meshmixer, B) uncheck allow any changes when cutting it. C) there might be artifacts in the main design inside when you deleted the mua interfaces
Don’t exist the setting in the dialog box,meby mai exocad is not the latest one
@609chetu what's your version
Rijeka 3.1
@@609chetu try to make the cutter a solid
Very nice technique and beautiful video! Congrats!🎉 But how do you move the finished design our from the bar? 😅
Thank you!! Can you please rephrase the question? I am having trouble understanding what you are asking.
@@masterdentaltechnician1914 , sorry my bad. during your outro in your video. you do separate the bridge from the bar, moving the bridge. How did you do that?
@@filipposfilippidis9626 that was done in my editing program. It's not an Exoxad feature.😁
@@masterdentaltechnician1914 oh okay. thanks anyway. Keep showing us your magic😁
Hello master do you remember Jeffrey Santiago?
Of course I remember Jeffrey from when I lived in CA. Great technician.
Donde consigo todas esas librerías 3:05 gracias
www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&
What is the software version?
3.2
Thank you sir i apreciate it😊
You are welcome
Can you give us the scan, stl file to learn how to do this at home?
All the scans and a light library are available for download on my Patreon page
Video molto interessante complimenti per la tua conoscenza. Non ho capito il passaggio al minuto 8,49 potresti aiutarmi? Grazie
Can you tell me how to solve the problem.
At the end, when I need to cut the bar , Attachment operation failed appears.
Thank you
Something is not correct with the cutting tool( the bar). Either you didn't invert it or it's too short. Hard to tell without more information. You can send me the file and I will look at it.
@@masterdentaltechnician1914 can you please send me your mail. Thank you
@@masterdentaltechnician1914 can you send me your mail. Thank you
Same thing for me but i followed every step…
I will make a short troubleshooting video to avoid these complications .
Lo he intentado con todas las actualizaciones y no sale siempre da fallo
Did you try to make a Solid of the cutter in Meshmixer? Sometimes the MUA are not cut out correctly and there are meshes inside the main mesh. When you load the cutter click "Rotate". When the cutter is loaded don't move it anymore.
@ gracias todo perfecto
very very good job congrats😁😁 👌👍
Thank you for being a channel supporter!
Hello sir
Thank you so much for this video but I'm having a trouble in the final step of applying the attachment and always getting an error message. what can I do to fix it?
Import the cutter into meshmixer and make a solid out of it. Then try again. This happens sometimes when something is wrong either with the cutter or the all on 4 mesh
I am a Dentist from Brazil and I would like you to do several Protocol projects for my Clinic. How can I talk to you?
You can email me at masterdentaltechnician@gmail.com
Definitely you are a Master, I really appreciate all your tips and knowledge that you have. Hope someday be at least one third the professional you are. Thank you sir. 🤩🙌🏻👏🏻🫶🏻
❤️🙏 Thank you for the great comment. Have you seen my latest video? th-cam.com/video/XyKIcMFtFSw/w-d-xo.html
Of course Sir ! I have the bell on !
Thank you for being a channel supporter!🙏
Hi great contet! when i try to subtract with attachment a lot of time i get the message ''attachment operation failed: ensure that the attachment geometry correctly intersects the desired target reconstruction". Do you know what can i do to fix this? thanks in advance
Import the cutter into Meshmixer and make a solid out of it. Then try again. This is the easiest way.
gracias pelao ! gracias!!!
please the link to download the MDT Liberery
www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&
Muchas gracias!!!
You are welcome
awesome!!
Thank you
En el último paso del recorte del atache siempre de error.
Porque puede ser
Import the cutter into Meshmixer and make it a solid. Then try again to cut it out of the bar in Exocad.
I appreciate your efforts and videos in spreading knowledge, but what is exactly the purpose of background music? If you were invited to to teach at a conference, do you bring a radio with you and crank up the music to entertain your audience while they listen to you lecture? a lot of steps in your video and many people get easily distracted by unnecessary music
Thanks for sharing your thoughts! I understand where you're coming from. My intention with background music is to enhance the viewing experience, but I see how it can sometimes be distracting. Your feedback is valuable, and I'll certainly consider toning it down in future videos to keep the focus on the content. Appreciate your honest feedback!
please i cant get Access to patreon to download the librairie
Thank you for the info. You need to be a Patreon member
(free or paid). I checked, and there are no other settings options for me to change it.
But there is one big problem…its not possible to set minimal thickness…
That is correct. That's why you have to bring in the cutter as a generic mesh before cutting and add the areas where it's minimal thickness.
I need to see this video a couple of times , great work !!! I was wondering how to do this on exocad with out going to B4D
Thank you! I am glad I could help.
👏👏👏
Thank you.
👏👏❤❤
Thank you!
u love this jop
Thank you!
es compatiblle con adin
hey doc i did all the steps but at the moment last moment im merging the bar to the final waxup , it doestnt let me attach it i tried this with galway and also with elfina and both give me this error
ensure that the attachment geometry correctly intersects the desired
im not sure what to do because is the same thing when im trying to sustract any restoration from the final model
nice. You should give B4D iBar a go. It makes this process extremely easier. Nice nonetheless
Thank you for the comment! I wanted to find a way to stay in Exoxad 😀👍
You are very fast. Can you slow down please 😅
Thank you for your feedback! I appreciate you watching the video. I'll definitely take that into consideration for future content and try to adjust the pace to make it more accessible. Feel free to let me know if there are any specific sections you'd like me to clarify or slow down. Your input helps me improve!
Thanks a lot for the video, now you don't have to buy B4D.. Please write a link to download the libraries
www.patreon.com/MasterDentalTechnician/shop/mdt-reverse-multi-unit-exocad-library-157006?Link&
i think B4D is a little better that this
I have no doubts. It's great to have options so you can choose what works best for you. Thanks for watching the video.
no bad, but with B4D we can doit more faster and better.
I have no doubts 🙏👍❤️