Hi good morning. Thanks for this new video. I've a question is it okay to remove the small retifier diote and replace it by a big one. It won't cause problem in the future. Thanks ❤️
Damn, I wasn't that lucky with a 40" Samsung TV I've found on the side of the road. It has a shorted 3BR1065 that I can not find a replacement. Have you tried to use a normal DIP8 psu IC with an external FET (from some other brocken TV) to replace the 3BR1065 with? Would it work?
@@worroSfOretsevraH , have you tried, SHOPJIMMY ? They might ? Have the part you're looking for ? They Harvest parts, from old T.V. , and Inspect them, for Damage, and the parts that are still in Spec. They Sell, on their site....
Hi, I have a haier tv LE32B7000. LED standby is on in red. Tv doesn’t on. Not by remote or button on Tv. Where should I check and how. I’m foreigner and live in Manila. You make me happy if I have your Address. Thank you so much.
@TEVTV, @4:28 Time Stamp, Thank you for you're, 220 OHM, 20 Watt's, Discharge, info from Previous video, its good practice to include the Discharge Info in your Video's.... Be cool if you could Show how you Built youre Discharge Unit, and tips and Techiniques.... It would make a good General Safety Video, Regarding Capacitor Safety....For Us All... For My Discharge, I made a Discharge Rod, 1/8" diameter, 12"inch. long, out of Solid Brass, Rod... Installed/ Soldered a, 470 OHM, 5 WATT'S Ceramic Resister...and installed/Soldered, 3 ft Alligator Clip, Ground Wire.... To Discharge Cap's... Used lots of Shrink Tube, To Insolate Rod, and Resister, And Shrink Wrapped Resister, to 1/8" Rod, and Built it up to Double insolate the Whole Rod, for Safety..... Ground Down To a Tip, on One End of 1/8" inch. Rod, to a Point, for Touching to + positive Terminal of Capacitor, and Negative Grounding Wire Aligator Clip, Attached to Metal Grounding plate, where Power Board is Mounted to..... ✅NOTE: "ALWAYS UNPLUG, T.V. BEFORE DOING DISCHARGING, AND NEVER HAVE BOTH HANDS, IN THE UNIT, AVOID CREATING A LOOP, OR PATH THAT COULD LEAD TO HEART.....⚠️" Discharger Works Great.... Used my Fluke 88V, set to Volts, AC/DC, Mode, to Test Caps, after Discharging, to Comfirn that Caps, are Safe....only took 5-10 Seconds, time, to fully Discharge.... Thanks for youre Videos, and youre Wisdom....👍😎🇺🇲.
Your years of experience shows, you found the fault almost immediately, nice fix!! 👍
I am a technician but really I have a lot of things I have never known big thanks to you
Buenas tardes colega excelente trabajo saludos desde Argentina
Always giving great ideas in electronics GOD BLESS.
i see every day your video thank you i like it ❤❤❤❤
I like the the assortment of tools. Fault finding, excellent.
Awesome job, looks simple but not so easy to troubleshoot. Thank you for your knowledge
Thank you for sharing your ideas sir nice job 👍
Thank for ur nice videos, uncle tevz,,, please show us more about panels repairing
😊😊
Great job 👍
You are good.
Good job
🎉🎉 From malawi
Great job i am from tunisia
Watching master
Very good working
Thanks for sharing Master
thank you 🙏
Good information sir
The soldering tip could tell a story or two.
Thanks sit
A nice easy fix
Thanks ❤
Thanks sir
Wawu congira.
good job
Imbag ta kasdiyay lang master.. 🙋♂️
Thank you very much
Good. Day. Thanks
👍👍👍👍👍👍👍👍👍
Thnk you
I have my Gamdias monitor and it had horizontal lines, the repair man askedd me 2500 pesos for the repair, is that reasonable?
excuse me I,m asking which type of the diod that's you chang ?fast recovery or anything else????
the diode came from a chopper transformer which is a fast-recovery diode.
Hi good morning.
Thanks for this new video.
I've a question is it okay to remove the small retifier diote and replace it by a big one.
It won't cause problem in the future.
Thanks ❤️
No caused of problem, make sure to replace it with a right value.
@@tevzTVTevatronics okay thanks so much for information 👍
Szia!magyar felirattal tudnál felrakni.a munkáiból! Köszönöm
❤❤❤❤❤❤❤
Damn, I wasn't that lucky with a 40" Samsung TV I've found on the side of the road.
It has a shorted 3BR1065 that I can not find a replacement.
Have you tried to use a normal DIP8 psu IC with an external FET (from some other brocken TV) to replace the 3BR1065 with?
Would it work?
Will work with any fast recovery diodes.
@@tevzTVTevatronics Please read again. It is not about a diode.
@@worroSfOretsevraH , have you tried, SHOPJIMMY ?
They might ? Have the part you're looking for ?
They Harvest parts, from old T.V. , and Inspect them, for Damage, and the parts that are still in Spec. They Sell, on their site....
❤❤❤👍
Hi, I have a haier tv LE32B7000. LED standby is on in red. Tv doesn’t on. Not by remote or button on Tv. Where should I check and how. I’m foreigner and live in Manila. You make me happy if I have your Address. Thank you so much.
Im in Ilocos Norte Laoag city.
Thank you for answer.
Unfortunately I live in Manila. How can I fix the problem? Salamat po.
❤❤
in this case , repair price? (us dollor) thank you!
about $80 only
süperrr
🎉❤
you have new friend at your work shop😂😅😊
they are on-the-job traning.
@TEVTV,
@4:28 Time Stamp,
Thank you for you're,
220 OHM, 20 Watt's, Discharge, info from Previous video, its good practice to include the Discharge Info in your Video's....
Be cool if you could Show how you Built youre Discharge Unit, and tips and Techiniques....
It would make a good General Safety Video, Regarding Capacitor Safety....For Us All...
For My Discharge, I made a Discharge Rod, 1/8" diameter,
12"inch. long, out of Solid Brass, Rod...
Installed/ Soldered a,
470 OHM, 5 WATT'S Ceramic Resister...and installed/Soldered, 3 ft Alligator Clip, Ground Wire....
To Discharge Cap's...
Used lots of Shrink Tube, To Insolate Rod, and Resister, And Shrink Wrapped Resister, to 1/8" Rod, and Built it up to Double insolate the Whole Rod, for Safety.....
Ground Down To a Tip, on One End of 1/8" inch. Rod, to a Point, for Touching to + positive Terminal of Capacitor, and Negative Grounding Wire Aligator Clip, Attached to Metal Grounding plate, where Power Board is Mounted to.....
✅NOTE: "ALWAYS UNPLUG, T.V. BEFORE DOING DISCHARGING, AND
NEVER HAVE BOTH HANDS, IN THE UNIT, AVOID CREATING A LOOP, OR PATH THAT COULD LEAD TO HEART.....⚠️"
Discharger Works Great....
Used my Fluke 88V, set to Volts, AC/DC, Mode, to Test Caps, after Discharging, to Comfirn that Caps, are Safe....only took 5-10 Seconds, time, to fully Discharge....
Thanks for youre Videos, and youre Wisdom....👍😎🇺🇲.
always check if the caps is totaly discharge.
@@tevzTVTevatronics, Ok, will Do....
I use my Fluke 88 V Multimeter, set to AC/DC VOLTS, Check its Discharged....thank you...😎👍🇺🇲
Every technician prayer 🤲. 😂 Making easy money 🤑💰
Bro, nothing is easy. It cause a lot of time.
@@MegatronFlexmistic09 lol!
Szia magyarul fordítást..kèrhetnèk..
Köszönöm
Hi where are you im waiting for you
Adda ti apprentice mon sir a,
How to fix pink screen and freezing
#imbrysokad
Sir work is good ❤❤ 👍👍
❤❤❤❤h