GSPEED Chassis No thanks needed I thank you for your very informative videos when I finally do get my rails skid etc I'm hoping you don't mind me hitting you up and asking you set up questions etc
Here's a few parts you can use.... . Chassis rails, AR44 panhard mount, sliders and white delrin skid plate gspeedchassis.com/products/gspeed-chassis-carbon-fiber-tgh-v3-package-deal . 2 different servo mounts TGH-DSM gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc - Or the GSPEED G-LD which works well with the GSPEED G-MP panhard mount gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount . Chassis rail spacers gspeedchassis.com/products/gspeed-chassis-square-spacers . Body post holders gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder
Hey Gabe man, love the products. Running a V3 with the TGH FMM, TGH dual servo mount,and AR45 Straight axles. Having a real problem with the panhard hitting the steering servo. Using the first hole on the GPM. Any suggestions?
Sweet Build, I'm curious tho why you have your High Clearance links installed backwards, was that an accident or on purpose? the bend is suppose to be at the skid not the wheels? Thanks
The suspension links are not backwards. The lower links from the skid stay high, creating clearance, until they get to the axle then bend down to mount on the axle. Check out some picture examples on Hardcore RC website or on Team GSPEED Chassis Facebook group
Traxxas big bore www.amainhobbies.com/traxxas-hard-anodized-teflon-coated-big-bore-front-shock-set-long-2-tra2660/p18965 using included shock oil front and rear. Might be 35wt Spring cups for mini T springs www.amainhobbies.com/beef-tubes-losi-mini-spring-beef-tips-aluminum-bftbt006mta/p578544 . Losi Mini T springs www.amainhobbies.com/losi-minit-front-shock-springs-6-losb1117/p54341 . www.horizonhobby.com/product/front-shock-springs-3pr-mini-t-mdt/LOSB1117.html . Pivot ball standoffs dluxfab.com/Big-Bore-Shock-Ends-p6395782
@@GSPEEDCHASSISk thanks. Gonna look into it. If i have any other questions, can I reach out to you again? When I figure out what is needed, I will be ordering from GSpeed.👍
Traxxas big bore www.amainhobbies.com/traxxas-hard-anodized-teflon-coated-big-bore-front-shock-set-long-2-tra2660/p18965 using included shock oil front and rear. Might be 35wt Spring cups for mini T springs www.amainhobbies.com/beef-tubes-losi-mini-spring-beef-tips-aluminum-bftbt006mta/p578544 . Losi Mini T springs www.amainhobbies.com/losi-minit-front-shock-springs-6-losb1117/p54341 . www.horizonhobby.com/product/front-shock-springs-3pr-mini-t-mdt/LOSB1117.html . Pivot ball standoffs dluxfab.com/Big-Bore-Shock-Ends-p6395782 Or www.amainhobbies.com/traxxas-4tec-2.0-shock-caps-black-4-tra8361/p-quaqqsyqyb2xactz
With GSPEED Chassis you would only really be using the 10iii axles. GSPEED TGH-V3 Chassis element/ or custom portal build package deal gspeedchassis.com/products/gspeed-chassis-element-enduro-carbon-fiber-tgh-v3-package-deal-%f0%9f%91%89ships-around-the-11th-%f0%9f%91%88 . Square chassis spacers gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-square-spacers . TGH-DSM gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc or GSPEED G-LD gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount . Body post holders gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder . TGH-2.low gspeedchassis.com/products/tgh-2-low-oops-edition (tight fit with larger motors, but works great) Or the TGH-FMM gspeedchassis.com/products/tgh-v3-forward-motor-mount-and-transfer-case . TGH mirrored skid plate/ drilling kit (if running the TGH-FMM forward motor mount and transfer case with offset differential axles like the AR45) gspeedchassis.com/products/tgh-mirrored-skid-and-drilling-jig-kit-for-the-gspeed-v1-c1-chassis-the-gspeed-tgh-v3-chassis-%f0%9f%91%89ships-on-the-8th%f0%9f%91%88 . Suspension link kits can be purchased here. There are drop down menus to select the parts you are building with, like AR45 axles and G-MP panhard mount. hardcore-rc.ecwid.com/G-SPEED-TGH-V3-p140888561 . Here is some recommended hardware to use Assorted spacers.... teamknkhardware.com/spacers/608-aluminum-spacer-variety-pack.html . 3mm screws, nuts and washers teamknkhardware.com/stainless/2-700-pcs-monster-bag.html
@@GSPEEDCHASSIS I seen the tfr panhard mount recived today in the mail now I don’t know how to mount the servo I bought the tgh servo mount but I’m seeing vids we’re they using the G-LD but my tgh don’t have the holes to mount the G-LD
@@leonelmolinajr2 GSPEED TGH-V3 Chassis element/ or custom portal build package deal gspeedchassis.com/products/gspeed-chassis-element-enduro-carbon-fiber-tgh-v3-package-deal-%f0%9f%91%89ships-around-the-11th-%f0%9f%91%88 . Square chassis spacers gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-square-spacers . TGH-DSM gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc or GSPEED G-LD gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount . Body post holders gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder . TGH-2.low gspeedchassis.com/products/tgh-2-low-oops-edition (tight fit with larger motors, but works great) Or the TGH-FMM gspeedchassis.com/products/tgh-v3-forward-motor-mount-and-transfer-case . TGH mirrored skid plate/ drilling kit (if running the TGH-FMM forward motor mount and transfer case with offset differential axles like the AR45) gspeedchassis.com/products/tgh-mirrored-skid-and-drilling-jig-kit-for-the-gspeed-v1-c1-chassis-the-gspeed-tgh-v3-chassis-%f0%9f%91%89ships-on-the-8th%f0%9f%91%88 . Suspension link kits can be purchased here. There are drop down menus to select the parts you are building with, like AR45 axles and G-MP panhard mount. hardcore-rc.ecwid.com/G-SPEED-TGH-V3-p140888561 . Here is some recommended hardware to use Assorted spacers.... teamknkhardware.com/spacers/608-aluminum-spacer-variety-pack.html . 3mm screws, nuts and washers teamknkhardware.com/stainless/2-700-pcs-monster-bag.html
Sweet build! Love the chassis and layout! This will be my winter build for the 2021 season! Thanks for sharing!
Can't wait to build a gspeed! I contacted you guys through the website, just needing some advice on what I need to get going.
Gabe you make awesome lightweight rigs I'm going to build one some day and of course with your frame rails love Gspeed-LCG the elevation changer
Thank you!
GSPEED Chassis No thanks needed I thank you for your very informative videos when I finally do get my rails skid etc I'm hoping you don't mind me hitting you up and asking you set up questions etc
Will you build me one? I am totally serious!!
Your videos are so helpful thank you so much Gabe! 😊❤
Looks awesome 😍.... I am a newbie to crawlers and want to start building a crawler like yours. Where do I start ? Do I have to buy a SCX10 kit ?
Shoot me an email with this question and I'll set you up. gspeedlcgchassis@gmail.com
Awesome build!! Lookin tough brother
I have an SCX10 Ii and would like to get this set up for my class 2 rig. Is the V1-C1 package what I should get?
Here's a few parts you can use....
.
Chassis rails, AR44 panhard mount, sliders and white delrin skid plate
gspeedchassis.com/products/gspeed-chassis-carbon-fiber-tgh-v3-package-deal
.
2 different servo mounts
TGH-DSM
gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc
- Or the GSPEED G-LD which works well with the GSPEED G-MP panhard mount
gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount
.
Chassis rail spacers
gspeedchassis.com/products/gspeed-chassis-square-spacers
.
Body post holders
gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder
Hey Gabe man, love the products. Running a V3 with the TGH FMM, TGH dual servo mount,and AR45 Straight axles. Having a real problem with the panhard hitting the steering servo. Using the first hole on the GPM. Any suggestions?
Send me an email about it, and I'll help you out. gspeedlcgchassis@gmail.com
clean and compact. 👍 inspirational. ✌
Sweet Build, I'm curious tho why you have your High Clearance links installed backwards, was that an accident or on purpose? the bend is suppose to be at the skid not the wheels? Thanks
The suspension links are not backwards. The lower links from the skid stay high, creating clearance, until they get to the axle then bend down to mount on the axle. Check out some picture examples on Hardcore RC website or on Team GSPEED Chassis Facebook group
No they’re not lol.
Just curious, why didn't you install the winch on the dual servo mount? What is your track width with those wheels? Nice hardbody build.
Servo winch relocated for lower center of gravity. Track width is a little under 10"
Amazing work 🔥 Traxxas a big bore shocks 👍🏻 but what springs did you put on there. Thx. 👊🏻
Traxxas big bore
www.amainhobbies.com/traxxas-hard-anodized-teflon-coated-big-bore-front-shock-set-long-2-tra2660/p18965 using included shock oil front and rear. Might be 35wt
Spring cups for mini T springs
www.amainhobbies.com/beef-tubes-losi-mini-spring-beef-tips-aluminum-bftbt006mta/p578544
.
Losi Mini T springs
www.amainhobbies.com/losi-minit-front-shock-springs-6-losb1117/p54341
.
www.horizonhobby.com/product/front-shock-springs-3pr-mini-t-mdt/LOSB1117.html
.
Pivot ball standoffs
dluxfab.com/Big-Bore-Shock-Ends-p6395782
Great build sir!! Just getting started into this crawler stuff. So all you need is a scx2 builders kit and GSpeed chassis to start?
Thank you. with some extra hardware and spacers that will basically get you a good start. Or start with an Enduro and the GSPEED Enduro kit
@@GSPEEDCHASSISk thanks. Gonna look into it. If i have any other questions, can I reach out to you again? When I figure out what is needed, I will be ordering from GSpeed.👍
@@danielsonhobbies no problem. There's also lots of great info on Team GSPEED Chassis group on Face book
Gabe. Did you eventually use the G-LD laydown steering servo mount on this beast? Thanks.
Yes sir. Had it installed at C4C running this line
th-cam.com/video/DJylJaIHEmk/w-d-xo.html
🤩💥💯👍👏
Awesome 😎 build... my favorite chassis!!!
Thank you!
Hi. Trying to understand SORRCA rules. Can I run this v3 frame in class 1 and 2?
TGH-V3 is class 2 and 3 legal. The V1-C1 GSPEED Chassis is the class one Chassis
www.rccrawler.com/forum/scale-comp-rules/614519-2020-sorrca-rules.html
Hi Gabe. What is your favorite remote for crawling if budget wasn’t an issue?
I use a Futaba 4PLS that I like but I don't have a lot of experience in radios and there may be plenty out there that is better.
Sick build
Thank you
Awesome build. What length are your big bore shocks ?
84mm
Traxxas big bore
www.amainhobbies.com/traxxas-hard-anodized-teflon-coated-big-bore-front-shock-set-long-2-tra2660/p18965 using included shock oil front and rear. Might be 35wt
Spring cups for mini T springs
www.amainhobbies.com/beef-tubes-losi-mini-spring-beef-tips-aluminum-bftbt006mta/p578544
.
Losi Mini T springs
www.amainhobbies.com/losi-minit-front-shock-springs-6-losb1117/p54341
.
www.horizonhobby.com/product/front-shock-springs-3pr-mini-t-mdt/LOSB1117.html
.
Pivot ball standoffs
dluxfab.com/Big-Bore-Shock-Ends-p6395782
Or
www.amainhobbies.com/traxxas-4tec-2.0-shock-caps-black-4-tra8361/p-quaqqsyqyb2xactz
Gabe on that short driveshaft between the transfer case and transmission do you have a part number for that? Thank you
supershafty.com/collections/drive-shafts/products/all-new-supershafty-driveshafts?variant=32232971796574
65 to 75mm
What did you use for the lil grooved pulley on top of your body for the top winch line mount?
That's the G-Spot.
gspeedchassis.com/products/gspeed-chassis-g-spot-not-just-a-spot
Very very nice!!!
Thanks bro
This blows my mind. Please take my money.
Thanks bro. www.gspeedchassis.com 😎
What's the build list on this?
Total rig weight, and how heavy is the hardbody itself?
Total ready to run rig weight is 6 1/2 pounds. Haven't weighed the body yet
Can I ask where you got your bumper with the offset fairlead?
Custom made by Bentmetal Customs facebook.com/Bentmetal-798536523527216/
Have you looked into running a stripped down a vanquish vfd transmission?
I don't have experience with that transmission, but we definitely have a few team drivers that love building with it
I have a complete 10.3 that I’m wanting to do this with. Can I get some links to some of the parts I will need? Thanks
With GSPEED Chassis you would only really be using the 10iii axles.
GSPEED TGH-V3 Chassis element/ or custom portal build package deal
gspeedchassis.com/products/gspeed-chassis-element-enduro-carbon-fiber-tgh-v3-package-deal-%f0%9f%91%89ships-around-the-11th-%f0%9f%91%88
.
Square chassis spacers
gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-square-spacers
.
TGH-DSM
gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc
or
GSPEED G-LD
gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount
.
Body post holders
gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder
.
TGH-2.low
gspeedchassis.com/products/tgh-2-low-oops-edition (tight fit with larger motors, but works great)
Or the
TGH-FMM
gspeedchassis.com/products/tgh-v3-forward-motor-mount-and-transfer-case
.
TGH mirrored skid plate/ drilling kit (if running the TGH-FMM forward motor mount and transfer case with offset differential axles like the AR45)
gspeedchassis.com/products/tgh-mirrored-skid-and-drilling-jig-kit-for-the-gspeed-v1-c1-chassis-the-gspeed-tgh-v3-chassis-%f0%9f%91%89ships-on-the-8th%f0%9f%91%88
.
Suspension link kits can be purchased here. There are drop down menus to select the parts you are building with, like AR45 axles and G-MP panhard mount.
hardcore-rc.ecwid.com/G-SPEED-TGH-V3-p140888561
.
Here is some recommended hardware to use
Assorted spacers....
teamknkhardware.com/spacers/608-aluminum-spacer-variety-pack.html
.
3mm screws, nuts and washers
teamknkhardware.com/stainless/2-700-pcs-monster-bag.html
Thank you!
If I use the 2low trans, I don’t have to use the mirrored skid for the ar 45’s right?
@@taylorweisenberger3251 right
What is the wheel base of that crawler? Is it 12.3”?
12.5
The hard body is gorgeous! But the layout leads to a huge imbalance! Motor and battery simply cannot be on 1 side of the truck... ;-)
Thank you for your input
Nice work looks sick 🤙!!!SVS!!!
Do you get better traction with the og klr mounted backwards
They work amazing both directions. When they start wearing a little too much one way, I flip them around 😎
Are you running 2.2 or 1.9 size tire
These are Ottsix Racing Voodoo KLR 1.9/4.70 gold compound
What springs are you running on those Traxxas big bore?
Dravtech firms on the front which are pretty soft and orange miniT on the back. No preload cup all around with the front shocks limited 4mm
@@GSPEEDCHASSIS awesome and thank you for your response and assistance
@@GSPEEDCHASSIS you happen to have the part # for the shocks?
@@rickboyster8014 TRA2660
@@GSPEEDCHASSIS thanks pal and again amazing build
Is the tgh mount for ar44 ?
The TFR panhard mount is for AR44
@@GSPEEDCHASSIS order the wrong part lol
What about the g-ld I was trying to mount servo to the tgh but it’s not gonna work links in the way so I need TFR pan hard and the G-LD ?
@@GSPEEDCHASSIS I seen the tfr panhard mount recived today in the mail now I don’t know how to mount the servo I bought the tgh servo mount but I’m seeing vids we’re they using the G-LD but my tgh don’t have the holes to mount the G-LD
@Faus_XV10 I'll help you out. To difficult in a TH-cam comment. Send these issues to my email with pictures.. gspeedlcgchassis@gmail.com
Which hard body is that?
RC4WD Mojave II that has been cut and modified
@@GSPEEDCHASSIS I want to build a truck like you got in the video...what parts am I going to need?
@@leonelmolinajr2 GSPEED TGH-V3 Chassis element/ or custom portal build package deal
gspeedchassis.com/products/gspeed-chassis-element-enduro-carbon-fiber-tgh-v3-package-deal-%f0%9f%91%89ships-around-the-11th-%f0%9f%91%88
.
Square chassis spacers
gspeedchassis.com/collections/tgh-v3-products/products/gspeed-chassis-square-spacers
.
TGH-DSM
gspeedchassis.com/products/team-garage-hack-dual-servo-mount-%f0%9f%91%89available-4-29-20%f0%9f%91%88-vendor-tgh-rc-concepts-llc
or
GSPEED G-LD
gspeedchassis.com/products/gspeed-chassis-g-ld-laydown-cms-servo-mount
.
Body post holders
gspeedchassis.com/products/gspeed-chassis-g-2s-two-screw-body-post-holders-preorder
.
TGH-2.low
gspeedchassis.com/products/tgh-2-low-oops-edition (tight fit with larger motors, but works great)
Or the
TGH-FMM
gspeedchassis.com/products/tgh-v3-forward-motor-mount-and-transfer-case
.
TGH mirrored skid plate/ drilling kit (if running the TGH-FMM forward motor mount and transfer case with offset differential axles like the AR45)
gspeedchassis.com/products/tgh-mirrored-skid-and-drilling-jig-kit-for-the-gspeed-v1-c1-chassis-the-gspeed-tgh-v3-chassis-%f0%9f%91%89ships-on-the-8th%f0%9f%91%88
.
Suspension link kits can be purchased here. There are drop down menus to select the parts you are building with, like AR45 axles and G-MP panhard mount.
hardcore-rc.ecwid.com/G-SPEED-TGH-V3-p140888561
.
Here is some recommended hardware to use
Assorted spacers....
teamknkhardware.com/spacers/608-aluminum-spacer-variety-pack.html
.
3mm screws, nuts and washers
teamknkhardware.com/stainless/2-700-pcs-monster-bag.html