The Old Chief Special on the Hip
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- Sometimes you just have to go back to the original classics…
On Choice of a Defensive Firearm: Choose the firearm that meets YOUR defensive needs and is legal for your state or local jurisdiction. Just because I like revolvers for concealed carry doesn’t mean you have to too. Become your own best trainer.
You can contact Greg at Lionquestfitness@gmail.com
According to the Bible - we are to live at peace with all men as much as it is possible.
Personal defense of one’s self and of others is a last resort when there is no other option.
Self Defense Continuum - Avoid, Escape, De-escalate if possible, and if all else fails - RESIST
DISCLAIMER: All state and local laws were followed in making this video. Jeff Cooper’s rules of firearms safety were followed. Ear protection was worn. Firearms were cleared of ammunition when holding and exhibiting them.
These videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RESPONSIBILITY AND ACCOUNTABILITY. These videos are intended for lawful firearm owners who comply with federal, state, and municipal laws of the jurisdiction in which they live. Any opinions stated by the creator are the creator's alone and are not that of any representative body or of TH-cam. TH-cam and the creator are not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. The creator does not endorse any specific products and this video is not an attempt to sell you a good or service. The creator is not a firearm store and DOES NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. The creator DOES NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
You are 100% correct when you say “you can’t beat a vintage Smith & Wesson.” Thanks for another great video.
I own a chiefs special in 3 inch from 1971
I bought about 20 semi autos, then found out I'm a revolver guy! Got 3 o4 revolvers so far...picking up my 686 Plus today!!
Good, rugged choice!
I have had two Chief Specials so far. One a model 36, the other a model 60. Both in 38spl. They were great guns. I wish I still had the model 60.
S&W J frame .38s have stopped many a rapscallion. And remember as Myamoto Musashi said "when you leave your gate, act as though the enemy is in sight."
A definite survival skill.
@@LionquestFitness Those strikes you did remind me of the old John McSweeney big cat paw he used to do. God rest his soul.
There is nothing wrong with a Chief Special, and a lot right with them. The older Smiths are made extremely well and the triggers....wonderful. Back decades ago, Smith triggers were known to be some of the best, easiest, smoothest. For j-frame pocket carry, I took a piece of unfinished leather and made one. I am not the best hand stitcher, but it works. Summertime Is so hot. I will wear shorts when I can, and a j-frame carries easily in the pocket.
"I'm your Huckleberry." That's a great pistol.
Once again Greg a great video. I have a M60-2. I will carry it in a pocket holster or DeSantis mini scabbard outside the waistband. I have been watching some of the old Hawaii Five-0 shows and the flat latch Chiefs Special is a classic. It’s something I would like to have if it fit my budget. Don’t need it. I priced some .357 Winchester the other day it was $26 for a box of 50. The guns S&W are putting out these days don’t stack up compared to the old ones.
That is definitely for sure. They are stronger, but not as finely crafted.
This guy is great. Straight outta 1964 and I respect that.
It’s interesting how .38 Special Heritages are moving that fast. Don’t hear that in the gun media. I love your J-frames and have always appreciated the three inches since my dad carried two of them in the 70s.
There is something about a classic small frame revolver, and at the price the Roscoes were going, it was a quick sale. But, caveat emptor. Word is still not out on the quality of the Roscoes.
👍 center mass, that’s what we’re looking for. Good looking revolver.
Shot placement is still the key.
Great vidio sir love those revolvers thank you for sharing and good to hear Mr. Holsters name
@@lessage760 Long live Mr. Holster's legacy.
@@tylermorrison7051 amen I miss him on Saturday mornings
Greg, you are luring me to the dark side. I’ve carried a 1911 for about 45 years, but my wife loves her J-frame centennials (especially the airweight for carry). She carried a Model 66 on duty in the mid 90’s. I’m 70 now, and wanted something light and handy around our rural home in summer. Bought a Model 638; it’s in my pocket now. Love it. Might even go for one of Lipsey’s Ultimate Carry guns. We also have a 30 year old 2-1/4” Taurus 605. These little revolvers grow on you 😉 Our Diamondback mostly lives in the safe, but I wouldn’t mind an old Detective Special or Cobra.👍
@lanedexter6303 Have you seen the King Cobra and Kimber K6S? There are plenty of nice-looking revolvers to choose from.
@@tylermorrison7051 I have been hearing about the King Cobra, even wondered if the King Cobra Target is comparable to my 4 inch Diamondback for size. Gotta find a Kimber to look at. I’ve had their Pro Carry 1911 for decades. 👍
🐍 I have a new model Cobra .38... I never thought I'd ever get another snub nose, but I'm glad I did; it's by far one of the most accurate revolvers I own!
@@carlosmorris4510 Hmmm - that's something I might need to look into.
I have a Colt Detective 3 inch made in 1969. It’s a beauty. I also sometimes carry a Smith 30-1 in a shoulder holster. Both 6 shots. I usually carry an auto loader or a Rhino. But, there is something really special about the vintage revolvers. Its easy to understand why small revolvers were so popular and remain so to this day. Besides very small 22s or 25 auto loaders, nothing is so easy to carry.
Greg, thanks for showcasing this fine vintage weapon. As you know, I'm a wheel gun type, and have a particular fondness for older ones. Your Rosie is a dandy! A weapon with a little mileage on it just means its been down a few roads, but it rides just as good. 😉
Especially one of those old Smiths.
Thanks for the videos, have a blessed and safe week. Dano
You too Buddy! Stay safe out there.
Love the Older Smith & Wesson Snub Nose Revolvers Owned a few model 36"s and alas they are but Menories, Now I carry a Charter Arms Ultra Lite 38spl..nice examples Cheers!!
This coming year I'm going to be working some with Charter revolvers. I've neglected them too long.
Rapscallions?....a long time (1970+/-?) since I heard my great aunt refer to us nephews as such! Another great one, Greg! It feels so good to see those old S&Ws as the stars of your video once again!
A vintage steel-frame J-Frame with a Tyler T-Grip is a surprisingly comfortable and nice package. I normally don't care for wood grips, but a grip adapter does wonders. I put a T-Grip (clone) on my mom's S&W 30-1, and while she doesn't like it, I think it's perfect. .32 S&W Long barely has any recoil, even shooting Buffalo Bore ammo.
I've found that the BK grips while not as aesthetically pleasing as the Tylers, but being of a polymer material, are more grip friendly.
I love chiefs specials. J frame that started it all! Great shooters, they tend to work even after yeaes of ware and use. Still shoot point of aim in most cases. Great little revolvers. I love them 🇺🇸 s&w or anyone who makes good little wheel guns! Cheers greg nice shooting. I just hit the range today and all the training pays off I am happy with how it went 🎯🇺🇸🦅❤️💙❤️ happy belated 4th
Great video Greg love the old chief Revolvers
Thank you Greg. I'm always on the lookout for a vintage 2" Chief Special. I often carry a 1972 Series 2 Colt Dectective Special in an upside down vertical shoulder holster. The holster is not as practical and hip carry, but it's nostalgic and comfortable.
@@michael_alan I missed getting one a few years ago. I talked myself out of it, Joe P asked me what the heck was I thinking, and the next day I went to get only to find it had been sold an hour earlier. 🥺
My edc is a Hellcat, but I've owned J frames for four decades and always will.
Great video Greg!! Nice looking cheif!!
That's a great addition to the collection, Greg! I'm watching for a Roscoe myself. No luck yet. Excellent shooting as always!
I'll wait to get your impression Marc. I'm going to start looking into Charter Arms snubs next.
Good stuff ! I bought a used S&W Model 49 around 1980. Still use it. Never failed, excellent accuracy, shoots to point of aim. They made excellent revolvers !
Oh you neutralized the assailant alright!!!
Love that 60s revolver and gonna look up those holsters for my little pistola.
You can't go wrong with Simply Rugged holsters.
I own an M60 Chiefs Special from 1977, which a collector had stored in his safe for over forty years without firing it. He also had one from 1967, but I didn’t like it as much because the hammer and trigger were blued. I suspect that S&W still had parts left over from the Model 36 - in the 1960s, the demand for the stainless steel version was very high, and as far as I know, these revolvers were initially delivered primarily to law enforcement agencies. I like the revolver, but I’ve only shot it a little since I bought it. I recently got a few boxes of ammunition in different loads to see which works best with the fixed sights, as I want to include it in my regular training.
Nice find.
Rosie looks to be a sweet shooter Greg. Thanks for sharing. God bless, Rob
Wise choice with Rosie. The Smith's from that era are the finest. As a collector of same type of Smiths, I have the same dilemma: if you find a nice looking one, you never want to carry it for fear if you have to use it, you will lose it. One that is mechanically functional yet a little on the worn side is the way to go, way better a carry gun than any of the modern revolvers, bar none.
100%!
Good work on those rapscallions.
They are great with sour cream and butter on a baked potato! 😜
I have found "Metal Glow" works real good on polishing up nickel finishes. even stainless steel. love the old J frames. they don't get in the way if you want to throw a kick and have a good number of them, and I don't think I have enough. I have an old square butt blued Chiefs Special from 1962 that finds my pocket often. but also like my 1976 Chiefs Special M60 stainless for the summertime. I have both the 642 and the 442. and if I was you I would go back and get that 442. if you can't find metal glow than use fritz ( flitz, I forget which one it's called). thanks for sharing Greg.
Thanks for the input Glen.
Happy 4th my friend! Always nice to learn new blocks and blows then the draw. We had a sick 4th holiday. On the.mend. hey they can always renickle a gun.
Hi Jeff! I'm going to look into getting it refinished.
@@LionquestFitness Its a beaut now. I have a nickel plated old colt lawman in about 98 percent condition. always preferred the cylinder release of the smith or rugers though. Have a nice nickel plated smith model 59 to pair with my former service blued model. the nickel plated one is at lease 95 percent. these are works of art in todays mass produced plastic handguns. that being said i still prefer me beretta 92 or glock 19 if i had to put one in a chest rig ready for you know what but my revolvers still are carried daily.
@@jeffpaul8260 Nice!
Congrats on your new to you Chief's Special Greg. And thanks for sharing her with us. I love my old S&W hand ejectors.
You and me both!
Hi Greg, something old doesn't mean it's useless. Great video thanks for all your hard work Sir!
Thanks Terry!
Hi Greg. I was born in 1962. A good year for men and guns. We are “vintage” guys. I’d say more “new vintage” than “real vintage” (for me the first half of the previous century). You shoot very well with 2” revolvers. I need longer tubes to hit the targets. God Bless. Happy Trails to You.
Thanks Amigo.
Nicely done.
I have my model 60 from the 70's that I carry to this day.
I added a laser grip which helps.
Also have my Dad's 60.
Good job, thank you. I sure miss Mr. Holster.
Me and you both. He was wise and humorous man.
Thanks for sharing Greg, great video! You are absolutely right about a vintage S&W, you gave Rosie a good home and she will give excellent service for several more generations!
Before I pass this veil I'll see about getting her re-nickeled to pass on to one of my grandchildren.
Sometimes the old things are just cooler!
Fabulous find, Greg!
Great video
Hi Greg, this empty hands - shooting transition was so smooth it could be in an action movie like LA Confidential.
I've never understood why most firearms instructors never integrate movement, empty hand skills and transitions. However, on another level, I understand because of safety considerations in group training. Flow takes practice and coordination.
You made the right choice when you got Rosie.I'd rather have a classic than 98% of these new modern revolvers.I almost bought a Roscoe from Bud's a few weeks ago but I started to wonder,,since it has the Heritage name on it,,if it was made of the cheaper metal alloy (pot metal) like most of their revolvers.So until I find out for sure I'm going to hold off.
Hi garageguy! The Roscoe is a steel frame and is +P rated. I'm still looking for one...
@@garageguy879 Give them time. I'm sure there will be more.
@@marcthomas2482 Hey Marc,,thanks for the info.
Hi Mark! Sometimes it is better to wait. Rightly or wrongly I feel like I got burned on the new Rossi M63 with a similar marketing strategy from Taurus. Big push, and limited run under a secondary division. The Roscoes are made in Brazil, but are they using Taurus designs and machinery or Rossi? Personally, I'd prefer Taurus design. Also what is the warranty? Heritage and Rossi are only good for a year.
Greg, I think you're being a little harsh calling Rosie "beat up" and "an old beater". I would maybe go with "in carry condition" or "well carried and worn", you're gonna hurt Rosie's feelings. I think she's a great acquisition. Far better than the Roscoe or a new 442. A well worn classic is still a classic. Who knows, you may have Rosie re-plated/dipped some day. Like getting her a face lift or some imp......well, you know what I mean.😂
Yep, I definitely concur on the 442 or the Roscoe, and eventually I my get her replated.
I’d say that’s a pretty good consolation prize! I’ve been carrying a J Frame chambered in .32 H&R Magnum a lot lately.
Love that Simply Rugged holster my friend. That’s what I’m wearing right now. Only mine is black!
I think I would up with the better end of the deal.
Perhaps.
@@thealsatian4232 A True Texan. A man of few words.
👍👍Thanks Greg…..love that revolver. Hope you had a great Independence Day.
It was great, and great to live in this country!
Another great video. Thanks.
Thanks for watching!
Good afternoon Greg. Beautiful Revolver. Just don’t make them like that anymore. Enjoy the video my friend.👍👍👍👍👍👍🎯🎯🎯🎯🤜
Yep Al, they definitely don't make them like that anymore. I have zero interest in the overpriced S&W "Classic" Model 36. But let me run across another no dash or dash 1 and I'll pick it up in a heartbeat.
The Roscoe revolvers seem to have disappeared everywhere. I have a Model 60 no dash, with Pachmayr rubber grips. Great Video, Greg! 💥💥💥
Love my c.1969 model 60 also !!!!
@@hdrvmansame here 👍👍
Yeah haven't seen a Roscoe
@@frankbutta9344 yup, picked up a Mod 60 no dash a few years ago in a pawn shop...those bulbarous old style Pachmayr grips stood out in the display case like a sore thumb, LOL...
Modern J frame grips are more concealable, but these Pachmayrs have obviously been on this one for decades & they just fit the whole old school early 70's vibe...
& it'd be sacrilege to carry it in anything other than a vintage leather holster...
Sure wish I could find someone who makes the shoulder holster Steve McQueen wore in Bullitt....
@@jeffanon1772Very cool, Bullitt was a great movie.
Good stuff!👍🏻
Thanks amigo!
Nobody fights an inaginary foe like Grambo! Nobody! I'm sure Les will be along soon to admonish you for not wearing a bandana. I shouldn't encourage him. 😂 On a side note, that's a fine looking revolver. I still want a j-frame with a t-grip.
Many years ago I read Gichin Kunakoshi's, the founder of Shotokan Karate, autobiography. He spoke of practicing kata with your opponent in your minds eye. In years gone by of sparring, grappling, restraint situations and real fights, I try to picture what could happen and how human beings attack and move. I may not ever master visualization, but it has definitely created a mind/body connection that has saved me at times from dangerous situations, accidents and falls.
HI Tyler... good point mate.
I saw Grambo over at Al"s site... yep it was the Henry 357 review... (I'm sure he can smell any revolver review, when they are posted😊)
Greg stated his shot good... Grambo would have mentioned the effects of wearing a bandanna... But I think he isn't giving all his secrets away until he opens the Grambo Academy of Refined Gentlemen.
Hope you had a great 4th July 🎉
@@LionquestFitness Sounds solid to me.
@@lesgillard985 I'm sure Greg will share these secrets when he is ready. 😉
As you know Greg my EDC has been a J Frame since 1968 but regular range time is a must. I carry mine up the same way, factory style grips w/a Tyler TGrip. Good shootin’ sir, hope all is well w/you.
@@oldcop18 Thank you my friend!
Good find Greg. If it runs well, looks are secondary to me if the value is there. I appreciate any of those you shared and have been thinking it might not be bad to carry a Model 15 even with 4 inch barrel since it shoots very well for me. Thanks for teaching us about those darn rapscallions, lol.
Thanks Robert!
I have been wondering roughly where you were from, Sir. I figured somewhere between South of Greenville, Columbia and Augusta and just heard Pickens!
Hello from a Wofford Grad stuck in northern NY for work!
Poor you!
It's not that often when you pull out a gun that is considerably older than I am. Or at least older! LOL.
I'll take the scratches, dings, worn finishes that works flawlessly and reasonable accuracy. the firearms I regularly use gets are the same way .plus at a good price for them as I'm retired watching for what I buy, I'll take used quality every time .a thug laying on the pavement bleeding out won't care if he is dying from a pretty firearm or not. papa wishing you well 😊
Thank you very much for this video. You have very nice revolvers.
Hi Marie! There is just something about wheels and steel.
@@LionquestFitness absolutely!
Rosies' Milky Nickle finish will clear up to like new in about 1 minute if you use some Mother's Mag & Aluminum Polish from the Auto Parts store. Just use a soft terry cloth and gently rub in little circles.
Enjoy.
Love your program.
I have some time this afternoon. I think I'll try that. Thanks for the tip.
@@LionquestFitness Do and post a video of the Polishing if you have time. It would make a huge difference for a lot of people. I don't have TH-cam channel that I ca demonstrate on.
@@douglaslarue4264 I'll see if I can. I went online and reviews were mixed, but Mother's Mag seemed to be the preferential polishing compound for nickel. I got tied up with yard work today, but I'll go in the morning and pick some up.
@@LionquestFitness Sounds good. Looking forward to the results.
Nice pistols! I'm not a fan of nickel finishes because when they wear out they look dreadful. Though back in the day I understand there weren't many other corrosion resistant options. Plus there are companies that can redo a worn out nickel finish.
I think there's a solid tactical value for a civilian carrying a super shiny gun if it's small. A super shiny small gun that, once drawn, calls attention to itself and a defender's intent can be a useful deterrence. As opposed to a simple small dull colored gun that might be mistaken for a wallet or cell phone in dim light.
Realistically, a nickel or stainless gun looks bigger and more intimidating, especially in shadows or darkness, which could be a psychological advantage. As for finishes, a worn blue finish has character. A worn nickel finish is a worn nickel finish.
Thanks for the video
Hey Chief, good to see you!
I put mine in my pocket every time I go to the store..
I believe you went the right direction with your purchase Sir! Better a sure bet than a gamble....Is it just me or do the nickel Smiths seem to ( usually) have very slick actions!? I'm a county away and don't know these honey holes ( gun shops) where you get these deals!
I don't know on the actions being slicker on the nickel plated guns. In general, older S&W's have very smooth actions.
Nice old revolver Greg. Off topic I picked up a Rossi 877 and was wondering does it fit a k frame holster? Or a j-frame holster? If you would happen to know I would appreciate it.
Simply Rugged can make a holster for it regardless.
I want to say that the one I had fit in the same holsters my Taurus 856 and 605 fit in.
Thought I had found the ultimate Smith, the Model 617 with 10 rounds of .22 LR. They wanted about a grand for it after taxes. Then I started reading the reviews on it. "Light primer strikes in double action". If you're going to charge that much for a revolver you need to make one that works.
Unfortunately QC isn't always what it should be with S&W revolvers these days.
I've got a crush on yoyr Rosie there Lefty......I carry my Chief Special now religiously for about 2 years. But She's a CS9 wearing night sights and a "blued" cerakote
Rosie is pretty gorgeous for being "beat up. "
Carlita. For use against well dressed rapscallions.😉
I carry a S&W M&P Bodyguard .38 with a Houge Grip. I keep Federal Punch 120 grain +P JHP in it. I've never had to pull or fire it and I hope I never have to. I prefer a revolver anyway, that's just me.
Where did you get the pocket holster from? Good video!
It is a Galco. I'm not sure if they are still making them.
Great video, as always. The vintage guns are best, as are the vintage shooters. Just imagine how good you could've done with a Charter Arms Undercover. 😛
I went to 12 Mile Defense Friday. First, I went by the ATM to get $200. I walked in as they were doing the background check for someone to buy that Undercover. Oh well. At least Ky Gun Company has a wide selection of new Charter Arms. Right now I'm considering a concealed hammer Mag Pug as a starter.
@@LionquestFitness You snooze, you loose. You snost and lost. There'll be more.
@@matthewrobinson4323 The worst was the Colt Detective Special I missed because I tried to talk myself out of buying it. I missed it by two hours.
@@LionquestFitness So it would seem you successfully talked yourself out of it.
I have the 442 and a few vintage S&W model 36's. I will favor the old Smiths any time.
Me and you both Edward!
I really like the Tyler T grip , do they still make them? I’ve only seen used ones on eBay
I don't think they make them anymore. BK grips are similar, but made from polymer.
Old Smiths are far better made than new ones.
I'd agree with that. Other than the ability to handle hotter ammunition, the level of fitting and workmanship is no longer the same.
I carry, and have been carrying, a S&W .38 Bodyguard in all its variants (638, 38, 49) for 30 years, with one or two reloads, on and off duty, and never felt "under-gunned".
Do you have plans to make a video on that Ruger security 9 compact that you have?
I do. I need to spend a little more time working with it, and I need to get a holster for it, but so far it has proved a very accurate, point and shoot gun. Plus, I just like the profile. For a semi-auto it is a sleek looking gun. The only drawback, and this is something that needs discussion as to what extent, but according to the manual, it is not drop safe. That is puzzling to me that a gun made in 2024 is that way.
To be totally honest, I did not think I would like this channel (no offense). BUT, you are very knowledgeable and interesting and I am starting to like & respect smaller, but REAL (not AI generated) gun channels. Nice work!
@@dhc4186 Me personally I can't stand AI generated content. Thank you for watching.
Seems you’d want to take the closer guy out first, what’s your thoughts on this?
Great video man!
I’m just guessing here, but based solely on the targets, the one farther away is shown holding a gun, while the closer one isn’t currently armed. The suspect with the gun is more dangerous even though he’s farther away
Studying predatory behaviors, the front man is usually the most aggressive and willing to commit to harm, whereas two or three are flankers to act as support and finish the kill; not unlike predators in nature.
@@BrokenBarBox True, but being further away, in the scenario, the gun is not identified at first; whereas predator 1 is attempting a bludgeon attack.
@@BrokenBarBoxGood point
Please keep trying to pick up a Roscoe. I have both and love them. They are great values and I am interested in your opinion on them.
I'm interested in your experience with them.
@@LionquestFitness
I bought the two inch first. I went to the range with a Smith and Wesson 442 running the 442 first then the Roscoe the Roscoe shot to the same point of aim as the 442 at about 15, 20, and 25 feet. I also did a lot of dry firing with snap caps. Both Roscoe’s have decent smooth triggers. I have about 300 rounds through each. For what I paid for each I’m impressed. The bluing is very nice on both. They are fun to shoot with regular .38. I haven’t shot much +P ammo through them yet but will down the road. I bought them for fun but after shooting them a while I would carry them if needed. By the way, I have xxl hands and I thought the wooden grip would be too small. I have a S&W 36 and needed a Tyler T Grip for it. I was suprised that the grip actually worked well for me. No T Grip necessary. The few reviews I’ve seen mention that ejecting shells usually leaves two stuck due to the grips which I’ve found to be true. A quick flick of the cylinder gets them out easy. Same speed loader for the J frames works well, only sticking about half as much as it does on my 442.
Bom dia e bom domingo aqui do Brasil meu amigo americano. Magníficas armas, o Sr tem realmente um bom gosto, Deus abençoe a liberdade que os americanos tem em adquirir armas, aqui no Brasil é muito difícil,nossas leis com este governo pioraram mais ainda, mas, quem sabe um dia isso mude. Rezo para que os americanos deem muito valor a isso e estejam sempre alertas com os governantes desarmamentistas . Obrigado pelo vídeo,uma ótima semana e que Deus abençoe as Américas 🇧🇷🤝🇺🇲🙏🏻
Palavras sábias para os americanos prestarem atenção. Tenha um domingo abençoado meu amigo!
@@LionquestFitness 🙏🏻
..a month ago I found a nickel M&P ..apparently from the early 50s,factory engraved with "Detroit Police" and what appears to be a 4 digit badge number on the backstrap..I sent a request for a Factory letter last week..we'll see what this is...
Let me know. That is an interesting find.
..a six round K frame w/a 2 in bbl...
Not sure about all the block stuff but hip shooting is essential. I learned decades ago to hip shoot cans at 10' I do like to distinguish between hip shooting and point shooting. Point shooting is a bit more accurate at longer ranges and is now embraced by the gun game guys. Why learn to hip or point shoot? cause as the gun game guys are finding out (finally) it is WAY faster. Fast is life but accurate is the thing. what I carry the most is a 340 PD .357 J frame at 12 ounces. yeah... it kicks really really hard. who cares? I can practice with any J frame. guess what? ALL j frames shoot exactly the same. shoot one you have shot em all. They are amazingly well regulated. I doubt I have put 400 rounds through the beast 340 PD just enough to see it shoots like any other J frame. I carry it in a hip pocket sticky holster and use wood SS grips. Sometimes I throw it in a front pocket of a jacket. I have no qualms about shooting through the pocket... yeah... ruin the coat but... I got a lot of coats.
Check out some of my snub content. I've got a lot on hip shooting and point shooting.
We were you shooting your targets in that order? It seems backwards.
You're assuming the gun was visible at the time the first attacker struck.
Long story short ..2 DECEASED RAPSCALLIONS 😊
😅
@@LionquestFitness I’ll be honest, I had to look up what a rapscallion was lol.
@@MidwayShooter 😅Ner do wells, scalawags, persons with ill intent, thugs, pugs and mugs!
@@LionquestFitness I call them shit bags 💩
3 days ago on active self protection an argentine former soldier used a 5 shot j frame to successfully defend vs 2 car jackers + a 3rd get away driver.. all on video! J frames still 100% still have a place as gregs video and this one show, link:
th-cam.com/video/IBScE71C2uQ/w-d-xo.htmlsi=CgHtrj1Gh3qKWVz5
@@jackgreenstalk777 I saw that. Very impressive.
Why shucks I'de rather have two old vintage Smith & Wesson's any day over the new revolvers for they seem to match my old ass and that's what we have in common and they don't cost as much sometimes depending on condition !!!
Well, once upon a time while debating between a Model 66-2 Combat Magnum, a modern S&W Combat Magnum, and a new Colt King Cobra; all within a $50-80 dollar price range difference, I opted for the old and used S&W, and have never regretted it.
@@LionquestFitness I want a near mint 36 3in. barrel so bad that it will have to be my bucket list gun and I know it'll cost me some Benjamins no doubt !!!
👍👍🧨🧨😎
Do you shoot plus p’s in those old girls?
It depends. In small amounts, as in five or six on a range trip and for carry, it shouldn't hurt the gun. Hornady Critical Defense is very soft shooting in these older guns. On the other hand I'd shy away from some of the hotter loadings from Buffalo Bore and Underwood.
Great video