For those who have red light blinking , and the controller has absolute zero signal ( no left, right turn, no reverse, no forward) . Page 22 in the arrma manual booklet shows you how to fix the issue in just 2 steps.
I‘ve been searching the whole Internet and finaly geht your Video on youtube. I was frustrated and now everything works again. Ty so much, sry for Bad english and greetings Form germany ❤
I didn't fix mine the same as you did, mine was fixed by hitting a kart corral at about 60 miles an hour in a Costco parking lot, it fixed it. Well, it fixed the parts I could find of it
So here is a question, I have 8s kraton EXb RTR and when I run it hard the red blinking light comes on, is this related to this and or is this to indicate to let truck cool down. I always thought it would be another blinking light and color. Also I changed the LVC to setting 2 on the ESC from setting 5
We believe that model has a newer system and may behave differently. Most Arrma models will just shut off when they become overheated to prevent damage.
I ordered and Spektrum 8s ESC and every time I tried to use throttle it went back through the Lipo Tunes again over and over as I used the throttle. Still had steering though. Any ideas what might be wrong with the ESC? Spektrum was nice enough to send me a replacement as well as the 150amp esc since they realized I was putting it in my felony.
That is a pretty strange one. The only thing we can really think of is removing the batteries from the remote and setting all the trims back to 0, putting the batteries back in, and trying again.
My felony distance is not as long as its use to..and my breaks applies on its on when its a good distance from me .. will this possible help my problem??
Possibly, but your issue sounds more like a weak or damaged receiver. A good way to test that is if you have another Arrma RC you can swap their receivers and see if the problem continues.
Hi I need some help..like a idiot I pressed the bind button and turned my controller on..😢...and now it doesn't work..do I have to rebind the whole system again..
I have full control but when I go to 100% full throttle on, it cuts out and then the red light starts flashing. Do you have a solution for this? My throttle toggle is neutral
You may have to perform a rebind. This is where you teach the ESC where full throttle, neutral, and full reverse is. Just Google your vehicle and rebind procedure. For example if you had an Arrma Talion, just Google "Arrma Talion Rebind Procedure". Hope this helps!
I have the same exact car, same problem. I did everything in the video I got nothing. Batteries are full put new double A batteries in control still dose not work 🤦🤦
Did not work at all! For me. It’s a brand new 8s esc for my felony and the instructions typically say to have both steering and throttle at center. So I just have a piece of 💩. 🖕🏾Arrma, both my 6s and 8s esc’s are 💩 SHIT! I changed my steering servo and everything went reversed! Switched the transmitter and receiver only to lose power and I still had to reverse my settings again! I’m not sure 🤔 WTF! But buying this Arrma Felony has been a waste of $1,200 with the amount of accessories I’ve bought and I’ve only had it for 2 months after buying it brand new from a local hobby store.
Not everyone is aware of the user error; many enthusiasts accidently bump their controller and don't realize, they also don't realize this could interfere with the binding procedures. This video just gives an option to fix the issue if your issue was caused by an unintentional user error.
@@purplerc I can respect that but, this shouldn’t be labelled as a fix since nothing is broken. Mislabelling something makes it a nightmare to find the actual fix to the real problem. I’ve just given up all together and returning my ESC, lol
For those who have red light blinking , and the controller has absolute zero signal ( no left, right turn, no reverse, no forward) . Page 22 in the arrma manual booklet shows you how to fix the issue in just 2 steps.
Thank you so much this helped me a ton with my brand new vendetta
Wow
I have this issue with my Losi LMT10. Any ideas?
@@TriggerFingerRCsame did you figure it out
@@obviously1373 yes, but it's been a while. No idea what i did lol
OMG, you are a life saver. I tried your method, and it fixed my truck thanks alot.
I‘ve been searching the whole Internet and finaly geht your Video on youtube. I was frustrated and now everything works again.
Ty so much, sry for Bad english and greetings Form germany ❤
thank you so much.steering worked on my big rock,yet nothing else.adjusted the throttle trim & BAM,it worked again
It worked on my big rock as well. I had no throttle and no steering. Adjusted steering trim to the dot, throttle was at the dot. Thank you
Had a completely vegetable felony and this worked perfectly! Thanks!
Glad it worked for ya!
Totally worked!!!! Thank you so much Purple RC!!!🙏🏻🙏🏻🙏🏻🙏🏻
Thank u bro, this videos instructions worked for my 4s laser nut. Good video bro 😎
Had steering no throttle and red blinking light when powered on. This worked for me. Ty ty ty
Going to try this now on my infraction 6s it’s always giving me problems recognizing the controller…
Awesome, worked for dumbo RC transmitter/receiver. Thanks👍🏼
Thanks it worked and now happy
I didn't fix mine the same as you did, mine was fixed by hitting a kart corral at about 60 miles an hour in a Costco parking lot, it fixed it. Well, it fixed the parts I could find of it
Probably not the recommended method but if it works, it works!
You are the best bro
So here is a question, I have 8s kraton EXb RTR and when I run it hard the red blinking light comes on, is this related to this and or is this to indicate to let truck cool down. I always thought it would be another blinking light and color. Also I changed the LVC to setting 2 on the ESC from setting 5
We believe that model has a newer system and may behave differently. Most Arrma models will just shut off when they become overheated to prevent damage.
I have the outcasts Arma 8s. When I turn the car on.
The light is blinking red but I got no throttle or no steering
Thanks for ur video worked ok mine to. It's a felony 6s I was dreading calling arrma. Thanks
you are a god sent
I ordered and Spektrum 8s ESC and every time I tried to use throttle it went back through the Lipo Tunes again over and over as I used the throttle. Still had steering though. Any ideas what might be wrong with the ESC? Spektrum was nice enough to send me a replacement as well as the 150amp esc since they realized I was putting it in my felony.
That is a pretty strange one. The only thing we can really think of is removing the batteries from the remote and setting all the trims back to 0, putting the batteries back in, and trying again.
My felony distance is not as long as its use to..and my breaks applies on its on when its a good distance from me .. will this possible help my problem??
Possibly, but your issue sounds more like a weak or damaged receiver. A good way to test that is if you have another Arrma RC you can swap their receivers and see if the problem continues.
That's interesting 🤔 I just tried 3 working esc in the same truck and they all had red light but one of my trims was all the way left
The trim settings being wrong can really throw off the whole system!
Thank you bro big help I have a typhon 6s worked perfect
He is a legend
Great video
I get this issue but after a couple minutes of perfect signal, could this be the same issue?
No matter what I do it won't do anything.
Hi I need some help..like a idiot I pressed the bind button and turned my controller on..😢...and now it doesn't work..do I have to rebind the whole system again..
Yes but don’t worry it doesn’t take long
Thanks Dude!
It's works thank you 😊
I have full control but when I go to 100% full throttle on, it cuts out and then the red light starts flashing. Do you have a solution for this? My throttle toggle is neutral
You may have to perform a rebind. This is where you teach the ESC where full throttle, neutral, and full reverse is. Just Google your vehicle and rebind procedure. For example if you had an Arrma Talion, just Google "Arrma Talion Rebind Procedure". Hope this helps!
Thank you.
I have the same exact car, same problem. I did everything in the video I got nothing. Batteries are full put new double A batteries in control still dose not work 🤦🤦
Try your steering servo guys if this don’t work
Turn off, bind again, in one of my cars the radio reverse eletronic malfuction
i need some help i turn on my armma typhon an i hit the throttle an it goes in reverce an when i hit the brake it goes forward can someone help me out
There's a switch for that on your controller.
If it goes faster in reverse than forward, you need to switch two of your motor cables.
Neither of those I have no gas inverse and no steering
From another comment: "Page 22 in the arrma manual booklet shows you how to fix the issue in just 2 steps."
I am going to my hobby store and show this video because my turn will turn right but it will go very slow for left turn
Thanks works
This didnt seem to work
Mines not working
Did not work at all! For me. It’s a brand new 8s esc for my felony and the instructions typically say to have both steering and throttle at center. So I just have a piece of 💩. 🖕🏾Arrma, both my 6s and 8s esc’s are 💩 SHIT! I changed my steering servo and everything went reversed! Switched the transmitter and receiver only to lose power and I still had to reverse my settings again! I’m not sure 🤔 WTF! But buying this Arrma Felony has been a waste of $1,200 with the amount of accessories I’ve bought and I’ve only had it for 2 months after buying it brand new from a local hobby store.
NOOOOOONNN!!!!!
getting tired of all these "fix" videos that are actually just user errors...
Not everyone is aware of the user error; many enthusiasts accidently bump their controller and don't realize, they also don't realize this could interfere with the binding procedures. This video just gives an option to fix the issue if your issue was caused by an unintentional user error.
@@purplerc I can respect that but, this shouldn’t be labelled as a fix since nothing is broken. Mislabelling something makes it a nightmare to find the actual fix to the real problem. I’ve just given up all together and returning my ESC, lol
Yea….because you knew all information about this shit right out the gate 😏
@@str8toff again, this is not a “fix”… this is also not an arrma issue, they all do it.
Hi i dont have any response for the truck do you have any other hacks