Good explanation for easy to understand.. thanks . but small observation . Calculation mistakes observed in closed tank TX formulae while submitting the values...
The drawing for L max is deceiving, it should be drawn above upper (low side) seal by 22.92". The answer for the 4mA range on the drawing for the transmitter mounted below the high side seal has an error. It reads -122.08", should be -112.08".
The author pleugerized the drawings from Emerson site ( Rosemount ) but wrote 180 in. Instead of 108" for the Lmax. Formula is correct, numbers are wrong.
This drawings were directly taken from Emerson website but the Lmax makes no sense at 180 in. Because it should be 108 in. Instead. Calculations are WRONG!. formulas used are correct.
Can you please recheck last case -- Closed tank with DP type LT Remote capillary in which Lrv is -112.08 and Urv is 22.92 . This is wrong result of lrv and urv.
I am satisfied with your simple and well detailed explanations 👏🏻😍
Good explanation for easy to understand.. thanks . but small observation . Calculation mistakes observed in closed tank TX formulae while submitting the values...
非常合理 简单易懂
The drawing for L max is deceiving, it should be drawn above upper (low side) seal by 22.92". The answer for the 4mA range on the drawing for the transmitter mounted below the high side seal has an error. It reads -122.08", should be -112.08".
I confuse why Lmax is higher than distance dL (between low pressure seal and high pressure seal) in the close tank with capillary tube.
Thank you very much
Please also make video for displacer & radar LT
Excellent explanation 👌👌
Thank you so much ❤
Very useful
how dL = 120 < Lmax = 180 in closed tank with DP type level transmitter that is wrong
i think dL = 180 and Lmax = 120 is right
Where did the 180 come from?
Hi dear ..can you help me about differential pressure transmitter calebration on circular tank?
LRV for DP capillary closed tank, it should be 0”x0.75 - ((60” + 60”) x 0.934)
What is mean high pressure seal and how to measure it ?
nice tutorial
Thanks
Great information
LP tapping is above max level. But then also its length is 120 which is lesser then 180. I think there is something wrongly interpreted.
The author pleugerized the drawings from Emerson site ( Rosemount ) but wrote 180 in. Instead of 108" for the Lmax. Formula is correct, numbers are wrong.
where did dL=120 come from?? on 6:42 video
please someone tell me
why CC height 120 in is lower than level height 180 in
what the meaning of dH ?
This drawings were directly taken from Emerson website but the Lmax makes no sense at 180 in. Because it should be 108 in. Instead. Calculations are WRONG!. formulas used are correct.
Can you please recheck last case -- Closed tank with DP type LT Remote capillary in which Lrv is -112.08 and Urv is 22.92 . This is wrong result of lrv and urv.
تم
Stay connected bro..hit hug
Not bad
Thanks
Welcome