So i did the corolla 2000 with mini prog today (my first one) and even though it wasnt exactly like your video, your video was a super good introduction of how it works.. Couldnt achieved it without your video, thanks alot!
Yes this is the best way. No writing back to the ecu. I usually read the key IDs then generate a 4C chip and change the ID to one of the existing keys. This is a different technique of doing the same thing.
Hi. I don't understand how do you know that it didn't read the memory with some error? something similar to when you make a bad clamping. That xhorse portable reader has some kind of error checker in the reading?. thanks for your time
Great video. I am somewhat familiar with an ar32 reader, for anyone that is familiar with that tool. Has anyone been able to ise the eeprom file dump from a similar ecu or honda immobilizer to clone a key with the toolmax?
I am not sure, but you can check in this following book to see which chip you need to read legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Interesting, in most countries it’s like that only the US does not require that by law it’s optional. We have 2020 year models that does not have any transponders.
Just so the people are well informed, this is not a reflash he performed. The programming procedures for a reflash are not the same as this. A clone out is what he performed, and that is the easiest way to complete the task. To correctly do a reflash, you must flash an 8 - or 16-bit virginize file depending on ymm . Once that is done, you must learn the minimum requirement of keys for programming mode to exit. That is a proper reflash. Good video, though, explaining the basics of eeprom with xhorse line of tools.
Just a faster way to do this job, also you don’t need to deal with the learning of the key on some of these old models.. but you are definitely correct 👍🏼
This is way better than a reflash I'm gonna do this in my job I'm gonna get this mini soon, I'm a 2 man job I get called alot for these cars specially sequoia. This will make me 20times faster
It’s really not true. Car started without since we are cloning out on a super chip so there is no need to do write. Think about it it’s cloning out if I took a superchip and wrote exactly the information on it there is no need to write back information. You will need to write back the information if you choose to use a regular chip and not super chip.
So i did the corolla 2000 with mini prog today (my first one) and even though it wasnt exactly like your video, your video was a super good introduction of how it works..
Couldnt achieved it without your video, thanks alot!
Thank you so much for the wonderful warm words highly appreciate your support 🙏
Yes this is the best way. No writing back to the ecu. I usually read the key IDs then generate a 4C chip and change the ID to one of the existing keys. This is a different technique of doing the same thing.
Better then REFLASH option anyway..
Another great and informative video! Keep up the great work, my man! Thank you for your content!
Thanks for your support.
Much more to come stay tuned…
Very excellent video, thank you for this beautiful video, very wonderful
Thanks 🙏
Where can I get the book? Can you help me?@@legacylocksmith7874
Hi thanks for the video, do you have a link to download the pdf? I’m looking for it but haven’t been able to find it.
Here you go
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Thanks you so much for your video .
My pleasure. Stay tuned for more
Great video !!!
Thanks for your support.
Great video!
Can this procedure work on the older Honda/Acura . 97-02 Honda Prelude?
I’m guessing it definitely should, but haven’t tried yet.
Hello sir I can get the book u said at App Store why
Here you go
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Bro! Whats the link for the EZ Flasher manual??? Btw, thanks for such valuable information!
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf here you go. My pleasure.
thanks b4 i dont kown what is mini pro is now i kownfor older system ecu
Yes
Hi. I don't understand how do you know that it didn't read the memory with some error? something similar to when you make a bad clamping. That xhorse portable reader has some kind of error checker in the reading?. thanks for your time
It will tell you if it’s read successfully. Just need to be very stable with your hands. Need to make sure all pins touching the chip.
Great video.
I am somewhat familiar with an ar32 reader, for anyone that is familiar with that tool.
Has anyone been able to ise the eeprom file dump from a similar ecu or honda immobilizer to clone a key with the toolmax?
Thanks.
Sorry. I have no idea 🤷
Where do i download the ez flasher book?
Great lifehack thanks 😊
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Here you go.
❤️
can you post link or show us where to find that EZ flasher pdf? I cant find one online
Here you go
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Hello can you share again link to get E Z flacher book?
Here you go legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Thanks a lot
Good job, would you please give me a link to download this pdf .
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf here you go
@@legacylocksmith7874 thanks 👍
Do you have a pdf for honda motorcycle?
Only have the cars one
Can I just get the BIN file from VVDI Mini-prog on phone or do I need this KeyTool Max thing?
You need the key tool for writing the new chip everything else can be done without.
So when I have the BIN file on phone, you can’t get it off? I have Tango and HiTag for key writing
@djfremen then you might be okay
Hi what about a Delco ECU how can I read the eeprom? 2000 Camry?
I am not sure, but you can check in this following book to see which chip you need to read
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
How do you know the difference between 93C56A or 93C56B?
Small difference in the chip I guess. But when you write the key I think the tool will prefer the A
@@legacylocksmith7874 i just orderd the mini prog and am going to work on a Toyota Corolla from 2000, just got confused wich one i should use..
In the US, our Corolla does not have a transponder on this year’s
Even on the Camry, it’s usually on the V6 Models
@@legacylocksmith7874in Sweden there was a law that every car from 97 had to have transponders or the car dealers couldnt sell new cars..
Interesting, in most countries it’s like that only the US does not require that by law it’s optional. We have 2020 year models that does not have any transponders.
Скажи пожалуйста ссылку где скачать книгу на телефон ex flasher😊
Here you go
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
@@legacylocksmith7874 большое спасибо Друг !
Does mini prog work on motorcycle eeprom eg honda yamaha motorcycle?
Haven’t tried yet unfortunately.
Salut @@legacylocksmith7874
Salut @@legacylocksmith7874
where to download application chart
Here you go
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Ce quel application pour lire les eeproms
This is what you want 👇🏻?
legacylocksmithcarkey.com/wp-content/uploads/2023/09/ezflasher_manual-v16.pdf
Hello my friend, can I get the book?❤
legacylocksmithcarkey.com/2023/09/28/automotive-locksmith-resources/
Here you go
@@legacylocksmith7874Thank you ❤
Just so the people are well informed, this is not a reflash he performed. The programming procedures for a reflash are not the same as this. A clone out is what he performed, and that is the easiest way to complete the task. To correctly do a reflash, you must flash an 8 - or 16-bit virginize file depending on ymm . Once that is done, you must learn the minimum requirement of keys for programming mode to exit. That is a proper reflash. Good video, though, explaining the basics of eeprom with xhorse line of tools.
Just a faster way to do this job, also you don’t need to deal with the learning of the key on some of these old models.. but you are definitely correct 👍🏼
This is way better than a reflash I'm gonna do this in my job I'm gonna get this mini soon, I'm a 2 man job I get called alot for these cars specially sequoia. This will make me 20times faster
Send me link this book ec flasher
legacylocksmithcarkey.com/2023/09/28/automotive-locksmith-resources/
Here you go
He left out the most important part. If you don't write that new file with the programmed chip back onto the microchip, the car will not start.
It’s really not true. Car started without since we are cloning out on a super chip so there is no need to do write.
Think about it it’s cloning out if I took a superchip and wrote exactly the information on it there is no need to write back information. You will need to write back the information if you choose to use a regular chip and not super chip.