Airgun - Install Altaros regulator to Daystate Wolverine B
ฝัง
- เผยแพร่เมื่อ 29 ต.ค. 2024
- The video has an educational character - intended, for example, for sports shooters, biathletes, including teenagers and adolescents.
For more information about us, our work and products visit www.altaros.cz/en
TH-cam Audio Library :
Echinoderm Regeneration by Jingle Punks from TH-cam Audio Library goo.gl/YmnOAx Pentagram by Audionautix (audionautix.com)
I have one of these bottle regulators on a Hatsan Bully25 cal
Very good quality and fine consistancy.
Able to set it to 170bar.
But for pellets is 150bar total enough.
Which regulator is suitable for Aselkon MX10 cal. 4.5mm?
Just came across this,I would love my 303 hilite to be regulated can this be done with this and do you set the regulator for me or do i do it myself
Hello for caliber .303, is need also used an extra chamber with regulated air : www.altaros.cz/domu/107-extra-airchamber-for-high-power.html . We can set the regulator to the required pressure (maximum 190bar). It is best to write a request to regulator@altaros.cz
Isn't 200 bar alot? It is that the guage not accurate...I got one set to 150 and after filling it up it would read 200 bar or that doesn't matter? As I'm sub12
For maximum power with a regulator for larger calibers, this is the most suitable pressure.
@@AirgunRegulator ahaa okay what would you say is good regulator setting for 12ftlb .22 air rifle let's say 15 grain
@@foodconnoisseur8397 for most rifles it was a pressure between 90-120bars. For our M24 rifle for 12ft / lbs is need output pressure from regulator only 35bar, but that's extreme.
@@AirgunRegulator excellent. Thank you so much for the info much appreciated
In anyone's honest opinion, where does the altaros regulator stand up to in quality and shot consistency to the huma regulator? Thank you.
I will tell you this. Huma started by copying the texts from our website, the price of our regulator, and the type of material used for the regulator (paradoxically copied material for one particular regulator, which is not suitable for the remaining regulator).
Above all, he copied our technology for vented regulator without need to drill into airtube.
The shot consistency of both regulators with correct rifle setting will be the same as the output pressure varying of 1-3 bar on the correct sett rifle has no effect at all.
@@AirgunRegulator Thank you. I am now going to order some of your regulators off of eBay. And, do you make the regulators for the hatsan carnivore 9mm air rifle?
@@terrynb12 We did not have this rifle at the workshop yet but the most likely is that it is the same airtube as for the Hatsan BT 65 (internal diameter 27mm) www.altaros.cz/en/hatsan/19-4778-hatsan-bt65-hatsan-galatian-ii-gladius.html . For 9mm caliber it would still be advisable to order from us with additional chambers to increase the volume of regulated air, so best to write on the mail altaros@altaros .cz .
is this a B type or Hilite ??
I am planning to install it on Hatsan Nova 6.35 with current velocity 290ms (jsb 2.2g). Do I need extra modification on regulator to keep current velocity regulated ? Any additional chambers?.
we did not have the chance to test this rifle, so we do not know how much performance it can achieve.
With the regulator, it is now possible to buy an additional chamber with a regulated pressure:
www.ebay.com/itm/Altaros-Airgun-pressure-regulator-with-manometer-with-additional-airchamber/153183962726?hash=item23aa79c666:g:3lkAAOSwGHdbm1uq:rk:7:pf:0
It is best if the required power can be achieved at a pressure of 170bar or lower and the power is higher by 10%, then it is possible to assume a similar power even with the regulator.
The output pressure can be moved by a little over 170 bar.
Nice video instruction, but no still test on chrony and after installation results. Better to make test on bottled pcp. Thanks
Results is on our website : www.altaros.cz/en/daystate/37-daystate-wolverine-b#/|demoTab4
Thanks @@AirgunRegulator