Cylinder Head Cleaning & Valve Lapping
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- How to clean a cylinder head and lap valves on a Kawasaki FR691V Gravely Zeroturn mower engine. Hope you enjoy and are inspired to dig into some heads of your own! All tools used are listed below and other related videos to this project.
Simple Green: amzn.to/3NGnZnq
Ultrasonic Cleaner: amzn.to/3SODnk5
Valve Lapping Tool: amzn.to/3NMmZ14
Valve Lapping Compound: amzn.to/44xw5Vj
Valve Spring Compressor (Small Engine): amzn.to/3UaXPMp
Buffer Balls (work fantastic): amzn.to/42dawYB
Wire Brush Set: amzn.to/3pbfOVT
Scotch-Brite Pads: amzn.to/42qlvxq
Trump Hat: amzn.to/3nBQMyU
Kennedy For President Shirt: amzn.to/3nBJISR
Piston Cleaning Video: • Piston Cleaning in Engine
Mower Mike’s Tool Store: www.amazon.com/...
Mower Mike
Disclosure: The Amazon link above is an Amazon affiliate links. This means that, I do earn a very small commission (at no cost to you) if you click the link and finalize a purchase.
you linked the Valve compound 2 X’s and no Link to SPRING compressor
Marvel Mystery Oil in the gas prevents this type build up and gives extra power and smoothness. It is really Miracle and everyone that uses it just loves it.
Snake Oil Salesman!!! ;)
@@MowerMike lol !!...... it's one of the most legit products I've used, or I wouldn't say it ....
Mike - would you ever do a chest waxing for charity? Or when are you going to work shirtless? We want to see it
Hmmm no, you will just have to use your imagination
I don't think I'd trust a 2"x4" and sandpaper to flatten a head surface. There are some pretty twisted 2"x4"s. Maybe table saw surface would work.
That is some solid advice thanks!
How do I replace a piston do you have a video that could help
I have a few replacing piston rings. It will show you the process, is just a clip
@MowerMike thank you so much your videos are amazing I am watching it now and you make it easy to fallow along thank you so much
Beautiful work man , is there an alternative to use something else instead Valve grind compound , because i cant find to buy in my country
Hmm good question. I bet some fine sand with some water would work, just make sure to clean it before putting it back on.
@@MowerMikeI bet that’s too abrasive. I would prefer toothpaste with baking soda over sand.
lmao,, how'd that grass turn out chief??
Those aren't valve guides...they are valve stem seals. The guides are the long barrels that the seals press onto.
Excellent correction, thanks for the note
I may have missed it but did you check the valve lash (and possibly need to grind the end of your valve stems) after lapping your valves as the clearance has shortened after the lapping process?
Yep after you install the heads you always need to check the valve lash. Check out my Kawasaki head install video to show how to set the lash
Hi.
On modern common rail turbo diesels would you advise to spray Hylomar onto gasket prior to installation?..
I have no idear. Good luck
Well done video on cylinder head cleaning, was just what I was looking for on how to best clean my Kohler cylinder head on my CV493s engine when I do the head gasket this winter :-)
Glad it helps, just have to be patient it takes several cleanings and scrubbings to get them clean. I have another video on piston cleaning you should watch also
@@MowerMike I watched it right after this one Lol; it showed most of what I did not do well the first time I did a head gasket a couple of months ago Lol.
Those were valve seals not valve guides
Am sure you can find more wrong statements than just that in the video lol
@@MowerMike lol
Actually, they are valve SEATS. ;-)
Watched all your Kawasaki videos now lol. Youre a big help brother stay strong in 24 TRUMP!!
Haha thanks glad to help.
Strong work, sir
You must have missed the last 3 minutes of the video
@@MowerMike no I watched the whole thing…but I won’t be dumping cleaning acid in my yard any time soon
Mike, it's not valve guides, it's valve guide seals. It is better to lap the valves before you install the seals.
Damn that is a good point.
Trumper nope not watching you!
Can you explain what that means??? Thanks
@@MowerMike Anyone that can even consider supporting a man like donald trump as the next president clearly doesn’t deserve my support in any way. He is clearly guilty of directing and inciting an insurrection as well as fraud. (Defrauding the public out of owed taxes). He is clearly unstable and only wants to be just like Putin! He wants to be a dictator and you support him. SMH
@@normanjkew5618you're one to talk about someone being unstable, lmao!😂 Big orange boogy man BAD!
The Left is so Tolerant! The party of love! Hypocrite Hacks is what you are!
@@normanjkew5618 You are the sick left that is the problem with this country. Hope you are enjoying the cost of everything now. With any luck, about 1,000 "newcomers" will move into your neighborhood real soon. Don't forget to feed and house them.
Trump 2024 !
Can he win 3 times in a row???? That would be wild
🇺🇸🦅 Kennedy * Trump '24 🇺🇸🦅
I like it!