Another banging video, nice and to the point. I thought the Bradley Philips thing was sort of a fluke, but your data helps show increase in FPS as well. And your near the ocean so the humidity might even be slowing down the darts a little bit. I'm guessing that the higher weight of the plunger tube, while it might be moving a little slower then the normal delrin plunger dude, is still giving off more force then it, thus giving higher FPS ranges. Also, thank you for sharing and talking about the Armageddon event! :D
Appreciate the love my man! While the weight might be a factor, I find it much more likely that the shape of the o-ring retention slot is better holding the o-ring. Either way, this thing is crispy 🔥 See you at Arma in a few days! 💪
The sabre plunger took my fps from 310ish to 330 with the same darts. Worker gen3 bamboo 1.8 spring, 500mm barrel, 6 string scar Glow tip dragons go 380fps 😮
Yeah I think the 1.8 spring is when those longer barrels start to become practical! I bet you get another 10-20fps bump by switching to a bearing scar over a string scar. 🔥
For starters, have a few loaners. If you can show people how fun a nerf war can be, they are more likely to buy their own. Also make sure to have a few game modes ready. People generally don’t like to do the same one over and over again all day. Don’t be afraid to start small. If you only have 6 people, the play 2 teams of 3 and more will join later
The plunger does not contribute to the FPS for durability. Sabre did a great job to have this as a replacement or a solution for users like us that wish to go higher power and maintain its durability. Adding on to this, my original plunger are still working fine, After so many games, it still doesn't show any sign of wear and tear as I regularly service the blaster. E.g lubrication
The proof is in the testing 🤷♂️ The original plunger from this blaster doesn’t seem to be worn out either. But the performance and consistency gains made the switch make the purchase an easy decision.
@@mattzehr4133 thanks! That video is actually what I’m editing right now haha it’s been highly requested since I debuted it at the Maryland Foam Tournament
@@kingofgames234 like I said I put mine together and installed mine in my worker Harrier yesterday and if you do order that catching mag release I suggest you order extra bearings with it there's a separate listing for them though if you need two listings just go to the video that I just dropped by yesterday or something like that have a nice day my friend in a better one tomorrow
Thanks 🙏 Can't wait to see the other stuff they come up with (supposedly they are looking at trion internals next). And let them know the King of Games sent you 💪
Great question! I don’t have it in hand so I can’t tell you for sure. But I suspect it is needed to avoid wear on the stock catch at higher spring loads.
Great video! I won this rod at the event . I had such an awesome time at Armageddon, I went for the fun but also went hoping to win this rod . Nerf dreams do come true 😂!!!
Great question! Mine hasn’t arrived yet so I can’t say for sure but one of the things that had me kinda disappointed with the harrier was the length being almost the same as the Swift. The Seagull is what I wanted the harrier to be when it was first announced. But I won’t know for sure how good it is til it gets here. I held out for the OOD exclusive orange and will do a full review once it arrives.
@@kingofgames234 I’m thinking about buying the seagull even though the harrier has better fps the seagull is smaller and compact which is what I like for over all usage
@@kingofgames234 this would be my second gun but it’s an upgrade to the first one I’ve seen people swap out the spring to a 1.6x300 which is for the harrier but I was going to try it for the seagull I’m trying to go for a spring powered rifle and stay 300 to 250 fps at the lowest
@@MiciahChamberlain at 250 fps it would probably be fine but if you manage to get 300fps out of the seagull the prime will probably be awful. But hey that’s just my theory, test it out and let us know!
@@GrandmasterHobbyist i’ve never heard of it eating up the O-rings, BUT You’ll definitely want to upgrade to at least the metal catch. Otherwise the plunger rod will wear the plastic catch down. At the time this video came out those internals did not exist yet. But in one of more recent videos, I install the Sabre catch.
@@GrandmasterHobbyist the modded primary you asking about is still a harrier. It uses no parts from the seagull. Best is subjective. It really depends what you’re trying to do with the blaster.
@kingofgames234 oh okay cool, I ordered a harrier and 450mm barrel, big spring, the bearing prime thing, metal catch, metal plunger rod, extra O rings. 🤷♂️ I just don't know what rifling attachment is best for that fps range
@@GrandmasterHobbyist oh I just answered your other comment on my original Harrier review about that question. I was recommending the Spitfire designs modular BCAR
That is a great question! Basically, my channel is really small so I buy everything out of my own pocket and I can’t buy everything. So if I have a friend who already has something that they will let me use for a review then I can’t justify buying it when that money could go towards the next video. Luckily some stuff is covered by sponsorships but a harrier isn’t one of those things. I also don’t own a SLAB but we’ll be seeing one on the channel soon 👀
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
Nerf community is as underrated as this channel keep up the good work dude🎉🎉🎉
🙏🙏🙏
Thanks for the kind words! I got a lot of stuff coming so stay tuned 👀
True that
Have used Sabre products many times and exceptionally happy. Exceptional value for money.
This is my first product from them, but who knows maybe Conrad is feeling generous and wants to sponsor an episode 👀😂
Another banging video, nice and to the point.
I thought the Bradley Philips thing was sort of a fluke, but your data helps show increase in FPS as well. And your near the ocean so the humidity might even be slowing down the darts a little bit.
I'm guessing that the higher weight of the plunger tube, while it might be moving a little slower then the normal delrin plunger dude, is still giving off more force then it, thus giving higher FPS ranges.
Also, thank you for sharing and talking about the Armageddon event! :D
Appreciate the love my man!
While the weight might be a factor, I find it much more likely that the shape of the o-ring retention slot is better holding the o-ring. Either way, this thing is crispy 🔥
See you at Arma in a few days! 💪
The sabre plunger took my fps from 310ish to 330 with the same darts.
Worker gen3 bamboo
1.8 spring, 500mm barrel, 6 string scar
Glow tip dragons go 380fps 😮
Yeah I think the 1.8 spring is when those longer barrels start to become practical! I bet you get another 10-20fps bump by switching to a bearing scar over a string scar. 🔥
Can’t wait to get one! I’m planning on starting a new Blaster group here in southern NM with a 300 fps cap. Any suggestions on how to start.
For starters, have a few loaners. If you can show people how fun a nerf war can be, they are more likely to buy their own. Also make sure to have a few game modes ready. People generally don’t like to do the same one over and over again all day. Don’t be afraid to start small. If you only have 6 people, the play 2 teams of 3 and more will join later
@@kingofgames234 thank you for the help and suggestions.
@@tieganjordan702 actually you have inspired me with that question... I think I will make a video on starting aclub in the future.
@@kingofgames234 good to hear
The plunger does not contribute to the FPS for durability. Sabre did a great job to have this as a replacement or a solution for users like us that wish to go higher power and maintain its durability.
Adding on to this, my original plunger are still working fine, After so many games, it still doesn't show any sign of wear and tear as I regularly service the blaster. E.g lubrication
The proof is in the testing 🤷♂️
The original plunger from this blaster doesn’t seem to be worn out either. But the performance and consistency gains made the switch make the purchase an easy decision.
Just found your channel my dude. Great content I look forward to more :D
Awesome! Glad you like it and the next episode drops very soon . Also great interview with basic nerf! I watched it on twitch iirc
@kingofgames234 awesome man thanks so much for the support! What did you think of Armageddon?! Was it as much fun as it looked like
Your build at Armageddon was awesome do a video on that soon.
@@mattzehr4133 thanks! That video is actually what I’m editing right now haha it’s been highly requested since I debuted it at the Maryland Foam Tournament
Now all you need is the catch and mag release from saber lol
True!
@@kingofgames234 like I said I put mine together and installed mine in my worker Harrier yesterday and if you do order that catching mag release I suggest you order extra bearings with it there's a separate listing for them though if you need two listings just go to the video that I just dropped by yesterday or something like that have a nice day my friend in a better one tomorrow
Great video, I want to pick one up from Sabre as well!
Thanks 🙏 Can't wait to see the other stuff they come up with (supposedly they are looking at trion internals next). And let them know the King of Games sent you 💪
What do you think of the metal catch from Sabre as well, needed for higher performance configurations?
Great question! I don’t have it in hand so I can’t tell you for sure. But I suspect it is needed to avoid wear on the stock catch at higher spring loads.
That's awesome. I think I should get one of my own.
Definitely recommend it for higher FPS configurations!
Great video! I won this rod at the event . I had such an awesome time at Armageddon, I went for the fun but also went hoping to win this rod . Nerf dreams do come true 😂!!!
Yeah it was a lot of fun! Gotta get the vlog about it out soon 💪
is the priming hard with heavy springs. compared to a trion. (i don't think the trion has a hard prime)
I’d say it is a little harder to prime than the trion but not much
the 550mm barrel actually drops the fps by about 10 because the gun doesn’t have enough air volume
Good to know!
What’s your opinion on the worker seagull?
Great question! Mine hasn’t arrived yet so I can’t say for sure but one of the things that had me kinda disappointed with the harrier was the length being almost the same as the Swift. The Seagull is what I wanted the harrier to be when it was first announced. But I won’t know for sure how good it is til it gets here. I held out for the OOD exclusive orange and will do a full review once it arrives.
@@kingofgames234 I’m thinking about buying the seagull even though the harrier has better fps the seagull is smaller and compact which is what I like for over all usage
@@MiciahChamberlain what is the fps of the games you plan to take it to?
@@kingofgames234 this would be my second gun but it’s an upgrade to the first one I’ve seen people swap out the spring to a 1.6x300 which is for the harrier but I was going to try it for the seagull I’m trying to go for a spring powered rifle and stay 300 to 250 fps at the lowest
@@MiciahChamberlain at 250 fps it would probably be fine but if you manage to get 300fps out of the seagull the prime will probably be awful. But hey that’s just my theory, test it out and let us know!
ohhhhh i like this! i need that sabre plunger rod!
Trade you my plunger rod for some of your rad mods? 😂💪
@@kingofgames234 haha if I only had a cnc machine ans I knew what I was doing haha
@@xfoxgames your 3D printed stuff is pretty cool! I’ve been eyeing the short dart pilot mod, and the mega XL fate for a good minute now !
someone said that if you get this part and not the other metal internals it eats up your O ring is that true?
@@GrandmasterHobbyist i’ve never heard of it eating up the O-rings, BUT You’ll definitely want to upgrade to at least the metal catch. Otherwise the plunger rod will wear the plastic catch down. At the time this video came out those internals did not exist yet. But in one of more recent videos, I install the Sabre catch.
@kingofgames234 alright thanks. Do you think this is the best primary or is your modded half seagul the only better option or what?
@@GrandmasterHobbyist the modded primary you asking about is still a harrier. It uses no parts from the seagull.
Best is subjective. It really depends what you’re trying to do with the blaster.
@kingofgames234 oh okay cool, I ordered a harrier and 450mm barrel, big spring, the bearing prime thing, metal catch, metal plunger rod, extra O rings. 🤷♂️ I just don't know what rifling attachment is best for that fps range
@@GrandmasterHobbyist oh I just answered your other comment on my original Harrier review about that question. I was recommending the Spitfire designs modular BCAR
First to say first I lost my title 😢
There is always next time 💪
You were on a hot streak though!
Question is why don't you have a harrier?
That is a great question! Basically, my channel is really small so I buy everything out of my own pocket and I can’t buy everything. So if I have a friend who already has something that they will let me use for a review then I can’t justify buying it when that money could go towards the next video. Luckily some stuff is covered by sponsorships but a harrier isn’t one of those things.
I also don’t own a SLAB but we’ll be seeing one on the channel soon 👀