Yes there are definite differences in cheaper plates and more costly ones! The cheaper ones sometimes are not as deeply etched as their more expensive counterparts. This can make picking up the image extremely difficult.
When using gel stamping polish I find that if u place dots instead of a line it works better n also flash curing before stamping it stops it from smudging. 😂And I like your ideal on using the metal cups with cotton balls.
Stamping has a definite learning curve, use light pressure, on the plate and again on the nail roll slightly. Moyra plates and polishes are one of my favs. Gel stamping when using pigments or chromes. I have been wanting to try clear Jelly which is Canadian. Nail art polish, the thin brush ones, they work well. Some bulk or discount stores sell them super cheap and the white is bomb!
I love stamping, don't 2 bad at it. Not done layering yet. When I first started stamping I would watch moon baby nails as she does a lot of stamping, I learnt a awful lot watching her. Loved watching you learning to stamping, I agree with you about the polishes. I use moyou London stamping polish & kads💕
I love using gel because there is no harsh odor like stamping polish. I also flash cure for about five seconds after I stamp the image so it doesn’t run and then put it on the nail.
Fun video! Just to add to the great advice you were given - when scraping a large/wide image - it's easier to use a stiffer scraper (a store gift card is a good option) and change the angle you scrape at. I holding the scraper flatter - as opposed to scraping at a perpendicular (90 degree) angle from the plate. You want to be careful that you aren't "digging into" the image. Also some people find success applying the polish to the plate by brushing in one direction and scraping in the opposite direction. When scraping an image with straight lines - it's often easier to scrape/pick up the image from the side, so you are rolling over the narrower side -- as opposed to scraping from the bottom to the top (scraping the longer side). You also want to make sure you aren't in a cold room - that can also make the polish dry faster. Finally - you can also try out different stampers. I prefer the softer, wider "monocle style" stamps - while other people prefer the rectangular "ice cube" style stampers. Anyway - as you said - it really comes down to practicing to figure out what works best for *YOU*. People have their own preferences that work best for them.
Great video. Yes I do have to cure gel stamping polish. You also don’t have to get wiping it off you can reuse it. Also try stick base coat to help if your not quick
I really need to try my normal nail polishes for stamping as I have 2 drawers full. Some of the colours are amazing and I’d love to see if they work. I don’t get why they make what should be full cover images so small, like the tartan pattern one you used. Could you imagine trying to fill in the rest of the nail and line it up. Nightmare. Great job hun ❤️🇦🇺
I did get some from Amazon of the round stamping plates and I couldn't get any of the designs buy the square ones I could . It was like the design wasn't cut deep enough .
Yes stamping plates make a difference if they are not etched well they won't pick up stamping isn't easy it may take a while to get the hang of it keep at it plus because you have top coated you can remove the image 😉 I do have a stamping video in all video's description box if you are having any trouble. it took me a while to get the hang of it but you will get there I am sure 👍
I use stamping gel because I can't work fast enough to use the regular stamping polishes. I need that extra time because I shake too much and have to take my time. I've noticed that, with the gels, you only need the smallest amount and let the gel settle into the image before picking it up. Also, use less pressure, scrape at an angle and roll the stamper from side to side when laying the image on to the nail, don't press it directly down. You actually did REALLY good. You should've seen my first time stamping. It was hideous. 😂
Yes plates do make a difference. There are plenty crappy not well etched plates. Also different stampers sometimes work with a crap plate. The standing gel also you need a lot less than the polish. 😉
Stamping plates do make a difference the deeper the etching the better A few tips for gel stamping. You don't have to rush with it and ur also pressing down a little to much when placing it on the nail that's why it's coming out blurred also you don't have to put a lot of product down because it doesn't dry unless cured you can spread it around a little goes a long way hope this helps 🖤🖤
I have heard the same thing that the better ones have better etching. But I have also heard that the right stamper can make a difference as well. And I've also heard that depending on the image you could need a more firm or more flexible scraper
@@cassybucceri276 Yes - the stamper makes a huge difference when using gel! My best one is the squishy marshmallow head from CJS…the clear (firmer) heads don’t work at all.
Yes plates do make a difference as well. Due to how etched the design is can make a huge difference on how the polish will seep in the image and the jelly stamp grabs it. I been wanting try stamping gel cause I'm horrible at stamping lol I'm not fast enough lol 😅 🙃
With gel stamping polish, you need a SMALL amount. You don't have to rush with a gel stamping polish. It also should sit for a minute to soak into the plate, and let it sit on the stamper head before stamping onto the nail
I’ve found regular stamping polish much easier than the gel ones. I find that with the gel ones the patterns/ lines never come out clean. As whereas with regular polish it’s much clearer. I have the Pinpai polishes and some Born Pretty ones ☺️ a lot of people I’ve spoken to say the same about the gel ones, the idea of them is great and having more time to work with them but they just don’t execute as well unfortunately! Stamping is good fun though 🙌🏻
I have the born pretty stamping polishes too, I got them about 8 months ago and still haven't gotten the nerve to try them yet!! Lol. Are they any good?
AliExpress I put the link in the description C$ 3.34 23%OFF | IC Chip Pick up Tool 4 Prong Grabber Tool for Small Parts Electronic Components Catch Manicure Cotton Ball Claw Durable 40JE a.aliexpress.com/_mPhY0d2
Hey hun, If you stamp over a gloss topcaot, you should buff the nail before you stamp on it. This way, your stamping polishes can grip it as well as your topcaot to seal the stamping polish in. That's why I prefer to stamp over a Matte Top Coat so you don't have to buff the nail. You can just stamp and then seal it with your topcaot of choice. Thank you for watching, hugs 💙🤗
Hey Tiffy, I got from AliExpress here the link C$ 5.01 43%OFF | Nail Art Stamper Pattern Removal Tool Absorbing Sheet Paper Nail Art Stamper Pattern Removal Tools Manicure Nails Tools a.aliexpress.com/_mt5aYvo
I watched the hall that you did with that little grabber do Hickey thing you got for your cotton balls but I don't know what the name of it is to look it up on aliexpress cause I really want to get one of those but I don't know what to call it I keep calling it a little claw pin but I don't know what it is the actual name can you tell me or give me a link to what it is thank you so much
Here you are thanks so much for watching I will also add it to the description C$ 3.34 23%OFF | IC Chip Pick up Tool 4 Prong Grabber Tool for Small Parts Electronic Components Catch Manicure Cotton Ball Claw Durable 40JE a.aliexpress.com/_mPhY0d2
Thank you so much I thought it looked more like a little claw it always reminds me of those little claw games when you get the stuffies out the big machine lol thank you
Yes u are using to much gel..yes u need to cure it and if ur stamper doesn't pick up good try washing it in warm water and soap..if that doesn't work clear jelly stamper makes the best stamper around
Yes there are definite differences in cheaper plates and more costly ones! The cheaper ones sometimes are not as deeply etched as their more expensive counterparts. This can make picking up the image extremely difficult.
When using gel stamping polish I find that if u place dots instead of a line it works better n also flash curing before stamping it stops it from smudging. 😂And I like your ideal on using the metal cups with cotton balls.
Thank you so much for the tips. Hugs 😊🤗💙
Flash curing works best for me as well! And I do mean FLASH curing…I basically run my hand head flashlight over top of the stamping head.
Stamping has a definite learning curve, use light pressure, on the plate and again on the nail roll slightly. Moyra plates and polishes are one of my favs. Gel stamping when using pigments or chromes. I have been wanting to try clear Jelly which is Canadian. Nail art polish, the thin brush ones, they work well. Some bulk or discount stores sell them super cheap and the white is bomb!
Thank you for the advice
Yes who makes the plate does make a difference. I have moyra, maniology, born pretty, moyou, clear jelly stamper plates.
I want to give those brands a try
I love stamping, don't 2 bad at it. Not done layering yet. When I first started stamping I would watch moon baby nails as she does a lot of stamping, I learnt a awful lot watching her. Loved watching you learning to stamping, I agree with you about the polishes. I use moyou London stamping polish & kads💕
I will have to check her out I could definitely use some tips thank you so much for all the love
I love using gel because there is no harsh odor like stamping polish. I also flash cure for about five seconds after I stamp the image so it doesn’t run and then put it on the nail.
Oh, that's a great tip, flash Curing the gel stamping polish. Thank you so much for watching 🤗 💙
Fun video! Just to add to the great advice you were given - when scraping a large/wide image - it's easier to use a stiffer scraper (a store gift card is a good option) and change the angle you scrape at. I holding the scraper flatter - as opposed to scraping at a perpendicular (90 degree) angle from the plate. You want to be careful that you aren't "digging into" the image. Also some people find success applying the polish to the plate by brushing in one direction and scraping in the opposite direction. When scraping an image with straight lines - it's often easier to scrape/pick up the image from the side, so you are rolling over the narrower side -- as opposed to scraping from the bottom to the top (scraping the longer side). You also want to make sure you aren't in a cold room - that can also make the polish dry faster. Finally - you can also try out different stampers. I prefer the softer, wider "monocle style" stamps - while other people prefer the rectangular "ice cube" style stampers. Anyway - as you said - it really comes down to practicing to figure out what works best for *YOU*. People have their own preferences that work best for them.
Thank you so much for the advice and watching 😊
Great video. Yes I do have to cure gel stamping polish. You also don’t have to get wiping it off you can reuse it. Also try stick base coat to help if your not quick
O ok thanks so much 😊 i will have to try that
Yesses!!! I am so excited for this video thank you ❤️
Your welcome I hope you enjoy
I really need to try my normal nail polishes for stamping as I have 2 drawers full. Some of the colours are amazing and I’d love to see if they work. I don’t get why they make what should be full cover images so small, like the tartan pattern one you used. Could you imagine trying to fill in the rest of the nail and line it up. Nightmare. Great job hun ❤️🇦🇺
Thank you so much and thank your for the name of that pattern your so knowledgeable 😁🫂
G'day Blue Rose, thank you very much for showing me some good ideas, extra cool i have the same stamping gel . have a great day 💙💜💙
You are so welcome thank you for watching 💜
Good try luv just keep at it the more you do it the better you'll become thanks for sharing and showing much love always💅💕💕💕
I did get some from Amazon of the round stamping plates and I couldn't get any of the designs buy the square ones I could . It was like the design wasn't cut deep enough .
I use paper towel under my plate, use scotch tape to remove excess off of stamper.
Yes stamping plates make a difference if they are not etched well they won't pick up stamping isn't easy it may take a while to get the hang of it keep at it plus because you have top coated you can remove the image 😉 I do have a stamping video in all video's description box if you are having any trouble. it took me a while to get the hang of it but you will get there I am sure 👍
I will check it out thank you 😊
I use stamping gel because I can't work fast enough to use the regular stamping polishes. I need that extra time because I shake too much and have to take my time. I've noticed that, with the gels, you only need the smallest amount and let the gel settle into the image before picking it up. Also, use less pressure, scrape at an angle and roll the stamper from side to side when laying the image on to the nail, don't press it directly down. You actually did REALLY good. You should've seen my first time stamping. It was hideous. 😂
Lol thank you for the advice ☺️
Would you try to use the venalisa mud gels and paint gels for stamping? The stamping gels feel like the same consistency as the stamping gel
Would definitely be worth trying
Yes plates do make a difference. There are plenty crappy not well etched plates. Also different stampers sometimes work with a crap plate. The standing gel also you need a lot less than the polish. 😉
Lol yes I kinda made a mess but next time definitely be using less gel thanks so much for watching
Stamping plates do make a difference the deeper the etching the better A few tips for gel stamping. You don't have to rush with it and ur also pressing down a little to much when placing it on the nail that's why it's coming out blurred also you don't have to put a lot of product down because it doesn't dry unless cured you can spread it around a little goes a long way hope this helps 🖤🖤
Thank you so much
I have heard the same thing that the better ones have better etching. But I have also heard that the right stamper can make a difference as well. And I've also heard that depending on the image you could need a more firm or more flexible scraper
@@cassybucceri276 Yes - the stamper makes a huge difference when using gel! My best one is the squishy marshmallow head from CJS…the clear (firmer) heads don’t work at all.
I love gel stamping polish, you can add glitter, chrome, etc over the stamped gel image.
Remember, a gel product does not air dry
Yes plates do make a difference as well. Due to how etched the design is can make a huge difference on how the polish will seep in the image and the jelly stamp grabs it. I been wanting try stamping gel cause I'm horrible at stamping lol I'm not fast enough lol 😅 🙃
I do prefer polish but I think that Ena Sui gel turned out pretty good and I'm not that good at it yet
With gel stamping polish, you need a SMALL amount. You don't have to rush with a gel stamping polish. It also should sit for a minute to soak into the plate, and let it sit on the stamper head before stamping onto the nail
Love it thank you so much for the advice 😊
Ohhhhhhh
Tfs this was very helpful because I can't stamp worth bleeeep🤣
Thank you so much 😆
Yes, plates make a huge difference and sometimes different stampers pick up better on some plates..its trial and error.
Thank you I thought so but wasn't to sure
Yes, you have to cure stamping gel, its a gel product.
Yes thank you for watching 💜
I’ve found regular stamping polish much easier than the gel ones. I find that with the gel ones the patterns/ lines never come out clean. As whereas with regular polish it’s much clearer. I have the Pinpai polishes and some Born Pretty ones ☺️ a lot of people I’ve spoken to say the same about the gel ones, the idea of them is great and having more time to work with them but they just don’t execute as well unfortunately! Stamping is good fun though 🙌🏻
Lol yeah the gel is just not as clean
I have the born pretty stamping polishes too, I got them about 8 months ago and still haven't gotten the nerve to try them yet!! Lol. Are they any good?
Where did you get the little grabber tool? I love it!
they are called four prong picker. they use the for computer chips and welding.
If you type in cotton claw or mani saver they will come up
AliExpress I put the link in the description
C$ 3.34 23%OFF | IC Chip Pick up Tool 4 Prong Grabber Tool for Small Parts Electronic Components Catch Manicure Cotton Ball Claw Durable 40JE
a.aliexpress.com/_mPhY0d2
Can you do this over a glossy coat too? Or would it be better to stamp over a matte coat and then go over the stamps with a glossy coat?
Hey hun,
If you stamp over a gloss topcaot, you should buff the nail before you stamp on it. This way, your stamping polishes can grip it as well as your topcaot to seal the stamping polish in. That's why I prefer to stamp over a Matte Top Coat so you don't have to buff the nail. You can just stamp and then seal it with your topcaot of choice. Thank you for watching, hugs 💙🤗
@@BlueRoseNails Thank you. I just went ahead and ordered a bottle of the matte. It was only $6 :)> Appreciate the tips (pun intended!). Cheers!
Where'd you get that lint rollerey thing?
Hey Tiffy,
I got from AliExpress here the link
C$ 5.01 43%OFF | Nail Art Stamper Pattern Removal Tool Absorbing Sheet Paper Nail Art Stamper Pattern Removal Tools Manicure Nails Tools
a.aliexpress.com/_mt5aYvo
🤗🐰
I watched the hall that you did with that little grabber do Hickey thing you got for your cotton balls but I don't know what the name of it is to look it up on aliexpress cause I really want to get one of those but I don't know what to call it I keep calling it a little claw pin but I don't know what it is the actual name can you tell me or give me a link to what it is thank you so much
Here you are thanks so much for watching I will also add it to the description
C$ 3.34 23%OFF | IC Chip Pick up Tool 4 Prong Grabber Tool for Small Parts Electronic Components Catch Manicure Cotton Ball Claw Durable 40JE
a.aliexpress.com/_mPhY0d2
four prong picker, used for computer chip and welding. so maybe on ali it is called I C pick up tool, four prong.
Thank you so much I thought it looked more like a little claw it always reminds me of those little claw games when you get the stuffies out the big machine lol thank you
Lol omg it really does 🤣
You are so welcome
Yes u are using to much gel..yes u need to cure it and if ur stamper doesn't pick up good try washing it in warm water and soap..if that doesn't work clear jelly stamper makes the best stamper around
Yeah I kinda relieved I was using quite a bit of gel thanks so much for the advice
@@BlueRoseNails u r welcome 👍
Clear jelly stamper is the best and born pretty store is the worst