MT07 Lesson10: Computer Aided Manufacturing (CAM)

10. Computer Aided Manufacturing (CAM)
10.1 Introduction of cam
10.1.1 User Interface
10.1.2 Setup of materials
10.1.3 Setup of cutting tools
10.1.4 Strategy of cutting processes
10.1.5 Generating tool paths
10.1.6 Tool parts simulation
10.2 2D cam
10.2.1 Holes Drilling
10.2.2 Face cutting
10.2.3 Side cutting
10.2.4 Pocket cutting
10.2.5 Slot cutting
10.3 cam Milling
10.3.1 Rough cutting
10.3.1.1 Z level Roughing
10.3.1.2 Parallel Roughing
10.3.1.3 Plunge Roughing
10.3.1.4 Flat Roughing
10.3.1.5 Cutting Boundaries
10.3.1.6 Step over and leads
10.3.2 Finish cutting
10.3.2.1 Parallel Finishing
10.3.2.2 Z Level Finishing
10.3.2.3 Corner and Pencil Finishing
10.3.2.4 Iso line Finishing
10.3.2.5 Radial and Spiral Finishing
10.3.2.6 Flow line Finishing
10.3.2.7 Between 2 curves Finishing
10.3.2.8 Swarf Finishing
10.3.2.9 Cutting Finishing
10.3.2.10 Step overs Finishing
10.4 cam Lathe
10.4.1 Facing
10.4.2 Boring
10.4.3 Grooving
10.4.4 Threading (Inside and Outside)
10.4.5 Cut off
10.5 cam Wire Cut
10.5.1 Die Cutting
10.5.2 Punch Cutting
10.5.3 Taper Cutting
10.5.4 4 Axis Wiring Cutting
10.5.5 No Core Cutting
10.6 cam Router
10.6.1 Contouring
10.6.2 Pocketing
10.6.3 Engraving
10.6.4 Chamfering
10.6.5 Raster to vector Translator
10.6.6 Nesting
10.7 cam Multi-Axis
10.7.1 4 Axis Milling
10.7.2 5 Axis Swarf Milling
10.7.3 5 Axis Index Drilling