SHARK LURE CHALLENGE (impossible)😦🔥
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- I can't believe this shark swim bait lure didn't perform good! I had high hopes for this massive bait I found in hobby lobby, but I think this fishing challenge is impossible!
Don't forget to hit that "Subscribe" button and ring the notification bell to stay updated with our exhilarating fishing expeditions and outdoor escapades.
Make sure to subscribe for more fishing challenges!
Please paint to look like a white shark
Add a lip to make it go deeper
Coat it with resin to give it a smooth finish, also adding more hooks that are much bigger, (octopus hooks)
I think you need to attach from where you put the line that goes to your rod, a bit lower on the shark maybe in the mouth
You should put bigger hooks on it, more weight, and maybe a lip
Yeah I was going to say a lip to
See if you can take out some of the segments. I bet it will run smoother.
Maybe add a lip to it or a few things on each side of the tail to catch the current.❤I love your stuff tho bro keep it up❤Jesus loves you
I think you need to attach from where you put the line that goes to your rod, a bit lower on the shark maybe in the mouth.
A lip would cause the head to shake back and forth, in turn making the body follow. It will also make it dive a little in the water
Lead in the bottom with glue and soda, the soda acts as an activator. It’ll stay uprights. Learned from Marling.
Perfect to catch this bluegill that keeps stealing my 15 feet lures
You should take some of the little sections out, so it has better action
Paint it put more hooks and some led in it to help it sink so you get the movement and then I think it should be a good one.
NEVER BACK DOWN NEVER WHAT!!!! Never give up
NEVER GIVE UPPPP
1. Put some weight in the front.
2. Put a blade in the section where the mouth is.
Lip! just add a lexin polycarbonate/acrylic lip on it. Check out the marling baits snake lure for reference.
You should shave the tail were the middle part is in more into it. In the end of the tail very end is like a hammerhead, then put that tail to look down words.
Cut the segments to make them actually angular and it will run
Paint it neon like a spoon luree
You could put weights and n the bottom to keep it up right
You need to cut some of the segments out of it so it Wiggles more cut the fins off start there
You may want to get some whittling knifes and cut down the slits a little to give it more action
Bigger hooks, paint it silver and black and remove every other segment
Put bait on it 😂
I had this idea like years ago when I was like 10 cause I had 1 of those and I thought "what if I put some hooks on it"
Maybe a diver on the front so it sinks?
Why you dont put gray paint
Needs a big polycarbonate crankbait lip or else it won’t wiggle
You have to take out a couple of segments
Get some big weighted treble hooks and put on there.
Center the front line tie
Put some weights in the bottom, it keeps flipping over and floating. If all else fails put a lip on it
Color it black on the top and white on the bottom
You should put a lip on it or a popes hole hole to make the action look better.😊😊😊
Put weight under for stabilizate. And you will see.
A sinker?
Put a bill on it
Put a big weight and
Some stuff on it, so the fish can smell it
Add weight in the belly and bigger hooks
Remove some of the segments like every other it will give it better action then add some weight to the head
Notch out all the joints so there is more room for it to move and put a lip on it, should swim after all that
Put a weight in the middle of it
maybe put a lip or weights in the front
Take out everything other segment on both sides
Add a bill
Maybe a bill to keep it all the way underwater?
Maybe add so weight
Paint it so it looks better
Paint it and put a lip on it
Paint them
Paint it
I would put a lip in the sharks mouth so it can dive.
Lead
Lip lip put a lip on it
Paint it
Put some weight in the bottom
Cut the edges
Add a lip
Put a lip on it
Put weight in the head and tail
You shud paintetet
I get ur trying to make content but don’t be irresponsible those hooks can come out easily and ur leaving a fish with a hook in its mouth just for content. If ur gona do it do it right!
You need to add more hooks and bigger hook also try to put some lead weights into the head of the shark
Yes I was gonna say that
Why would he do that it’s to big anyway
And put some scent on it
Put a bill on it
All you need to do is cut out some of the sections, water can't get in between ,you need that "resistance"
So many comments about adding weight, this is absolutely what needs to be done, add a little more space and the turns will be much wider
Put in each fragment a weight, should help a lot
Stick a spoon horizontallly perpendicular to its tail, so water bashes on it and makes it move
Oooooh dont go to hobby lobby brudda
I painted one actually
Bigger hooks plus a lip would be nice
That’s sick
You should do video of the winners of your past videos
Use a shark rod so you don’t break your other rod
get bigger hooks (4/0 or 3/0), a strong musky rod, 40lb braided line on it, 1mm thick footlong fluorocarbon leader. Coat it with superglue to not get it waterlodged. Make a polycarbonate dive lip too.
Put a bill in its mouth for it to glide
Put a weight on the bottom
Cut a little bit out of the segments. Too much weight and it Needs to load the weight evenly as you reel in to create the action. so the front is more load bearing, back end should probably have some sort of lip like a crank bait to give more action. You might think I’m tripping but if you cut out a little bit of those middle segments you’ll have a much more properly weighted swim bait
Might want to put weight on the bottom to keep it up right
It needs weight in the belly of the head. Drill out a quarter inch hole, and put birdshot in there. Then use super glue to have it stay in. Or, if you have any lead you could mash into there would work better.
Paint it light colors or chartreuse and maybe add bigg hooks and lip
Drill little holes in the bottom and then put metal in the bottom and glue and seal it so it won’t be so top-heavy
Put a another screw eye and then put a bell wait on that screw I will help it sink and it’ll help keep it straight
Make it less heavy,lighter,shave the joints down a little,and bigger hooks.
Its top heavy which is why it keeps fliping and not swiming properly
Put weight on the bottom to keep it upright then put a vertical lip on for some resistant than you should be there
Bigger hooks then dill several holes at the front and back and put some split shot or lead in it
make a little crank thing in the front for the movement and make it out of a soda can
Needs weights on there somewhere, maybe a lip to get it to dive and stay on path
Add more weight so its just below the surface and paint it a little
Might be hard to add weights but bigger eyelets and trebel hooks might do it
Shave off some of the wood in the grooves not enough space for it to wiggle
Couldn’t find smaller hooks? Sheesh!
no fish will eat the wood, they will bite to see if it can eat or not.
Yes do the snake 🐍!!!!!
Drill holes on the top so there would be air and then it will stay up right
make the slits in the wood bigger and the hooks bigger
Video with it?
You should put a lip and a shaker and a weight
Put a bill on it 👍👍👍
Maybe realistic color for like yellow or someting
Put a lip on it maby
Put the little plastic piehe to the mouth to help it sink
Try putting the screw eye in on the top of the head