Rotation Position of the Stepper Motor | Atur Posisi Putaran Stepper Motor ULN2003 Dengan Keypad

[@erwinwinter7803]

Bisa bantu di rakitkan bang?

[@pintushare]

@@erwinwinter7803 bantu rakitkan bgmn bang?

[@rullysamuelsianipar]

Gmn caranya kalo misalnya 1 tombol, misal tombol A.
tiap ditekan 1x rotasi cw,
ditekan lagi 1x rotasi cw lagi dan ditekan lagi 1x rotasi cw lagi
Jadi totalnya 3 x rotasi cw, 1x rotas cw tiap ditekan

[@pintushare]

Bisa kak, tentunya di coding utk pengaturannya 🙏🙏

[@farizzatnika9135]

bang itu bisa buat ngatur berapa putarannya? misal pengen ngatur di 50 putaran tanpa balik lagi.

[@pintushare]

Bisa kak ngatur jumlah putaran yg kita mau

[@dhaniwalnut6133]

Bang buatin video buat buka tutup hordeng jendela pakai remot

[@pintushare]

Baik bang nanti kita coba buatkan demonya 🙏

[@fristackermant7343]

Bang itu putranya bisa 360° full?

[@pintushare]

Bisa bang 👍

[@sivasundarvijaivijai4039]

code link cannot download sir.

[@pintushare]

pintu-share.blogspot.com/2021/11/rotation-position-of-stepper-motor-atur.html?m=1

[@sivasundarvijaivijai4039]

Thank you so much sir

[@ColomanGrande]

al copiar el skech sale error: stray '\302' in program
y error: stray '\240' in program no se de donde biene ese error

[@pintushare]

Please recheck.the flow of diagram

[@ColomanGrande]

@@pintushare Hola despues de revisar todas las lineas sigue saliendo el mismo erroren esta linea
v_pass = v_pass + customKey;
void loop(){= customKeypad.getKey();
// just print the pressed key
if (customKey != NO_KEY){
Serial.println(customKey);
v_pass = v_pass + customKey;
switch(customKey){
case '0':
stepper.runToNewPosition(0);
break;
case '1':
stepper.runToNewPosition(4000);
break;
case '2':
stepper.runToNewPosition(8000);
break;
case '3':
stepper.runToNewPosition(12000);
break;
case '4':
stepper.runToNewPosition(16000);
break;
}
}
}
estos son los errores:
MOVIMIENTO_POR_TECLADO:37:34: error: stray '\302' in program
v_pass = v_pass + customKey;
^
MOVIMIENTO_POR_TECLADO:37:35: error: stray '\240' in program
v_pass = v_pass + customKey;
^
exit status 1
stray '\302' in program

[@pintushare]

@@ColomanGrande english please brother 🙏🙃

[@ColomanGrande]

@@pintushare Hello, after reviewing all the lines, the same error continues to appear in this line
v_pass = v_pass + customKey;

[@ColomanGrande]

error: stray '\302' in program
y error: stray '\240' in program
it refers to the fact that when downloading the program, it is copied with many separations and the sketch gives an error

[@bukansarjana999]

Aslkm, ada no WAx han?

[@pintushare]

Via youtube bang🙏

[@bukansarjana999]

Menerima jasa coding gan?

[@pintushare]

@@bukansarjana999 maaf kk, tdk buka jasa coding 🙏hanya utk tutor saja, terima kasih