Great build demo. !! Question: Were all the servos and receivers powered by the ESC's BEC ? I.E. No separate 2 cell lipos were used to power the servos and receivers ? I want to build a similar size 3D electric and I'm concerned about what is the best way to power the control system?
Great video, Kyle! Do you have any videos on how to set up a plane with VBar neo after its been updated to use v-plane software and some tips and tricks on setup on the vtouch tx ?
I am preparing a 114 inch airplane with the same motor. In the video, it appears that an electric propeller is used. Is there any problem if I don't use an engine propeller? How did you attach the electric propeller to the engine hub?
The one I have doesn't have a brand name! But it is a standard ratchet servo lead crimping tool. Similar to this www.sussex-model-centre.co.uk/products/extension-lead-and-servo-plug-crimping-tool-sn-28-b
Awesome video, I’ve been doing a lot of research on this plane and this ends it, I’m going to buy the green one once it comes back. Two questions, did it come with wing and stab bags, also what it the size of the wheels? Thanks
That is great! It is an awesome plane! Now th ebig question, will you go Gas or electric?? The plane comes with wing and stab bags, and it comes with wheels. I did not measure the size though. I will measure tomorrow.
@@dahlkyle I’m going to be putting a gp178. So gas, also do you know anything about the extreme flight 114” slick 580, I can’t decide between that or the edge, thank you.
Great video I am here in states can you please inform me how to order one no one has no big planes pilot RC I have 112 on order but it’s a pre order If you can help me with a sky wing distribution please
Single battery like this, or at most 2 x 12s 5000-6000 mah bricks, is much more convenient. Only charge 1 pack per flight mean it is the same convinient as flying a 60” airframe!
maxamps.com/collections/12s-lipo-battery-44-4v/products/graphene-lipo-10400-12s-44-4v-battery www.rmus.com/products/watts-prism-battery-quad-or-x8-tattu-12s-10-000-mah-lipo m.aliexpress.com/item/32911555097.html There are some options from the UAV market.
That would be nice, but difficult from a manufacturing / stock keeping point of view. For now we will just make electric conversions as easy as possible!
What a beautiful plane 😍 very well put together and thought out the best I have seen hands down...
Wow. 7445 monster motor. Thank you for the detailed assembly review😊
Monster motor yes! I hope this video will help others choose to fly giant electric also
Best build video I have seen. Thank You! Will save this for myself and new RC pilots
I am glad you enjoyed it.
Very good video...But build??? This is about as easy as it gets when it comes to "building" planes. For shit sakes this might as well be a rtf lol
This is a great video. Very informative. I love this set up! I am saving for this plane. I hope it is available next summer.
Hi Kyle ! Real nice video with high quality review ! Like your work shop ! This plane just drive me crazy ! You make me dream my friend ! 💙✈️👍
Thank you!
@@dahlkyle I am Scorpion ! 🤣
Great video
Thanks!
Great build demo. !! Question: Were all the servos and receivers powered by the ESC's BEC ? I.E. No separate 2 cell lipos were used to power the servos and receivers ? I want to build a similar size 3D electric and I'm concerned about what is the best way to power the control system?
Always Mount speed controller on the right side of the motor box for maximum Cooling & do not run air ducts.. .
Great video, Kyle! Do you have any videos on how to set up a plane with VBar neo after its been updated to use v-plane software and some tips and tricks on setup on the vtouch tx ?
I am preparing a 114 inch airplane with the same motor. In the video, it appears that an electric propeller is used. Is there any problem if I don't use an engine propeller? How did you attach the electric propeller to the engine hub?
Do you still have that bueatiful BVM edge that was on that back wall and would you like to sell it?👍🏿
What servo wire crimping tool are you using? Also where do you buy the wires and terminal ends. Thank you.
The one I have doesn't have a brand name! But it is a standard ratchet servo lead crimping tool.
Similar to this www.sussex-model-centre.co.uk/products/extension-lead-and-servo-plug-crimping-tool-sn-28-b
Awesome video, I’ve been doing a lot of research on this plane and this ends it, I’m going to buy the green one once it comes back. Two questions, did it come with wing and stab bags, also what it the size of the wheels? Thanks
That is great! It is an awesome plane! Now th ebig question, will you go Gas or electric??
The plane comes with wing and stab bags, and it comes with wheels. I did not measure the size though. I will measure tomorrow.
@@dahlkyle I’m going to be putting a gp178. So gas, also do you know anything about the extreme flight 114” slick 580, I can’t decide between that or the edge, thank you.
I have not flown the Extreme flight 114" planes but I hear they are really great as well
Great video
I am here in states can you please inform me how to order one no one has no big planes pilot RC I have 112 on order but it’s a pre order
If you can help me with a sky wing distribution please
I still think what with this big of a battery splitting it into modules is better in the long run
Single battery like this, or at most 2 x 12s 5000-6000 mah bricks, is much more convenient. Only charge 1 pack per flight mean it is the same convinient as flying a 60” airframe!
Cool
Where can i buy these batteries ? can't find it anywhere
maxamps.com/collections/12s-lipo-battery-44-4v/products/graphene-lipo-10400-12s-44-4v-battery
www.rmus.com/products/watts-prism-battery-quad-or-x8-tattu-12s-10-000-mah-lipo
m.aliexpress.com/item/32911555097.html
There are some options from the UAV market.
When is scorpion going to make their own battery line
They had before and moved out of that market. We will leave it to the battery manufactures for those products!
Would prefer a version designed for electric power with optional/alternate IC power setup kit available.
That would be nice, but difficult from a manufacturing / stock keeping point of view. For now we will just make electric conversions as easy as possible!
Are the servos powered directly from the receiver?
Yes. Via 2 x Vbar NEOs wired together via a interbus cable.
What battery size?
You can watch at 7:10
How much was this plane
$1799 for the airframe.