ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- This week on Shaper Sessions... Today's Shaper Session is devoted to Origin Pro Tips! We'll answer all of these common questions, along with as many more Pro Tips we can pack in.
Subscribe: / shapertools
Upgrade Your Workshop with Shaper Tools
Bring digital precision to your projects with the complete Shaper System. Discover unrivaled ease, accuracy, and reliability that will revolutionize your craftsmanship.
Want more Shaper content? Check out these playlists:
△ The Complete Shaper System: • The Complete Origin Sy...
△ Woodworking Masterclasses: • Shaper Presents: Woodw...
Don’t miss our bi-monthly livestream, Shaper Sessions! www.shapertool...
Join the community: community.shap...
Follow Shaper:
△ Instagram: / shapertools
△ Facebook: / shapertools
△ Twitter: / shapertools
△ TikTok: / shapertools_official
△ Website: shapertools.com
Want to send us something? shapertools.co...
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
This was an extremely helpful video. Thank you for explaining not just the "how" but the "why" of operating Origin. I continue to be amazed by how refined the product is and by the attention to detail that went into its design. I am also quite impressed by the qualilty of the educational videos from both the Ameican and German teams. I hope that Shaper will be able sustain this level of quality as the company grows.
Guys, I am new to the Shaper. I would really appreciate a basic program on engraving that talks about bit choice, settings, and tips and tricks regarding the various font choices. I saw the program on the SLFs, but that program assumed the viewer already knew the basics. Thanks for considering this.
Great video gentlemen! Many great tips. My two favorites are guiding the Origin inside vs. Outside when cutting around corners and the option for lifting Origin when scanning.
One of your better video's. I have used my Origin for a few projects and have learned alot from this video. 1- i was not scanning properly. 2- setting a front grid vs back grid. 3- z touch. I have had issues with pine end grain and i could not get the z touch to work. I had to go off the workspace.
Thanks guys for the info!!
Good job guys. For me the advice about corners and dog bones will be most helpful going forward. ( 56 mins in)
Very helpful! Getting much better results since following your tips. Thanks a lot!
A small tip for creating a grid: the spindle does not have to be plugged into the shaper during the process. This saves a few steps. The contact is also recognized without contact to the power supply.
I know but it's like a reflex action. :-) I wish there was an easier way to plug and unplug the spindle.
I would like to see cutting a large object
My Pro Tip is to attach the bigger D36 Festool hose connection to Origin. Much better hold and more compact than the D27 hose connector.
Very good tutorial, I am on the fence about getting one of your machines and wanted to ask if it is possible to make a full blind dovetail joint with the shaper origin? Br from Sweden
What do I want to see? I want to see you guys have more fun. :)
I would like to fabricate a speaker cabinet out of 18mm thick 13-layer baltic birch. I'd love a video of cutting the panels of 18mm thick material. Maybe one or two sides of the cabinet and talk about how to start with 8'x4' sheet. ie: do you recommend rough cutting out panels before even beginning with the Origin.
Edge vs surface registration for z touch
I have purchased tape rolls that are defective in that the dominoes are faint or missing (just plain white paper) and the tape thickness is thinner in places and rips. Also in these cases the stickiness is not good and doesn’t adhere. Seems like a quality control issue. Frustrating and the tape is very expensive. Any remedy?
Michael from Battle Creek MI
Didn’t know about the ztouch bar on the bottom. Perfect pro tips for anyone just getting started. Thanks!
Use of offsets
If I can have hundreds of Workspaces, how on earth would you keep track of them all. Would be great if you could download a list (csv) so you could index. Just a thought.
Can you use the camera to digitally enter a template into origin?
Only use complete “dominos” (partials don’t work), so take the extra second or two and cut the tape between “dominos”.
Is that hard to work with for people who can’t read very well
How to duplicate items on the shaper screen,
Is Shaper capable of routing Tarsal floor If so what bit
How far apart should it be
Can you apply a film finish over shaper tape, for example if you build a large workbench where you want permanent dominos?
Hi Andrew,
If you're going to coat the tape we recommend something very thin, and be mindful of how the reflection of overhead lights might affect the camera. Packing tape often works as well as film, but either can work!
I’ve see people use tape in the cutting field. Is that necessary?
Tape should be placed anywhere Origin can see during the cut. Sometimes this will put tape in a cutting area so that Origin can track well throughout a cut.
What if a client wants inlay done on an uneven floor?
you need to use a plate that is flat. any uneven plane creates tape errors