All of a sudden, there is no availability on the market for Coolrunner Rev C (Aliexpress, Ebay, local market etc), so you may need to adjust your installation to Matrix chipmod. Rev 1 for Fat consoles would be preferable because there is no oscilator on it. Rev 3 is coming with Oscilator which would be needed for Slim models not for Fat. The signals on Xbox 360 board we need are the same but there is different literation on the Matrix chip than this of Coolrunner. So here are some info about where the signals should be connected on Matrix chip: RESET (RST) is "A" point, POST is "B", CLOCK (CLK) is "C" and PLL is "F". GROUND (GND) and 3,3v are obvious and same voltage here so it is the same installation like Coolrunner. Make sure that you will make the choice for Fat models grounding the points needed, here is a link on Weekend Modder website which covers all the above www.google.com/imgres?q=matrix%20xbox%20360%20points&imgurl=https%3A%2F%2Fweekendmodder.com%2Fimages%2Frgh12%2Fmatrixrgh12.png&imgrefurl=https%3A%2F%2Fweekendmodder.com%2FRGH-falconjasper.html&docid=XWBWbSY2o_CPyM&tbnid=Q3oTbZNGzbAP4M&vet=12ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA..i&w=526&h=333&hcb=2&ved=2ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA, program the chip and this is all you want to make the adjustments. All the rest are the same as it is for coolrunner installation! Good luck!🙂
RGH2 is an outdated method of the Reset Glitch Hack. It uses I2C slowdown instead of PLL slowdown like RGH 1.2 does. It was overall not that consistent and eventually had been replaced with new more reliable glitch methods like RGH 1.2, RGH 3, and S-RGH.
@@ChristakisTech interesting, i have a jasper with rgh2 and a glitch matrix chip and it's been working perfectly for years now, and boots pretty fast. you saying rgh3 is more reliable than rgh2? seen a lot of people with dead units after rgh3 or issues, i mean phat models.
@@iosifmihaisoroiu3945RGH2 In comparison with RGH3 for phat models I couldn't really say what is better as some issues has been reported as far as concern reliability with RGH3 on phat consoles. But from what I could say RGH1.2 is more modern solution compared to RGH2 and considered more reliable and easier to tune it. Go check ConsoleMods Wiki for more info.
@@СергейНечаев-ы4к ive heard very differing things regarding 3.0 on phat consoles. apparently it doesnt play very nice with them, they might work initally but over time stop working as well. personally ill stick to 1.2 with phats.
All of a sudden, there is no availability on the market for Coolrunner Rev C (Aliexpress, Ebay, local market etc), so you may need to adjust your installation to Matrix chipmod. Rev 1 for Fat consoles would be preferable because there is no oscilator on it. Rev 3 is coming with Oscilator which would be needed for Slim models not for Fat.
The signals on Xbox 360 board we need are the same but there is different literation on the Matrix chip than this of Coolrunner. So here are some info about where the signals should be connected on Matrix chip: RESET (RST) is "A" point, POST is "B", CLOCK (CLK) is "C" and PLL is "F". GROUND (GND) and 3,3v are obvious and same voltage here so it is the same installation like Coolrunner.
Make sure that you will make the choice for Fat models grounding the points needed, here is a link on Weekend Modder website which covers all the above
www.google.com/imgres?q=matrix%20xbox%20360%20points&imgurl=https%3A%2F%2Fweekendmodder.com%2Fimages%2Frgh12%2Fmatrixrgh12.png&imgrefurl=https%3A%2F%2Fweekendmodder.com%2FRGH-falconjasper.html&docid=XWBWbSY2o_CPyM&tbnid=Q3oTbZNGzbAP4M&vet=12ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA..i&w=526&h=333&hcb=2&ved=2ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA, program the chip and this is all you want to make the adjustments. All the rest are the same as it is for coolrunner installation! Good luck!🙂
what's the difference betwen rgh 1.2 an rgh2 ??
RGH2 is an outdated method of the Reset Glitch Hack. It uses I2C slowdown instead of PLL slowdown like RGH 1.2 does. It was overall not that consistent and eventually had been replaced with new more reliable glitch methods like RGH 1.2, RGH 3, and S-RGH.
@@ChristakisTech interesting, i have a jasper with rgh2 and a glitch matrix chip and it's been working perfectly for years now, and boots pretty fast. you saying rgh3 is more reliable than rgh2? seen a lot of people with dead units after rgh3 or issues, i mean phat models.
@@iosifmihaisoroiu3945RGH2 In comparison with RGH3 for phat models I couldn't really say what is better as some issues has been reported as far as concern reliability with RGH3 on phat consoles. But from what I could say RGH1.2 is more modern solution compared to RGH2 and considered more reliable and easier to tune it. Go check ConsoleMods Wiki for more info.
@@ChristakisTech nice, thank you
rgh 3 for falcon has been good on mine my jaspers needed to be 1.2
I am sorry, but why RGH 1.2, since there is a chipless RGH 3.0?
rgh 3.0 is somewhat unstable on alot of consoles, i think its only best on trinity/corona but im not 100% sure
@@elmlele why? It's pretty stable, same as rgh 2.0
@@СергейНечаев-ы4к ive heard very differing things regarding 3.0 on phat consoles. apparently it doesnt play very nice with them, they might work initally but over time stop working as well. personally ill stick to 1.2 with phats.
@@СергейНечаев-ы4к it's very hiit and miss with phat consoles, some work very well, some bug out and some just die...
@@iosifmihaisoroiu3945 I've used it on my Jasper and 360E (Corona). Works well for like...many months lol
More reliable for fat consoles