@@stanzajchowski4250 so after it reads your trouble code go to power train then all the way on the bottom should be special functions your should be able to reset there
No and yes I just had it go back into limp mode about a week ago but again was able to reset the vlp counter 15 min later like nothing happened, have to dig deeper since the trans is a new remanufactured can't figure out why it did it again
@@walg4344let me know if you ever find out. I’m having the same p1745 code on my 08 Ram 1500 with the 42RLE transmission. I’m on my 3rd transmission with this same code. I went to a new transmission shop and the owner suggested that I may have a bad PCM, if all 3 transmissions had the same code. 🤔
@@walg4344 never bro, I did it. I had to get the transmission to operating temperature. So I drove for about 15 minutes at regular speed. Then reset it.
So the scanner did fix it but, the code got triggered again and went back into limp mode about 3 months later from what I have researched it might be a wire harness issue maybe a ground haven’t tried to fix issue just keep resetting the counter hope this helps if I fjnd the solution I’ll video it and post it hope this helps
Wow worked like a charm!!!I did on my dodge caravan and took 30 seconds....I THANK YOU LOT.
BEST$150.00 I EVER SPENT
2010 jeep wrangler Just what the doctor ordered. 10 minutes instead of 15😊lol
You mentioned a cheaper alternative to this scanner that would reset the VLP counters. Which model Foxwell were you referring to?
Thanks for this informative video. Would you please leave a link so I can purchase this scanner?
Thanks
After seeing you I ordered that scanner but don't know how to clear that vlp, have same jeep wrangler problem
@@stanzajchowski4250 it should be in the special function all the way on the bottom
@@stanzajchowski4250 so after it reads your trouble code go to power train then all the way on the bottom should be special functions your should be able to reset there
I have the same scanner and same truck but my special functions do not show vlp counter anything
Thankyou for this video,very helpful
Would this scanner also work with the 62te to clear P1745
Can you send more detail instructions on how to clear the code I did it but the car is still not shifting gears stuck on loop
You can’t just clear the code you have to reset the vlp shift counter
Can I reset it with the same tool?
I am having that same problem
Is it still good today?
No and yes I just had it go back into limp mode about a week ago but again was able to reset the vlp counter 15 min later like nothing happened, have to dig deeper since the trans is a new remanufactured can't figure out why it did it again
@@walg4344let me know if you ever find out. I’m having the same p1745 code on my 08 Ram 1500 with the 42RLE transmission. I’m on my 3rd transmission with this same code. I went to a new transmission shop and the owner suggested that I may have a bad PCM, if all 3 transmissions had the same code. 🤔
What's the name 0f the scanner
OBD2 Scanner, All System Code... www.amazon.com/dp/B0BJPDGZ86?ref=ppx_pop_mob_ap_share
Dude how long does it take to reset the p1745? I have a foxwell n1710 and its just on “please wait” for so long
It depends with my scanner I can reset it in 15 min
@@walg4344 never bro, I did it. I had to get the transmission to operating temperature. So I drove for about 15 minutes at regular speed. Then reset it.
@@NycForgiatodid it fix the problem ? Before I buy this machine
Trying to get a cheaper option
Engine light was still on cant tell if it actually worked
So the scanner did fix it but, the code got triggered again and went back into limp mode about 3 months later from what I have researched it might be a wire harness issue maybe a ground haven’t tried to fix issue just keep resetting the counter hope this helps if I fjnd the solution I’ll video it and post it hope this helps