I didn't believe it myself! Brilliant idea in 5 minutes!
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2021
- As soon as I made this cutter for myself, I immediately received orders for the same devices. It turned out to be both easy to make and an ingenious device that makes work easier and helps to cope with cutting the foam.
Friends, my name is Renat! I am the author of the CraftMaster channel.
On this channel, I show everything that I did with my own hands.
Creative ideas, helpful tips and great homemade products!
We transform ordinary things into unique ones! Subscribe, it will be interesting! #diy #craftsmaster #homemade #craft #northerncraftsman #tools #ideas #creative #home-made #self-made #craftmaster #ofhomemanufacture #amazing #home-grown #handicraft #homediy #banausic #craftsman
![[TH] VCT Masters Shanghai Swiss Stage DAY 5 // FPX vs TH | FUT vs LEV](http://i.ytimg.com/vi/r61uDZTmu44/mqdefault.jpg)
I wish that all you people putting videos up like this would show the finished tool in use first and then show how to make it. Then I wouldn't have to forward to the end to see if I am interested enough to see how it is made.
Pay attention to the movies. They never start with the ending!
@@masterofcrafts a movie made for entertainment is a completely different genre'. It really would be much more useful with a preview of its use at the opening. It is however ingenious and would have saved me a lot of time over the years I was contracting. And a lot of vacuuming! Lol
I think I will ignore clips that don't reveal what they are about in future. This is a disingenuous clickbait trick. If you start at the end to see what its about they still get the view!
@@masterofcrafts This is YT bro ..... not a movie ......instruction video would be the correct term. I agree with the previous poster .....lets see the final product at the beginning.
Gary Barchas How to shoot a video is the right of the video creator.
Молодец, респект и уважение!!!👍👍👍👍👍
Удивляюсь, как я раньше жил без этого!)))
А что он делает ???
Отличная ИДЕЯ !!!!! СУПЕР Не убегайте из нашей страны , всё наладится
Когда руки умелые,любое дело спорится! А с умной головой и с инструментом и подавно!
I like the way Craftmaster uses the compound miter saw, his clamping method no risk.
You don't think it would be even safer to use the saw as it was intended, thereby eliminating the cuts with the boards not up against the fence? Those are not safe cuts. If for any reason the blade failed to cut the wood, those clamps would fail. They can't match the power of the motor. the wood would move, possibly being thrown across the shop, and/or the cutting head would surge in the direction of the operator. Safely cutting angles is the whole purpose of the turning cutter head and table.
Great Idea Simple but very useful and wish you a nice Sunday Lg. Loes !!!🤗🤗🤗❤❤
Мне все понравилось и идея , и конечно же классный инструмент. Спасибо.
Умная голова, золотые руки, терпение и непринебрежение к мелочам!!!
И нам терпение не помешает в долгом просмртре. Никак не пять минут.
Спасибо.... Вроде бы инженер... Даже механик... Но почему то чувствую себя полным...... Идея на миллион! Удачи!
америку открыл. это колёвки.есть фигурнне есть просто поз брать ещё деды и прадеды ими пользовались и нам завещали
Когда постоянно и долго работаешь с чем-то, идеи приходят сами собой.
That was really nice of this carpenter to mute the Saw noise, thank you.
Excelente herramienta y práctica para muchos usos en trabajos con espuma o tecnopor. Un cordial saludo desde Bogotá Colombia 🙏🙏🙏
Finally someone who cuts out the sound of power tools. My ears thank you.
If tool noise bothers you....then carpentry is not for you....maybe your more of an office kinda guy.
@@danielreyes1084 no, I'm autistic and have auditory hypersensitivity.
I agree about the sound. I like woodworking - the noise adds nothing for recreational viewing. First time I've seen this type of video. Like button gently pressed.
Repent to Jesus Christ!
“he refreshes my soul. He guides me along the right paths for his name’s sake.”
Psalms 23:3 NIV
Un
Приспособление простое, но выполнено с любовью, пусть даже и на "один раз". Не давайте его ленивому соседу.
Congratulations commander! Thank you! 👋👋👋👋👋👋👋👋👋👋
Как красиво работает ! Благодарю!Всех вам благ!
Обожаю мужиков, которые дружат с мозгами и руками!!!
а ОНИ тебя ? )))
Молодец мужик!!!
МОЛОДЕЦ ДРУГ !! ХОРОШАЯ ИДЕЯ
You are the king of angle cuts! 👍
Когда всё на мази можно , работать в одно удовольствие !👍♥️👋👋👋🍒🇷🇺🤚
В ваших руках всё гениальное просто, большое спасибо, прекрасная идея и большая практическая польза, браво!!!
гениально. что за 5 минут, а видео длится 8, ещё и с ускорением.....
Dmit rii -----. НАВЕРНЯКА ПРОЕБАЛСЯ ЦЕЛЫЙ ДЕНЬ А ТО И БОЛЬШЕ !!!!!
МЕНЯ ЗЛИТ ЭТА ХУЙНЯ ---. НЕСООТВЕТСТВИЕ. НАЗВАНИЯ РОЛИКА - СОДЕРЖИМОМУ !!!!,,,,, 👺👺👺
Вы каждый день режете пенопласт ?😉 Какая польза ?
Для мужчин с руками польза большая, можно утеплить дом, дачу, скотный двор,а вам, наверно, просто не нужно
Во всем ищете способ мазнуть черной краской-это зависть. А мастеру браво.
Wow products !! A practical and very cost-effective idea. Thanks for sharing your experience and idea. We are waiting for your next videos.
That is a brillant idea!very cool.
Awesome informational educational video experience Y'alls God Bless Y'alls 🙌 ❤ 🙏
Да , часто столкнулись такие проблемами.
РЕСПЕКТ👍👍👍👍👍👍
Когда голова работает так, как надо! МО-ЛО-ДЕЦ!
А я до сих пор не могу поверить. У меня тоже начали заказывать только такие резаки. Уже на машину накопил, в ней тоже резак поставлю, скоро самолёт куплю. И в самолёте резак поставлю.
МОЛОТОК!
I just want to say I appreciate your showing all the clamping on the miter saw. Helps someone like me who doesn't really know what they're doing.
How about learning from someone who actually knows how to use one! Not this guy. The saw is designed to rotate for accurate angle (miter) cuts, but instead of using it that way, he wastes all kinds of time measuring to cut simple, 45° angles! Wtf. On top of that, I found myself cringing at the untidy worksite, not because it looks horrible (even tho it does), but because it’s the kind of work site someone eventually gets hurt on. Loose boards lying around to trip over, never mind the potential that some of those have embedded nails sticking out that someone is gonna step on and end up with a nasty hole in his/ her foot. I know, I’ve been in the construction business for 40 years and recognize this half- arsed behavior for what it is- either complete ignorance, or willful stupidity that results in injury or even worse, depending on how badly it gets out of control. Do yourself a favor and find a different channel to “learn” from, if that’s your goal.
@@Tuncle54 I've always looked at the quality of worksite to judge quality of work.
why did he not just set the angle on the saw , a lot saver than that dodgy clamping not the thing to be showing on youtub
If you want to learn how to use a miter saw this guy is the WORST person you can learn from !!
I guess d hack was made to cut cardboards...only sound of workmanship...no human voice...very daring... much APPRECIATED 👏
Ingenious solution and excellent execution.
That’s a great idea for building fiberglass rectangular tubes. There was once a product called “duct board” which was fiberglass ductwork & some of the fabricating tools were quite expensive for working with it. Also, the duct board had lots of loose fibers that would get into the air streams of buildings & homes because it wasn’t lined with any sort of a coating. The fiberglass panels would do the same thing, have way better insulating qualities too!
Repent to Jesus Christ !
“he refreshes my soul. He guides me along the right paths for his name’s sake.”
Psalms 23:3 NIV
J
эх
٣ثثثث٣٣ث
Qqqqq
Ok
This is a very good TV show and we love it !
2 cuts and boom there you go! Always a pleasure to see genious at work :)
You are a master craftsman.
Круто, оригинально,отличная идея
Go to any HVAC contractor store. They have had these tools for years. Used for assembling fiber duct board ( commonly called fuzz duct in the vernacular). A set of three, I believe ( haven’t used mine for a while)…covers all the bases. But, it’s nice he got over a million views.
Buang
Leave a gap between the sheets of insulation and fill the gap with spray foam after installation. Faster and much more air tight.
Magnifique... l'imagination de l'être humain dans les domaines apportant le BIEN est respectable et doit-être saluée.... BRAVO.
Muito show meu amigo 👍👍 parabéns 👏👏.🇧🇷🇧🇷🇧🇷
Obrigado!
Parabéns pelo seu trabalho já deixei o meu like 🇧🇷👍🤝👊👏💯
"but Septimus, what does it DO?"
I wish he'd have shown us that at the beginning.
Great idea!
Thanks for posting!
Finally a YT video of a "brilliant idea" that IS A BRILLIANT IDEA!
Muy ingenioso. Gracias
Молодцом!!!!
Amazing👍
Thanks for this video.
I will be working with polyiso insulation soon. I will have to make a lot of cuts. I think I’ll make a simplified version of this. Most of my cuts will be straight cut and a utility knife blade doesn’t cut 2 inch foam in a single, clean cut.
Этот дизайн изобретательный и очень творческий. Спасибо, что показал это миру. 😎👍🏼
Voila une idée géneale bravo Maestro
Merci!
Целая столярная мастерская, с кучей станков, это не у каждого есть, !
Great idea! Nicely done.
Muito Obrigado pela informacão
a 🔧 ferramenta e muito precisa 👏👏👏👍VALEU
Keren sekali😇👍
Saya suka video kerajinan tangan😇
Фаааак... Офигенная штука. Ну и ума у того, кто придумал.
Given the choice, I rather see the finished product first. But it never stops me from watching these types of videos. Realistically speaking, there's a 99.999% chance I'll never make the product. I mostly watch them for other reasons, such as learning new techniques or creative ways of using tools. Very few people have every tool they need. It's great to learn work-around's when your tool selection is limited.
Skip to the end first. Just a swipe of the thumb away from finding out what they made
@@dalestewart264 My thought exactly. It took so much time and effort out of my day. Probably less than typing this sarcastic reply.
Молодец !
Для того чтобы сотворить такую херотень, нужно столько инструментов купить и уметь ими владеть.Одобряю.
Спасибо! Но чтобы сделать эту самоделку не обязательно иметь такие станки, можно и всё сделать простым ручным инструментом.
@Мастер. Вы заметили,что отзывов ,написанных по-русски ,намного меньше,чем ин.яз?Что бы это значило?
Excellent!
Com este maquinário fantástico, e muito simples executar qualquer trabalho..
Если вы про его пилу, то можно и без нее обойтись, просто уйдет чуть больше времени
SACO...
Ridiculously clever..thanks!!
Repent to Jesus Christ!
“he refreshes my soul. He guides me along the right paths for his name’s sake.”
Psalms 23:3 NIV
H
@@jesusislord6545 no such thing, god was invented my man
а идея хорошая я вручную мучился))
진짜 똑똑한 사람이다. 창의력이 뛰어나네요
Mis respetos para esas personas q hacen esos inventos y los comparten 👋👋👋👋👋
Why not use the miter saw the way it was intended to be used? You can rotate the saw base to any angle, instead of holding the wood at a weird position and having to clamp it down.
I was wondering the exact same
yep
I have the same saw and never used that jig lol
@@DeanUrevig oh Dean lol
My thought would be bc of the size of the cuts/wood, and possibility of it kicking out?!? It's safer to clamp down and avoid skipping. (honestly no clue, I just know it happened to me before with my saw). I also think precision is probably more exact by hand than using the bevel... and he was precise!
Куда не глянешь ... каждый мнит себя гением ...
Друган тоже мастерит. Посмотрел, подсказал, купи ещё два шурупавёрта. Биты какие надо поставил и время не теряй, меняя биты. У меня так. А то всё некогда, время дорого. Также дрели дополнил. Теперь гораздо быстрее делает. Увиделись, орёт довольный, что раньше молчал? Пнёшь, тогда понимаете. Всего доброго.
wow 5 minutes can create something very useful
👏👏👏👏
@@youtukang r
Be positive believe yourself.. Look the outcome is amazing. Good job
I enjoy his videos.
You are a clever man & a fast worker. Very cool!
Why not use the fence and miter saw function and cut angles easily and safely?
Brilliant idea, well done!
Excellent clever 😁😁👍🏿👍🏿👍🏿👍🏿🤗🤗
Nice little jig you made to solve a jointing problem. Thumbs Up!
Very clever! Simple and cheap is always the best!
Thanks!
No, no it's not.
I have learned to watch the last 30 seconds of these videos to see if I want to see the "mystery build" or not.
You can say that again. Most of them are garbage.
that's a really good tip!
And, did you watch the mystery build? Just wondering
@@RikHendriksDutchCo Nope. I can buy a matte cutter for less than what an hour of my time costs, so this build is never going to be worth doing.
Самое основное в конце.
Auch wenn ich das nicht brauchen kann, gibt es einen Daumen hoch
Very clever. Looks like it works great.
Хорошо когда под рукой есть такие инструменты и приспособления! В ручную был бы очень долгий процесс
I watch many videos of methods and jigs for jobs I'll never take on. They are ususally fascinating - the ingenuity and skills shown keep me entertained for hours. This one was just the same, brilliant. Just one question - why risk losing bits of flesh by using a knife blade as a glue spreader?
Самоделкин👍👍👍
Brilliant!
For those complaining that they want to see the finished product first, look at the little icon. It's right there. Nice video.
Still a poor video format.
I don't see any damn little icon.
Klasse!!
Con madre. Voy a tener esas herramientas sofisticadas y a la medida para hacer el invento ese......y ya lo hice.....bravo. es facil....
Хороший станок!!! Мне бы такой!!!
Ты должен придумать это первым!
Одно не могу понять-накуя показывать,как ты каждый раз зажимаешь заготовку для отреза угла?
Полностью не раскрыта тема покупки торцевой пилы AEG, клея, шуруповерта и т.д.
Уж раз 100 говорилось, КРАТКОСТЬ - СЕСТРА ТАЛАНТА.
Из 8 минут можно сделать 2...
Хорошо хоть идиотской музыки типа бумцаца нет...
ДА САМОЕ ГЛАВНОЕ ЗАБЫЛ....
В ЛЮБОМ СТРОЙ МАГАЗЕ, ПРОДАЕТСЯ ТАКАЯ ШТУКА - КРОМКОРЕЗ НАЗЫВАЕТСЯ.
Что то, качество контента на ТвояТруба, становиться на уровне детского сада.
Pretty cool invention!!!
Amazing!!
Молодец!!! Есть мозги, жить будет!!!
Мастер виртуоз благодарю
I love a man that is good with his hands.
But a clever jig all in all. Good job.
А пафоса в названии, будто тут деревообработку заново изобрели...
Fantastic device you constructed good show
Awesome lil yet, highly effective little tool!
Mir gefallt Dein Arbeiten schön daß Du dein Werkstück festmachst beim Sägen