Awesome video! One of the more helpful ones out there! Thanks a lot 👌 I've come up with a theoretical question on the possibility of using a computer to record a sound on the ISD 1820. 1. Desolder and remove the microphone 2. Strip the ends of a 3.5mm jack 3. Solder the wires to the circuit board where the mic was 4. Plug 3.5mm jack into audio jack on computer 5. Press record on chip and play sound through computer In theory, this would allow the chip to record the signal being transmitted through the 3.5mm jack! But I've also thought of counterarguments, haha: • The 3.5mm jack is line-level. The ISD 1820 is expecting a mic-level signal to send to the "on-chip preamp" (according to a spec sheet). According to an article I googled, "connecting a line-level source […] to a mic-level input will cause the sound to be loud and distorted because the line signal is much stronger than what the mic input will accept". So that sucks. But perhaps difference in voltage can be mitigated by attaching a resistor to the 3.5mm? Step it down from the 1.000V range to the .001V-.010V range... Ok, my brain is hurting, I'll think about this part later. • I don't even know if the signals are compatible. I mean, I think they're both analog, and they obviously both involve sound frequencies, but what do I know? • All the 3.5mm cables I have lying around are stereo, so I would only be able to attach one channel to the circuit. I think this is inconsequential, though. If anyone is still reading this comment, tell me your thoughts! I'll probably be experimenting with this in the near future :)
First and foremost, yes... read the whole thing. Sounds like some great ideas to me and actually already more thought out than my first thoughts (I had not considered the counter arguments you came up with). If you get it to work I'd love to hear how it turned out. I also agree that the stereo input seems inconsequential to the effect. On the face of it the wiring seems straight forward but there is definitely a reason there are different input jacks for microphone and aux sources. Thanks for taking the time to watch my video and post the very kind comment... and follow-up thoughts.
you can do this, you have to turn the output on the pc way down.. i have done this before making operator errror messages for my voicemail 15-20 yrs ago.. and for your argument with stereo edit the sound file and convert it to mono
First of all i want to appreciate you that you are trying to give answers to the questions on almost every question in the comment box , while other youtubers hardly do that.(sorry for my bad english). Sir, i m a house wife and doesn't have enough technical knowledge ,but i really really want to make my own customized soft doll for my toddler.can you please guide me in some details about what things i have needed to make a doll which have inbuilt buttons in her both palms and in both the feets and when pressed any of button, a prerecorded audio plays.for example, when we press its right palm , a morning time routine audio plays,when left palm press, a lullaaby plays, when we touch or press its right feet, a bed time routine audio plays, etc. I will highly appreciate you if you guide me in this project. Kindly reply back sir, I m impatiently waiting for your reply.Thank You !
Sorry for such a delay in reply on this one but it has been a challenging spot of time for a bit. The good news is that the exact type of thing you are looking for is sold on places like Amazon. I think this one (noted with more details in the video description) may be what you are looking for: Voice Module, 30s Recordable Music Sound Voice Module Chip 0.5W with Button Cell Battery (Wired Double Button Control)
Wow! This is EXACTLY what I've been looking for all day. Question about using different speakers though, is there anything that needs to be thought about when getting a higher quality speaker? Like do you need to alter the voltage, and is there a certain type of speaker I should look for that can give me a decent range as far as playback? Also, I know you showed using an upgraded power source and speaker with the ISD1820, but what about upgrading one of the ones that you can directly upload your own sounds to? Thanks!
Great questions. If you are trying to go big with speakers then you'll need an audio driver / power source but I've not needed to do that yet. I also use power packs to match the board requirements re volts. The other chip sets you can download to should do the same but if you double check the part specs from the seller you can get the precise limits. Hope that helps.
Hi great video, would you be able to recommend a sound board that would have a enough memory to play several hours of auto at good quality. I would also need to include buttons with functions such as play/stop, next, previous almost like an mp3 player. Thanks.
Amazing video. Thank for sharing so much. And I have a question could you please tell me what happen if I want to add sound into a book, and when I open each page, the different sound can be turned on automatically ? And when I close to open next page, the old sound will be turned off and the new sound of the next page will be turned on?
I understand if you're not able to answer this but I do have an inquiry. I have a toy that moves, and I'm not able to replace the sound that's on the board inside it. I'm assuming that if I remove the speaker from the original board that will eliminate the problem of the original sound playing. So if I did that, and added as well a new board with a new sound, would there be a way for me to wire the new board up to the same button, so that the button both triggers the sound from the new board and the movement from the old board? I hope this makes sense >-
i still got a woody doll, i dont need it anymore but when i can change it what it says it would be a nice present for my next boyfriend, would be awesome ^^
Looking to add a sound file to a lightgun build. Out of all the sound recorders you tested, which one did you find had the fastest start to play once pushing the play button? The lag of some of these is unusable in this particular instance but I'm sure there's something out there that would work. Thanks!
Man that is a great question and to be honest, now I am a bit disappointed that I never considered tracking that. In total seriousness I do not know because I was too focused on quality of playback and volume. As best as I recall this chip had a response time similar to a soundboard on a cell phone. BTW, love the idea with the sound file for a lightgun. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@@DialedInDIY Tons of soundfonts out there. Went with a DFPlayer Mini MP3 Player. Uses a micro SD card but plays fast and doesn't need an Arduino or anything extra to function. Haven't installed it in the gun yet however all my testing leads me to think it will work great. It's also the one guys use in Star Wars blasters and light sabers so lots of info out there for it.
Great channel. I have been trying to figure out how I could hack my son's Baby Einstein Mini Magic Touch Piano and change the sounds. I essentially want to turn load drum machine sounds. Can you please make a video on this or direct me to where I could find information on how to make this happen!!!
Thank you so much for the kind words. I like the idea you have and I think there are several ways to do this that range from somewhat simple to more complex. On the more simple side you could change the connection to each of the keys to separate sound chips by connecting the button under the key to the trigger connection on the chip. To be more efficient you could work down the options of micro-controllers to program a sound to each key. I'm wondering if Arduino or Raspberry Pi could do this easily.
Great question and yes... but it requires a different chip board. This one is designed for a single recording but there are others that will run sequences of recordings in order with each new push of the button. I'd love to hear how it turns out if you get a chance to come back with an update. Thank you for taking time to watch my video and post a comment. I really appreciate it!
Very doable... I have used the soundboard from a "non-toy" to replace a toy sound board for more comical effect... but I was "asked" to switch it back. LOL
Great question. Some of the modules support repeat playback. It will say in the details section from the seller. Usually those will repeat up to a specific amount of time and then turn off. Hope that helps.
Not sure if Light activated module is capable of connecting to pc, i really want to save a specific audio file on it that plays while you open a present :D, any thoughts?
I think what you are describing is very doable. The sound board would connect for audio download and a separate light module could be used for the trigger/switch action. Is that what you were working towards making work?
I am not sure what size will fit that also lets you have multiple files run like the original board... at least not one that fits inside the case/box inside Woody. I've considered using similar boards attached to the original box but have not yet tried.
I'm wondering how much work it'd be to switch out the recordings on educational toys for toddlers (with numbers, letters, animal/object names etc most often from Fisher-Price, ). Most only come in English, but I'd like to hack them to say those words in my language (very few toys, if any, speak my language). Any tips?
Was a very informative video but I'm still slightly confused. Basically I have a mini fridge that plays 3 different sounds when you open it but would I be able to reprogramme the sound chip to just play one track that I have on a file or would I have to replace the sound chip in order to programme it with a sound/track I want?
Great question. The answer depends on the chip on board. Most likely you will have to replace the sound board. I've yet to find one inside anything that can be reprogrammed unfortunately.
@@DialedInDIY Hi, I recently decided to try give it another go and have opened up the compartment where the soundboard lies, if I sent you a picture of the soundboard would you be able to know if it needed a new board and potentially how I could create a module that plays a jingle?
I'm curious about whether it's possible to re-record a set of talking flash cards. I'd love to get a set for my grandson, but we're Australian and as you know, we have a very unique accent. I'd rather he didn't pick up an American accent
Hey I'm curious to know how those electronic floor mats work. Where you step on them and they play music or make other things happen. Do you think you can do a video where you take one of those apart and explain how it works?
So i wanted to do a pull string system with a custom sound. Can i find it on internet easily ? Or Can i turn the device you used to work with a pull string system?
The item I used in this video will do the sound and a pull string mechanism can be connected to it for the trigger/switch action. I'm guessing a pull string switch can be found on line (seems like everything can these days) but I have not searched before. If you find something that works for you I'd love to hear about it. Thanks for taking the time to watch my video and post a comment.
I want to mount at least 10 push buttons on a panel and when I push each button a different message plays and I can change the messages as needed,adjust volume etc. What device do you recommend I can use to accomplish this?
Do you mean having a longer recording that plays back for part of it and then when it is activated again it plays from where it last stopped? I am thinking that is what you mean and I do think there are some that do that. There are definitely modules that allow for multiple recordings and then they play back in sequence each time it is activated.
Ah, I like that idea.... something more than "there's a snake in my boot." Thank you for taking time to watch my video and post your feedback. I really appreciate it! [So sorry for the delay... life kinda got in the way for a bit]
First of all... that sounds like an awesome idea! Most things like that have chip boards that cannot be re-recorded so you would have to do an Elmo Operation and change out the sound board.
Thank you so much! I greatly appreciate the feedback. If you add voices to them I'd love to hear how it turned out for you. I think those should work great because there is plenty of room to work with inside.
I'm so very new to this but my son is a huge fan of Ghostbusters and I'd love to make him a proton pack for Halloween! Complete with activation and shooting sounds of course...where do I start? 😬
[So sorry for the delay... life kinda got in the way for a bit] This sounds like a really fun project. I think the first place to start is the design and size. Once you have that in mind you can decide what you have space to add in. Sounds like you will need lights (some form of LEDs), a sound chip, a speaker and a battery pack to run them all. Thanks for taking the time to watch my video and post a comment.
I am refurbishing a large framed backlit waterfall scene and want to add a waterfall sound track that plays when plugged in. I'm a novice so not sure how to go about it. Thanks for any advice.
Have you ever come across a solution with a pcb like these that when button is pressed plays a recorded message then allows user to record their own message and each time this occurs, a new, unique message file is created and stored. Kind of like the concept of a voicemail box but on a pcb so it can be put into a unique application?
I've been using 3.7v Li-Ion batteries with great success. When the space is available I use the size 18650 since I salvage those from older battery packs. The seller indicates that they have a 10 second record / playback duration but I have found you actually get a few more seconds. Thanks so much for watching and taking the time to post a comment (sorry for the delayed response).
The buttons have different playback features but run the same audio clip/sound (hope I gave you the answer you were looking for). Thank you for taking time to watch my video and post a comment. I really appreciate it!
These were rated for 3v DC which means a button cell should have worked. I merely up-scaled to a 3.7v LiIon battery. The pack you see in the video is one that I made in a prior video which you can find here: th-cam.com/video/V6w1NZH-fLE/w-d-xo.html Hope that helps to answer your question. Thanks for watching and commenting!!
im thinking of trying something like this but i need to have at least 6 different phrases that it either plays randomly or in order (doesnt really matter which) is this possible?
Hey bro, i am new at this, i am really looking for how to be able of make those talking botton, i dont even speak the lenguaje but i could totaly undestend what you habe teach here. There are a posibily for you to teach us how to make those talking botton please?
I appreciate the feedback.Thanks for taking the time to watch my video , post a comment and giving a sub! Hope you like checking out some of my other videos too.
If you are wanting to add something like this to another device that you are powering up independently perhaps you can wire the button mechanism to the on/off switch of the device. If the device you are connecting it to is the source of power for this chip set then it is probably even easier. Just make sure the power from device is compatible with power the chip set needs. Hope that makes sense.
@@DialedInDIY that helps I’ll def need a voltage reducer but I need a way to bypass the button so it plays when voltage is supplied all I need to do is get it to play when I start my car
Just want to make sure I understand the Q... do you mean see if one of these would fit in a fingerlings? If that is the question then I think it would need a smaller device. The speaker and chip would not fit inside. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@@DialedInDIY its somewhat close. So basically what I mean is if it's possible to do this but with a toy like fingerlings, untamed or grimlings if that make sense. I wanna know since I wanna make a custom fingerlings using so knockoff one and replace the sounds to fit the animal. Also if possible could you do a video on it?
Thank you very much! FYI, this is the perfect example of a comment that I did not receive a notification for (I saw this when I came to reply to the other comment).
hey i was wondering if there are chips like this that could record 3-5mins of audio? because i saw on the description that this can only record up to 10secs :((
There are chips that can record much longer clips... the price point starts to go up quick though. I think one of the items I noted in the description was a greeting card type of chip that can record for much longer. [So sorry for the delay... life kinda got in the way for a bit]
Hi. I'm getting ready to start making creepy dolls for Halloween. I need them to be sound, light or motion activated and most importantly, be able to randomize several recordings. So, a doll that says 5 things, one each time it is activated, then says another thing the next time it is activated. Is there something already available for that?
Great question... it is built into the board. For a point of reference, if you look at roughly the 1 minute mark of the video you can see a round, black spot in the top left corner. That is the microphone. Thank you for taking the time to post a comment/question!
Is there a way to do this but have multiple messages, each one activated by a different switch? For example, if I wanted to put it in a stuff animal and have one message in the arm, one in the leg and one in the stomach but only one chip.
Absolutely!.. there are versions made that have these kind of options built in. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@@DialedInDIY Thanks, do you have any recommendations for one that has, one board, with batteries, microphone, and speakers, but that can record multiple messages each one being activated by a different switch.
@@shoshannahnewman2071 I have not used one yet but I have seen several like that on Amazon and other sites. Sorry I dont have a specific one that I can recommend.
Hello, I was hoping you could help me with something regarding a sound thing like this. I had a box that when opened would play a song but when I put in a battery one day the battery exploded and the metal parts that hold the battery on place fell off. Is it possible to fix it or would it be better if I bought another sound module thing?
Depending upon how much damage was done to the other parts it could totally be fixable. If the battery left chemicals inside then you need to see if it can be safely cleaned up (which also depends on the type of battery). My guess is that the metal parts that came out slip into a section where they can actually be put back. If that is the case then it is simply a matter of making sure the metal contacts/touches the spots needed between the battery and the wires. I have this happen on old items that batteries were left inside for far too long. Usually I can just put parts back, clean the corrosion off with some sandpaper and get everything working again.
I'm pretty sure (but not positive) that it is Voice Module, 30s Recordable Music Sound Voice Module Chip 0.5W with Button Cell Battery (Wired Double Button Control) -- listed in the description with a link.
If the video was able to help in some way I am very glad to hear it... thanks for your feedback. I appreciate you watching and taking time to post your question.
I am making a stuffed toy of Mr Noseybonk and i am wanting to put a sound maker in it ti play the song 'A hippo Named Hubbard' this will hopefully help.
I love it... that is perfect. I found a YT video that had a link in the description ti diwnload the wave file; th-cam.com/video/7T7CTyjJP2Q/w-d-xo.html
I'll be making a toy dinosaur go "YASSSSSSS!" instead of roar for a birthday present.
LMAOOOO
Recording it or downloading it? Thanks for watching and taking time to comment! I really appreciate it.
@@DialedInDIY I'm not sure yet. I'll decide once I get the dinosaur.
very nice!! 🦖
why not the YEEEEEEEE Sound xD
Awesome video! One of the more helpful ones out there! Thanks a lot 👌
I've come up with a theoretical question on the possibility of using a computer to record a sound on the ISD 1820.
1. Desolder and remove the microphone
2. Strip the ends of a 3.5mm jack
3. Solder the wires to the circuit board where the mic was
4. Plug 3.5mm jack into audio jack on computer
5. Press record on chip and play sound through computer
In theory, this would allow the chip to record the signal being transmitted through the 3.5mm jack! But I've also thought of counterarguments, haha:
• The 3.5mm jack is line-level. The ISD 1820 is expecting a mic-level signal to send to the "on-chip preamp" (according to a spec sheet). According to an article I googled, "connecting a line-level source […] to a mic-level input will cause the sound to be loud and distorted because the line signal is much stronger than what the mic input will accept". So that sucks.
But perhaps difference in voltage can be mitigated by attaching a resistor to the 3.5mm? Step it down from the 1.000V range to the .001V-.010V range... Ok, my brain is hurting, I'll think about this part later.
• I don't even know if the signals are compatible. I mean, I think they're both analog, and they obviously both involve sound frequencies, but what do I know?
• All the 3.5mm cables I have lying around are stereo, so I would only be able to attach one channel to the circuit. I think this is inconsequential, though.
If anyone is still reading this comment, tell me your thoughts! I'll probably be experimenting with this in the near future :)
First and foremost, yes... read the whole thing. Sounds like some great ideas to me and actually already more thought out than my first thoughts (I had not considered the counter arguments you came up with). If you get it to work I'd love to hear how it turned out. I also agree that the stereo input seems inconsequential to the effect. On the face of it the wiring seems straight forward but there is definitely a reason there are different input jacks for microphone and aux sources.
Thanks for taking the time to watch my video and post the very kind comment... and follow-up thoughts.
you can do this, you have to turn the output on the pc way down.. i have done this before making operator errror messages for my voicemail 15-20 yrs ago.. and for your argument with stereo edit the sound file and convert it to mono
Thank you so much for providing such clear and easy to follow instructions. I've been trying to figure this out for a long time
Doing this to a popular toy then returning it to be put back on the shelf after changing its phrases would be fun lol
First of all i want to appreciate you that you are trying to give answers to the questions on almost every question in the comment box , while other youtubers hardly do that.(sorry for my bad english). Sir, i m a house wife and doesn't have enough technical knowledge ,but i really really want to make my own customized soft doll for my toddler.can you please guide me in some details about what things i have needed to make a doll which have inbuilt buttons in her both palms and in both the feets and when pressed any of button, a prerecorded audio plays.for example, when we press its right palm , a morning time routine audio plays,when left palm press, a lullaaby plays, when we touch or press its right feet, a bed time routine audio plays, etc. I will highly appreciate you if you guide me in this project. Kindly reply back sir, I m impatiently waiting for your reply.Thank You !
Sorry for such a delay in reply on this one but it has been a challenging spot of time for a bit. The good news is that the exact type of thing you are looking for is sold on places like Amazon. I think this one (noted with more details in the video description) may be what you are looking for: Voice Module, 30s Recordable Music Sound Voice Module Chip 0.5W with Button Cell Battery (Wired Double Button Control)
I’m gonna make South Park’s “stop touching me Elmo” for my friend. he loves South Park.
That's awesome!! Thank you for taking the time to watch and comment!
Imma make my woody toy say “I put the new forgis on the jeep”
I am going to have so much fun with this
Wow! This is EXACTLY what I've been looking for all day. Question about using different speakers though, is there anything that needs to be thought about when getting a higher quality speaker?
Like do you need to alter the voltage, and is there a certain type of speaker I should look for that can give me a decent range as far as playback?
Also, I know you showed using an upgraded power source and speaker with the ISD1820, but what about upgrading one of the ones that you can directly upload your own sounds to?
Thanks!
Great questions. If you are trying to go big with speakers then you'll need an audio driver / power source but I've not needed to do that yet. I also use power packs to match the board requirements re volts. The other chip sets you can download to should do the same but if you double check the part specs from the seller you can get the precise limits. Hope that helps.
Awesome vid. Can i know how to make the sound play right after the power supply goes in without push any button.
Hi great video, would you be able to recommend a sound board that would have a enough memory to play several hours of auto at good quality. I would also need to include buttons with functions such as play/stop, next, previous almost like an mp3 player. Thanks.
Im making my Talking Lovelin doll from Tamagotchi! say "okeh", "deez nuts" and "OH BABY A TRIPLE OH YEAH" now.
I love the ideas coming in from this vid. Thanks so much for taking time to watch and post a comment!
Awesome Video and exactly what i was searching for. May i know if there is anyway i can have a higher volume output from the speakers?
Really useful information for me into creating my own stuff
You should totally take apart one of those mega stomp panic things. Be cool to change it up.
Amazing video. Thank for sharing so much. And I have a question could you please tell me what happen if I want to add sound into a book, and when I open each page, the different sound can be turned on automatically ? And when I close to open next page, the old sound will be turned off and the new sound of the next page will be turned on?
I understand if you're not able to answer this but I do have an inquiry.
I have a toy that moves, and I'm not able to replace the sound that's on the board inside it. I'm assuming that if I remove the speaker from the original board that will eliminate the problem of the original sound playing. So if I did that, and added as well a new board with a new sound, would there be a way for me to wire the new board up to the same button, so that the button both triggers the sound from the new board and the movement from the old board? I hope this makes sense >-
i still got a woody doll, i dont need it anymore but when i can change it what it says it would be a nice present for my next boyfriend, would be awesome ^^
Would use this to replace the Christmas songs on a singing Santa with like a Cannibal Corpse song just for the laughs.
Looking to add a sound file to a lightgun build. Out of all the sound recorders you tested, which one did you find had the fastest start to play once pushing the play button? The lag of some of these is unusable in this particular instance but I'm sure there's something out there that would work. Thanks!
Man that is a great question and to be honest, now I am a bit disappointed that I never considered tracking that. In total seriousness I do not know because I was too focused on quality of playback and volume. As best as I recall this chip had a response time similar to a soundboard on a cell phone.
BTW, love the idea with the sound file for a lightgun. Thank you for taking time to watch my video and post a comment. I really appreciate it!
have wanted to do something like that myself. there must be somewhere in China were you can get chips pre loaded with gun.laser.fart sounds.
I bet you are right. They put them into remote fart toys and stuff so someone has to be loading the sounds and selling them to end users.
@@DialedInDIY Tons of soundfonts out there. Went with a DFPlayer Mini MP3 Player. Uses a micro SD card but plays fast and doesn't need an Arduino or anything extra to function. Haven't installed it in the gun yet however all my testing leads me to think it will work great. It's also the one guys use in Star Wars blasters and light sabers so lots of info out there for it.
That was pretty informative. Thank guy
Thank you so much! I greatly appreciate the feedback.
Hi! Great and informative video! Can you share which voice recording sound playback module incorporates voice activation by keyword?
Great channel. I have been trying to figure out how I could hack my son's Baby Einstein Mini Magic Touch Piano and change the sounds. I essentially want to turn load drum machine sounds. Can you please make a video on this or direct me to where I could find information on how to make this happen!!!
Thank you so much for the kind words. I like the idea you have and I think there are several ways to do this that range from somewhat simple to more complex. On the more simple side you could change the connection to each of the keys to separate sound chips by connecting the button under the key to the trigger connection on the chip. To be more efficient you could work down the options of micro-controllers to program a sound to each key. I'm wondering if Arduino or Raspberry Pi could do this easily.
Great video. Anyway to add multiple sounds and have them play by selection???
Great question and yes... but it requires a different chip board. This one is designed for a single recording but there are others that will run sequences of recordings in order with each new push of the button. I'd love to hear how it turns out if you get a chance to come back with an update. Thank you for taking time to watch my video and post a comment. I really appreciate it!
What happens if i want to change a sound on a already made sound board
Very doable... I have used the soundboard from a "non-toy" to replace a toy sound board for more comical effect... but I was "asked" to switch it back. LOL
I hacked a talking pumpkin made by Gemmy. I'm going to use a circuit like this to make it come to life with my own recordings!
Wonderful video. I have a question though. What if I want a sound to play in loop as soon as I turn it on ? Thanks in advance
Great question. Some of the modules support repeat playback. It will say in the details section from the seller. Usually those will repeat up to a specific amount of time and then turn off. Hope that helps.
Ps.... thanks for the feedback.
Not sure if Light activated module is capable of connecting to pc, i really want to save a specific audio file on it that plays while you open a present :D, any thoughts?
I think what you are describing is very doable. The sound board would connect for audio download and a separate light module could be used for the trigger/switch action. Is that what you were working towards making work?
Do you have any ideas for a chip that fits in a woody doll that you can download mp4 files in?
I am not sure what size will fit that also lets you have multiple files run like the original board... at least not one that fits inside the case/box inside Woody. I've considered using similar boards attached to the original box but have not yet tried.
Got any suggestions for woody because I really wanna make a movie accurate voice box
I'm wondering how much work it'd be to switch out the recordings on educational toys for toddlers (with numbers, letters, animal/object names etc most often from Fisher-Price, ). Most only come in English, but I'd like to hack them to say those words in my language (very few toys, if any, speak my language). Any tips?
Is it possible to *upload* the sound file from the chip?
Was a very informative video but I'm still slightly confused. Basically I have a mini fridge that plays 3 different sounds when you open it but would I be able to reprogramme the sound chip to just play one track that I have on a file or would I have to replace the sound chip in order to programme it with a sound/track I want?
Great question. The answer depends on the chip on board. Most likely you will have to replace the sound board. I've yet to find one inside anything that can be reprogrammed unfortunately.
Also... sorry for the delay in reply.
@@DialedInDIY Hi, I recently decided to try give it another go and have opened up the compartment where the soundboard lies, if I sent you a picture of the soundboard would you be able to know if it needed a new board and potentially how I could create a module that plays a jingle?
I'm curious about whether it's possible to re-record a set of talking flash cards. I'd love to get a set for my grandson, but we're Australian and as you know, we have a very unique accent. I'd rather he didn't pick up an American accent
Hey I'm curious to know how those electronic floor mats work. Where you step on them and they play music or make other things happen. Do you think you can do a video where you take one of those apart and explain how it works?
Great project idea my friend!
Thank you very much! I've had allot of fun making everything from stuff for kids to prank projects. Hope you are having a great weekend!
I am making a Buzz Lightyear voice box and a woody voice box
So i wanted to do a pull string system with a custom sound. Can i find it on internet easily ? Or Can i turn the device you used to work with a pull string system?
The item I used in this video will do the sound and a pull string mechanism can be connected to it for the trigger/switch action. I'm guessing a pull string switch can be found on line (seems like everything can these days) but I have not searched before. If you find something that works for you I'd love to hear about it. Thanks for taking the time to watch my video and post a comment.
How much time is the memory of the recording and how many times can i play it again?
I want to mount at least 10 push buttons on a panel and when I push each button a different message plays and I can change the messages as needed,adjust volume etc. What device do you recommend I can use to accomplish this?
is it possible to make the sound pick up where it left off when it was deactivated ?
Do you mean having a longer recording that plays back for part of it and then when it is activated again it plays from where it last stopped? I am thinking that is what you mean and I do think there are some that do that. There are definitely modules that allow for multiple recordings and then they play back in sequence each time it is activated.
could leds be added to this.And better still, could it be linked to a microcontroller?
4:03 native American flute music to handmade baby mobile
Just curious, where can we learn more in-depth about chips, sound cards, tools, and etc? Any online resources?
Great question that i don't have a great answer for. I usually do a search for items and tutorials. Thanks so much for watching.
what is the variable power supply you are using?
If you got another woody doll you could give it movie accurate phrases Like his actual pull string sayings
Ah, I like that idea.... something more than "there's a snake in my boot." Thank you for taking time to watch my video and post your feedback. I really appreciate it! [So sorry for the delay... life kinda got in the way for a bit]
how do i change it if its already in the toy? for example, changing a skinned tickle me elmo from laughing to saying "i watch you while you sleep"
First of all... that sounds like an awesome idea! Most things like that have chip boards that cannot be re-recorded so you would have to do an Elmo Operation and change out the sound board.
Can you use this chip to play multiple sounds?
So cool, I love making small robots! And why I was finding this vid? Bcs I have fnaf plushies and I wanna add them voice :D
Thank you so much! I greatly appreciate the feedback. If you add voices to them I'd love to hear how it turned out for you. I think those should work great because there is plenty of room to work with inside.
I'm so very new to this but my son is a huge fan of Ghostbusters and I'd love to make him a proton pack for Halloween! Complete with activation and shooting sounds of course...where do I start? 😬
[So sorry for the delay... life kinda got in the way for a bit] This sounds like a really fun project. I think the first place to start is the design and size. Once you have that in mind you can decide what you have space to add in. Sounds like you will need lights (some form of LEDs), a sound chip, a speaker and a battery pack to run them all. Thanks for taking the time to watch my video and post a comment.
I am refurbishing a large framed backlit waterfall scene and want to add a waterfall sound track that plays when plugged in. I'm a novice so not sure how to go about it. Thanks for any advice.
Have you ever come across a solution with a pcb like these that when button is pressed plays a recorded message then allows user to record their own message and each time this occurs, a new, unique message file is created and stored. Kind of like the concept of a voicemail box but on a pcb so it can be put into a unique application?
Amazing, now i will try make a tf2 medic that wil laugh everytime i press him
Awesome! Thanks for watching and taking time to comment.
Can u do it with the USB type c amplifier board module change the voice when it says connected
what size battery did you end up using? Also how long can you record on it?
I've been using 3.7v Li-Ion batteries with great success. When the space is available I use the size 18650 since I salvage those from older battery packs. The seller indicates that they have a 10 second record / playback duration but I have found you actually get a few more seconds. Thanks so much for watching and taking the time to post a comment (sorry for the delayed response).
Sweet as a mango stretch
Is there a way to add a part for a Bluetooth so the sound can go to a Bluetooth speaker?
Hi
Want to understand possibilities to make a musical cigarette or candle lighter .
Please let know if it is possible and how
Thank you
Doesn't it actually need more current than a button cell can supply?
How many seconds does this module record??
can I have a sound board that has multipe sounds? like when you press the button it randomly plays a soud?
Time to turn my dinosaur mask into Godzilla
Can I add leds with this and have it same multiple things
Yes. That works as long as your batteries have enough for the total power needs.
Hello!, three sounds between same button??
The buttons have different playback features but run the same audio clip/sound (hope I gave you the answer you were looking for). Thank you for taking time to watch my video and post a comment. I really appreciate it!
Where do i buy the power supply
These were rated for 3v DC which means a button cell should have worked. I merely up-scaled to a 3.7v LiIon battery. The pack you see in the video is one that I made in a prior video which you can find here: th-cam.com/video/V6w1NZH-fLE/w-d-xo.html Hope that helps to answer your question. Thanks for watching and commenting!!
im thinking of trying something like this but i need to have at least 6 different phrases that it either plays randomly or in order (doesnt really matter which) is this possible?
Superb.
Thank you very much!
I want to change what is on a see n say how hard would that be?
Hey bro, i am new at this, i am really looking for how to be able of make those talking botton, i dont even speak the lenguaje but i could totaly undestend what you habe teach here. There are a posibily for you to teach us how to make those talking botton please?
Just what I needed! Subbed
I appreciate the feedback.Thanks for taking the time to watch my video , post a comment and giving a sub! Hope you like checking out some of my other videos too.
Hi, what kind of battery do I need? is a 9 v battery too much? what is the name of the one you use in the video? Thanks!
Which sound card or chip do i use to put pinball sounds in a cardboard pinball ?
I love to record and speakers
Thanks for taking time to watch my video and post a comment. I really appreciate it.
Thank you.
How can I change the sound in reverse tone device in my car?
Hi, not sure if you mean a back up warning tone or the whining sound that actually comes from the spur gears.
Hi i need help I just want to play one sound a few seconds long when the device is powered up
If you are wanting to add something like this to another device that you are powering up independently perhaps you can wire the button mechanism to the on/off switch of the device. If the device you are connecting it to is the source of power for this chip set then it is probably even easier. Just make sure the power from device is compatible with power the chip set needs. Hope that makes sense.
@@DialedInDIY that helps I’ll def need a voltage reducer but I need a way to bypass the button so it plays when voltage is supplied all I need to do is get it to play when I start my car
I’m trying to find a way to modify my cat’s Fluentpet buttons. They’re so dang quiet and run out of batteries so fast!
Can you see if you can on fingerlings?
Just want to make sure I understand the Q... do you mean see if one of these would fit in a fingerlings? If that is the question then I think it would need a smaller device. The speaker and chip would not fit inside. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@@DialedInDIY its somewhat close. So basically what I mean is if it's possible to do this but with a toy like fingerlings, untamed or grimlings if that make sense. I wanna know since I wanna make a custom fingerlings using so knockoff one and replace the sounds to fit the animal. Also if possible could you do a video on it?
Cool!
Thank you very much!
FYI, this is the perfect example of a comment that I did not receive a notification for (I saw this when I came to reply to the other comment).
is there a way to get ones that can play multiple lines?
hey i was wondering if there are chips like this that could record 3-5mins of audio? because i saw on the description that this can only record up to 10secs :((
There are chips that can record much longer clips... the price point starts to go up quick though. I think one of the items I noted in the description was a greeting card type of chip that can record for much longer. [So sorry for the delay... life kinda got in the way for a bit]
@@DialedInDIY I saw one on Amazon that plays for 7200 (or some such unbelieveable amount) seconds
Hi. I'm getting ready to start making creepy dolls for Halloween. I need them to be sound, light or motion activated and most importantly, be able to randomize several recordings. So, a doll that says 5 things, one each time it is activated, then says another thing the next time it is activated. Is there something already available for that?
Where can i get these wires?
Hi sir,I have idea to Start Voice plush toy business.so, Where I can purchase raw Material like voice chip and modules in wholesale.
Great question and sorry that I can't answer. I buy in smaller quantities on line when I need these types of things.
How can I install different music/recording to the chip?
I am new and from NORWAY wath is the name to the red and blach wier from and in to the speaker
😎
How did you record? Where is the microphone ???
Great question... it is built into the board. For a point of reference, if you look at roughly the 1 minute mark of the video you can see a round, black spot in the top left corner. That is the microphone. Thank you for taking the time to post a comment/question!
Is there a way to do this but have multiple messages, each one activated by a different switch? For example, if I wanted to put it in a stuff animal and have one message in the arm, one in the leg and one in the stomach but only one chip.
Absolutely!.. there are versions made that have these kind of options built in. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@@DialedInDIY Thanks, do you have any recommendations for one that has, one board, with batteries, microphone, and speakers, but that can record multiple messages each one being activated by a different switch.
@@shoshannahnewman2071 I have not used one yet but I have seen several like that on Amazon and other sites. Sorry I dont have a specific one that I can recommend.
Hello, I was hoping you could help me with something regarding a sound thing like this. I had a box that when opened would play a song but when I put in a battery one day the battery exploded and the metal parts that hold the battery on place fell off. Is it possible to fix it or would it be better if I bought another sound module thing?
Depending upon how much damage was done to the other parts it could totally be fixable. If the battery left chemicals inside then you need to see if it can be safely cleaned up (which also depends on the type of battery). My guess is that the metal parts that came out slip into a section where they can actually be put back. If that is the case then it is simply a matter of making sure the metal contacts/touches the spots needed between the battery and the wires.
I have this happen on old items that batteries were left inside for far too long. Usually I can just put parts back, clean the corrosion off with some sandpaper and get everything working again.
@@DialedInDIY thank you much for replying. I ended up taking it to a repair man and it thankfully works 😊
@@ishahakeem So glad that it worked out and glad that you were able to find someone who could do the repair.
Would you pretty please do an original 1990s furby?
That would be fun... but first I'd have to find one. [So sorry for the delay... life kinda got in the way for a bit]
Can you re record on Jurassic park speaker boxes
I can turn a My Buddy doll into Chucky. Lol
Would you happen to know the name of the one at 4:53?
I'm pretty sure (but not positive) that it is Voice Module, 30s Recordable Music Sound Voice Module Chip 0.5W with Button Cell Battery (Wired Double Button Control) -- listed in the description with a link.
😭😭❤️❤️i was searching for the EXACT THING .. this speaker i have is so fucking annoying
If the video was able to help in some way I am very glad to hear it... thanks for your feedback. I appreciate you watching and taking time to post your question.
I am making a stuffed toy of Mr Noseybonk and i am wanting to put a sound maker in it ti play the song 'A hippo Named Hubbard' this will hopefully help.
Got the first reference but falling short on the second. Hope all goes well. Thanks for watching and taking time to comment.
@@DialedInDIY thanks. Sorry i meant a 'hippo called hubert' thats the mr noseybonk theme music sort of.
I love it... that is perfect. I found a YT video that had a link in the description ti diwnload the wave file; th-cam.com/video/7T7CTyjJP2Q/w-d-xo.html
I'd make Woody as offensive as possible and sneak it into a kids store 😈
Now your talking. Creativity can be so fun, can't it (LOL)?
Change sounds on a Fisher Price controller with Halo sounds
Love that idea!
Or simply, use redstone
Your videos are great!!
Thank you very much. I really appreciate you taking time to watch my video and post a comment. Hope you have a great New Year!!