Fixing Heat Press - Heat Press Nation 16x20 Press (Vlog 242)

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น •

  • @garcitop
    @garcitop 6 ปีที่แล้ว +2

    Hi. I have own this machine for 3 years already. The hot platen is supposed to wobble so when you press, it finds the best flaten position. Specially with thicker material such as slates.

    • @RhyBeats
      @RhyBeats  6 ปีที่แล้ว +1

      Yup, I found that the hard way

  • @deweydi2
    @deweydi2 4 ปีที่แล้ว +2

    How can I fix my heat press if I don't have any springs on the bottom to hold the top up. I can't find any spring replacements

  • @booskibelair4115
    @booskibelair4115 3 ปีที่แล้ว +1

    Do you know how to fix one that won’t clamp down?

  • @lauracadriel1602
    @lauracadriel1602 ปีที่แล้ว +1

    can you tell me how to calibrate the heat settings on my heat press please? I have a 15x15 CraftPro and its so hard to get a hold of Heat Press Nation!!!!!

    • @RhyBeats
      @RhyBeats  ปีที่แล้ว

      Do you have a temp gun? That would be your best tool to get the correct temp

  • @alwayzblessnme
    @alwayzblessnme 2 ปีที่แล้ว +1

    I have the same one. Can I remove the top plate and add smaller press in the area you removed?

    • @RhyBeats
      @RhyBeats  2 ปีที่แล้ว

      I dont think so

  • @noeliamontecinos-beltran6097
    @noeliamontecinos-beltran6097 ปีที่แล้ว +1

    I have a heat press and its 15x15 i have to manually open it, but now it will not open all and i was using it and it was on so i turned it off completely since i cannot open the machine now i dont know what to do or how to fix it or what to unscrew so it can open back up again

    • @RhyBeats
      @RhyBeats  ปีที่แล้ว

      What brand do you have? If it’s a Heatpress nation brand. I’m sure they can help you with that

  • @roderick1371
    @roderick1371 2 ปีที่แล้ว +1

    Hey I bought a used heat press but it only has one bracket up under lower platen to keep it on...do you know where I can find the other brackets

    • @RhyBeats
      @RhyBeats  2 ปีที่แล้ว

      No sorry, I would try to contact the manufacturer

  • @hughey271
    @hughey271 2 ปีที่แล้ว +1

    my wife has a 5 in 1 swing heat press and one of the little handles on top came off (not broken), and we're wondering how to take it apart to reattach it... if u can help, thanks

    • @RhyBeats
      @RhyBeats  2 ปีที่แล้ว

      That’s a great.question. I have no idea on how to do that

  • @MyGrunt0311
    @MyGrunt0311 4 หลายเดือนก่อน +1

    doesn't that cover you put at the top belong on the bottom

    • @RhyBeats
      @RhyBeats  4 หลายเดือนก่อน

      I can’t remember. But It suppose to be for the heating element

  • @harley2316
    @harley2316 2 ปีที่แล้ว +1

    hi i just got the craft pro and i think the.pressure gauege is not turning wont open can u help me please

    • @RhyBeats
      @RhyBeats  2 ปีที่แล้ว

      Sorry i don’t know how that press works.

  • @kctsp6631
    @kctsp6631 6 ปีที่แล้ว +1

    Good video, I have the same heat press. Do you have a video on repairing the "Timer actuator switch". unfortunately my broke off tonight. It looks like not a so hard fix but then again I dont want to mess with it and really screw it up, any advise? thanks

    • @RhyBeats
      @RhyBeats  6 ปีที่แล้ว

      KC TSP thanks for Watching the video. Sorry but I don’t know how to fix that. I would call Heat Press Nation. But I will check and take a look at it

    • @ms.kraftykreations5699
      @ms.kraftykreations5699 6 หลายเดือนก่อน

      Hello. Did you get a response for repairing the "Timer actuator switch?" I broke mine today.

  • @1999maio
    @1999maio 6 ปีที่แล้ว +1

    I have the same heat press but with a black plate mounted to the top of the actual white top platen. I have lost pressure over time and can't find the right combo of adjustments to getting the pressure back. Literally have the screw knob completely turned down 100% will little to know pressure. I'd supply a pic but can't on youtube comments... ever have an issue with loosing pressure?

    • @RhyBeats
      @RhyBeats  6 ปีที่แล้ว

      Hey David, sorry for the reply. Email me the pics at RhyBeats@gmail.com

    • @Kevsins915
      @Kevsins915 4 ปีที่แล้ว

      This is happening to me rn, I can’t loosen it more the knob won’t turn to loosen

  • @jericomanalastas412
    @jericomanalastas412 4 ปีที่แล้ว +1

    Hello
    would like to ask for help on how to fix our heat press? It is so light to press no need to push and pull hard.
    Thanks in advance

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว

      Oh man… I’m so late on the response. Hope you got it figured out

  • @8ntnun
    @8ntnun 3 ปีที่แล้ว +1

    How do you get pass the specifications saying to plug in by itself being in an apartment or home without blowing the circuit breaker or a fuse

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว +1

      You need to find what that plug/circuit is Hooked up to.

    • @8ntnun
      @8ntnun 3 ปีที่แล้ว +1

      @@RhyBeats no,my machine requires a 20amp. outlet but I only have 15amp. outlets in my extra bedroom........what can I do

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว +1

      @@8ntnun you need to look at the breakers and find a 20 amp circuit. It should have a label

  • @srdesigneredition6407
    @srdesigneredition6407 4 ปีที่แล้ว +1

    Thank you for this video , I have to get mines soon.

  • @TshirtChick
    @TshirtChick 7 ปีที่แล้ว +1

    You got me thinking about getting this press. It's actually on sale right now.

    • @RhyBeats
      @RhyBeats  7 ปีที่แล้ว +1

      TshirtChick yes, I saw that! I haven’t used it yet, but it’s built very well. The slide out drawer is a winner!

  • @JGreenVA
    @JGreenVA 3 ปีที่แล้ว +1

    Mine will turn on, but will not respond to any pushing of the buttons. Any ideas for what’s going on?

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว

      Sound like the electronics. Might want to take the board off and take a look

  • @angeladural731
    @angeladural731 4 ปีที่แล้ว +1

    Where can I purchase a power cord? My power cord is damaged.

    • @RhyBeats
      @RhyBeats  4 ปีที่แล้ว

      You can make your own . By cutting the end of an extension cord

  • @dannenpowell8866
    @dannenpowell8866 3 ปีที่แล้ว +1

    How do you keep it closed when off? Mines won't close when off

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว +1

      You might a mechanical issue on your press. Try backing out the pressure

    • @dannenpowell8866
      @dannenpowell8866 3 ปีที่แล้ว +1

      @@RhyBeats I did that a couple times it still opens I just don't want to send it back. It's sits open the whole time and I know that's not good

    • @RhyBeats
      @RhyBeats  3 ปีที่แล้ว

      @@dannenpowell8866 ya not sure. I was thinking maybe the magnet if it’s an auto-open one. I would say get it open and see what’s causing it

    • @67gabrieleb
      @67gabrieleb 3 ปีที่แล้ว

      Hi I came here for that same question. I messed around with the screw that’s above the magnet. At the moment it’s closed.

  • @deborahlawrence8858
    @deborahlawrence8858 4 ปีที่แล้ว

    Hi left my heat press closed in storage now I can't get it open. Any suggestions?

  • @liameneuk
    @liameneuk 5 ปีที่แล้ว +2

    I think the wobble is intentional for even pressure distribution.

    • @RhyBeats
      @RhyBeats  5 ปีที่แล้ว

      I think so too

  • @dalmaroman1362
    @dalmaroman1362 4 ปีที่แล้ว

    hi my name is dalma lam trying to fine someone to fix my machine 16x20 the label felled out.
    can fine the brand. what can l do ?

  • @raylinevangelio4666
    @raylinevangelio4666 8 หลายเดือนก่อน +1

    Sir tanong lng po ako, meron po akong Automatic open A3 heatpress tapos hindi po nag auto open or hindi gumana yung auto open, ano po yung gagawin ko sir? Thankyou po

    • @RhyBeats
      @RhyBeats  8 หลายเดือนก่อน

      Check you contact connection on that magnet. You might not be getting power

  • @johnphillips8196
    @johnphillips8196 9 หลายเดือนก่อน +1

    umm, sorry, but not a pipe wrench, they are channel locks

    • @RhyBeats
      @RhyBeats  9 หลายเดือนก่อน

      Ya I know, I got called out already. I knew what it was.. but I kept calling it a pipe wrench. 😂

  • @staceytaylor9196
    @staceytaylor9196 6 ปีที่แล้ว +1

    I have had SO many problems with this machine!

    • @RhyBeats
      @RhyBeats  6 ปีที่แล้ว

      Stacey Taylor what kind of issue are you having?

    • @missbrowneyedteacher
      @missbrowneyedteacher 6 ปีที่แล้ว +1

      @@RhyBeats Im having trouble with mine locking down and staying locked! We replaced the time actuator switch after it broke off because we thought that was the problem

  • @dalmaroman1362
    @dalmaroman1362 4 ปีที่แล้ว

    l live in Tampa my zipcode is 33578 if you know about a heat press tee-shirt shop machine let me know