It's easy to see you are a true craftsman, oh boy I appreciate just watching you create such practical masterpieces for use in the workshop, I also love Scott Joplin ragtime,many thanks. Jim.
Seven seconds of video and I LOVE IT. Thanks for not using a "chumpa chumpa" music as my friend says in Spain. I gong to carry on watch in it for my delight.
Very nice. I got a couple ideas from your design approach. Nice use of the laminate surface for the wear surface of the platen too. I don't agree with the other guys' complaining about the CNC, it was the best tool available but I can see you have the skills to have used a hole saw, circle cutter, router etc. The real value is being able to watch someone else work out the same problem you're working on. thanks for a great video :)
When I went to a DIY shop and wanted to make the same thing after watching this video, timber was more expensive in Japan. Chinese finished products sold for $ 45 ...
I used to like Joplin's "The Entertainer". However, now when I hear that song, I don't know why, but I coil up in the fetal position, on the cold, hard floor, and enter a deep catatonic state! ... Otherwise, very interesting and informative build! NOTE: There are very few TH-cam videos which would not benefit from additional copious editing! :-)
Good work. But i'm wondering if you are working on the plan and/or template before starting this project? cause i see there is a lot of part that need to be engaged together precisely. Good video again. Thanks for making such.
OK, hmm, not sure we are talking about the same angle? I mean the angle between the plane the sandpapir runs on and the plane/table the sanded part rest on. Is it a sure thing (90°) due the parts just being precisely cut and then assemled. Or is there aligment going on off video during assembly?
pepelacho gonzalez I don't think he said he made it at YOUR home! If I make pancakes at home, and I use a tool you don't have, does that mean they're not homemade?
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Как хорошо иметь оборудованную мастерскую,завидую белой завистью, С дачи выперли перемещаются в гараж.
It's easy to see you are a true craftsman, oh boy I appreciate just watching you create such practical masterpieces for use in the workshop, I also love Scott Joplin ragtime,many thanks. Jim.
Seven seconds of video and I LOVE IT. Thanks for not using a "chumpa chumpa" music as my friend says in Spain. I gong to carry on watch in it for my delight.
Very nice. I got a couple ideas from your design approach. Nice use of the laminate surface for the wear surface of the platen too. I don't agree with the other guys' complaining about the CNC, it was the best tool available but I can see you have the skills to have used a hole saw, circle cutter, router etc. The real value is being able to watch someone else work out the same problem you're working on. thanks for a great video :)
Thank you
Giselle Marie
thanks bro,for good qualities,for easy,for faster you use enough Technics and who knows enough Technics he never feels tiered to work.
Начало на 5+. А результат просто супер. Себе такой же делать буду.
Buenas noches amigo gracias por compartir tan genial creación me preguntó si existe un plano y si está dispuesto a compartir gracias
Gracias. Peço desculpa, mas não tenho planos deste projecto. Obrigado
Excellent build! Very Nice and great video too!
muy sencillo y practico, la verdad si me gusto y lo voy hacer, gracias por demostrarlo y compartirlo.
Gracias
Very Good......your job is the best......I like
Thank you
Hi very good job and thanks for sharing...do you have an idea of the strengh of the spring to keep pressure on the band?
When I went to a DIY shop and wanted to make the same thing after watching this video, timber was more expensive in Japan.
Chinese finished products sold for $ 45 ...
I used to like Joplin's "The Entertainer". However, now when I hear that song, I don't know why, but I coil up in the fetal position, on the cold, hard floor, and enter a deep catatonic state! ... Otherwise, very interesting and informative build!
NOTE: There are very few TH-cam videos which would not benefit from additional copious editing! :-)
Hi there from Portugal(Coimbra)
Nothing like make your own tools :D
Obrigado(Thanks)
+Blog das Madeiras Obrigado
:D
Tambem gostei imenso desta. :) hei-de fazer uma para mim :)
Хорошо когда есть все инструменты. Наверное автор годами закупал и совершенствовал их, или по наследству достались.
Excelente trabajo muy buena idea
me encanta ver los trabajos que hacen,pero deberian poner planos con las medidas,por si los entusiastas quesieramos hacerlo,gracias.
bonjoour tres bien fait. je voudrais savoir la pression du ressort et la longueur svp merci.bonjour
Very nice build man!!
Thank you
Beautiful work, very good !! I would like the measures of the pieces, you can have them ?? I live in Italy, thanks !!
Very nice build!
Gracias
Congratulations!!!. Really a great job. I would build myself. Do you have any plans ?. If necessary, I could have them ?.
Good work. But i'm wondering if you are working on the plan and/or template before starting this project? cause i see there is a lot of part that need to be engaged together precisely.
Good video again. Thanks for making such.
Thank you. I have not templates. I do all the work by memory. I only do some small sketches on paper.
parabéns ! trabalho de mestre ! 10
Subscribing for part two!
Great video
Muy linda musica. Me gustaria saber como se llama ese tema y su autor.
Muy bien el video . Hagan el video al español seria espectacular
Hola, Me Parece genial, me gustaria intentarlo, si puedes ayudame con las medidas
Muito bom seu vídeo vc é um bom profissional
Obrigado.
Nice build :-)
One question. How do yuo make sure that the angle between the table and sander is 90 degree and stays that way when you build it?
because I screw the structure that supports the beltsander to the table and confirmed that the angle was 90 °
OK, hmm, not sure we are talking about the same angle?
I mean the angle between the plane the sandpapir runs on and the plane/table the sanded part rest on.
Is it a sure thing (90°) due the parts just being precisely cut and then assemled.
Or is there aligment going on off video during assembly?
Great video ! Thank you. Where can I download the plans ?
Покажите механизм натяжки ленты
Parabéns !
Ótimo projeto !
how does the tension work?
5:29 It looks like the under carriage of a flintstone car.
Quais materiais são usados pra fazer uma dessa ?
nice project
ToRe ijjjno
Valeu amigo., obrigado por responder
What type of motor would be good for this type of sander, half CV or a CV, thank you?
Um cavalo. Meio cavalo é muito fraco para lixar com uma lixa deste tamanho.
thank you so much
thank you.. nice
Very good
Any place you recommend to buy bearings? I need some for some projects
Hi, Really Nice Project!
Can i ask you where did you find that belt?
Thanks ;D
I had it made to measure
Oh! Ok, Thanks :))
great job....
What do I need to do to get the plans for this project.
Estou a trabalhar nos planos de forma a melhorá-los. Conto disponibilizá-los em breve. Mas para já não é possível. Obrigado
can you duild one in top and there at botam
muy buen vídeo. excelente...
Espectacular
"Homemade" ... if you happen to live in a complete professional carpenter's workshop, with all the expensive machines you could dream of, that is.
Excellent video, links deleted for download the planes someone have the planes please send me, Thanks
Gostei deste modelo que o senor fes
very nice ...
Home made ?
Difficult to say home made when employing CNC equipment.
Those pieces could easily be made using a drill press or even a regular drill with a steady hand.
this design sanding belt move away from side to side
"background music" too loud.
nice build! :D
You have the ability and the technology in your hands to turn the volume down... There was no dialogue or narrating going on... LoL
I dont think you can call it "homemade" if you're using a CNC machine; most of us dont have that at home
exactely, how to make a sander starting with a piece of tree branch? use your 3000 USD CNC... what's the point?
It's not like you actually need a CNC machine to do that though.
אריאל עובד Mole diamantate
Alternately, you can do it with router.
Don't cry kids, is just one hole
muito bom seus vídeo!
а если подшипники смазывать надо будет
Наверное уже пора.
gostei muito da tualixadeira 🙏🙏🙏🙏🙏👁👁✌✌👏👏✌
BRAVO
What is the name of this song?
“Homemade” ahh yes, I also have a full workshop with Cnc router in my garage...
Cual es el nombre de la musica de fondo?
1 min: Oh, nice music.
5 min: Ok, i hate this music now.
Hi I am Carpenter
Merci !
MARAVILHA THANKS
home made? i dont have a 1:38 tool at home :(
pepelacho gonzalez I don't think he said he made it at YOUR home! If I make pancakes at home, and I use a tool you don't have, does that mean they're not homemade?
Looks for a way to save a dollar.....now all I have to do is pull a CNC ROUTER out of my ass.
Mantaaaaaaap
Can I view movies on your channel?
مصطفى ابرهيم no
good
Says it's homemade, then pulls out a CNC machine.
can you give us plans
Sorry, i do not have plans. I made it by memory.
Music Is very off putting
👍👍👍👍👌
👍👏😁
5:08 LOL
Muy complejo trabajo para tan poca utilidad
Como sabes que tem pouca utilidade?
From The Wood perdón es extraordinario el trabajo
equipo muy sofisticado es el mejor video que he visto
Yeah mate, make a home made sander using a shit ton of expensive tools... Just buy the sander ffs.
E aí funcionou?
How to build a 20$ tool with..... 2000$ tools ! Thank you mister "DIY" !
У вас есть мастерская и станков на 25 000 баксов???
Сэкономьте 200 баксов и слепите гриндер из говна и палок!!!! ))))
só mostra um cara fezendo um lichadeira, só isso, 👎 não tá ensinando nada.
حسن
Тошнит от музыки
I feel like it's point pointless to make this if you're using power tools and a CNC... come on get over yourself
what
..
Working👍 Sound..! 🤮👎
too much special tool
Annas Baba g ss
good
too much special tool
good
good
good