Airwick Freshmatic permanent red light fix/Freshmatic z KAŻDYM wkładem FIX
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- W filmie przedstawiono jak przerobić na stałe Airwick Freshmatic aby działał z każdym wkładem bez oryginalnej końcówki.
W filmie widać sensor od którego należy odciąć 4 przewody i połączyć widoczną na filmie parę przewodów (w filmie sensor został odcięty wcześniej
It works. No need to open the mechanism. Just from the side separate the 4 wires then connect the red to the green. Thank you
I had an old unit laying down in my office (with the red light blinking) and went to the market to get some Glade cans. Of course the b!tch didn’t work as intended using these, so I opened the device, unscrew the mechanism, removed the sensor, and tangle both red and green wires (leave the other 2 alone).
Although the led light doesn’t flash anymore, so far is working fine without issues.
Thanks man and God bless you!
Muy buen tutoríal amigo. Hice lo indicado de unir el rojo con el verde, funcionó pero solo una vez y no vuelve a disparar. Esta definitivamente dañado , muchas y felicidades
Thank you broth ! You save my life 😃
Cihazımla aynı marka oda kokusu almama rağmen çalışmıyordu bu yöntemi denedim be cidden çok güzel oldu artık çalışıyor çok teşekkür ederim.🇹🇷
Thank you very much
I solved the problem
Thank you. With your help I have solved the problem. You are an clever help.
Thanx its works👍👍👍
Świetnie działa...dziękuje
Brawo Ten Pan...... Działa 100%
Excellent it worked for me
Thanks... 👍
No, polak potrafi. TO jest rozwiązanie a nie jakieś paski czarno białe karzą drukować. Emiter z kolektorem razem skręciłeś?
Vim do futuro (2020) para dizer que ainda dá certo!
Bom trabalho!
tanks to in turkey..
Funciono perfecto. Gracias
Es solo el cable rojo y verde.. se unen.. los otros negro y amarillo se dejan abiertos libres ??
Thank you
Thanks man 👍
Thanks
Not sure what's happened after I watched this video, however, for some reason I've been getting nightmares and my babe fed up and wants to stay with her mom!!!😕
Děkuji Kamile 😂
Mám ještě starý model bez senzoru. Chápu to dobře že ten senzor blbne a přestane spínat?
@@rzboril ano mě přestal prostě funkovat pomohlo jen toto
thanks bro it works
No problem:)
Not worked for me.I joint red and green wire, its stop red light flashing but still not working.
Thank you. It works. I didnt need to open the mechanism. Just from the side i separated the 4 wires from each other then i connected the red an green. Thank you
Thanks it work,,👍
Grazie
Watch this video, you will find a much easier way
OMG! This seems like rocket science to me. I doubt i can repair my dispenser. Am doomed..of Uganda.
Kamil bey bu freshmatik makineyi adaptör ile nasıl çalıştırırız...Bence bi video çek derim ben
Je peux l'acheter où et à qu'elle prix
Anyone pls tell me what type of IC is using inside this..there is an eight pin micro controler used to blink LED
Рлпешапдйцб5цоешувсошеол7епмооашголдуатдго
Да, один пшик и всё. Где решение проблемы?
Ok is real
Ultracomplicado
O homem é mudo?
thi,ks thinks thinks
А можно просто фальгой обмотать и всё