I just change the oil in my CB500XA with no mess at all. I leave it on the side stand, drain it for about an hour. Then tilt it from side to side to get all the oil out. Put the drain plug back in hand tight. Then remove the oil drain pan which holds all the oil. And then put it on the center stand. Put the oil drain pan back under it. Remove the drain plug to drain any remaining oil. and then take off the oil filter.
My CBX gets thrashed regularly and I feel more comfortable changing the oil every 4000 miles. I got caught out with the centre stand first time, when the oil fired out almost horizontally and pissed everywhere apart from the pot I put underneath 🤬 It’s due the 16000 mile valve service next, beyond my capabilities, and the dealership has quoted £410. Along with the tyres, chain and sprockets it’ll need as well, I’m really looking forward to that one 🙄
I'm of the same thinking. Also that oil is quite thin. Valve checks I'll leave to the dealership, there's a lot to remove isn't there? Not too bad though compared to some. 👍👍
Another excellent TMJ from the CB vault. I now know what to buy you for Christmas- a roll of tin foil so that you don’t ration it in future. Mrs CB may also need some new kitchen trays and measuring jugs for Christmas after your video. Second only to stripping the engine and cleaning all the components through the dishwasher. Keep those TMJs coming 😂😂😂
In my defence I was coming down with flu, though didn't realise it during filming. I always wait till 'She-Who-Must-Be-Obeyed' is faraway. The dishwasher, as you suggest, superb for removing all evidence. But too much tin foil might give me away! 😉 Cheers as always! 👍👍
What's the longest you've rode in one day? I'm south cost uk and I took mine to Wales this summer, and I couldn't of picked a better bike for the beacons and devils staircase, this bike was made for those roads.really natural,great video.
Hi Codger. Just about to change the oil on my 2023 CB500X. I've done about 4000 miles. Did you find your bike quite tappety when starting from cold? Mine is and it's pretty annoying considering my 44,000 mile CBF500 sounds good right from the off. Cheers.
I only do basics. Valves etc I leave to dealership these days. I was lucky to find a manual on eBay in USA. Hard to find for 2022+ bikes. There are a few online ones for earlier models if you ask on the FB group for a PDF link. They're not so different. 👍
@@CodgerBiker Thanks for the prompt reply. I've owned a T7 from new in 2022 and now downsizing to the Honda 500 NX. I do all of my own servicing and repair work and Yamaha's policy on that is quite generous. You're pretty much OK so long as you use OEM or accepted alternatives. (Oh, and a record) Honda's view seems much more ambiguous from what I can find. I just thought you might've found out more than I have. The T7 was quite a hassle for routine servicing considering it's classed a 'simple' bike. Even a plug swap took me almost half a day! And, the valve clearance check is more fiddly than on some in-line 4's!!! Part of my reasoning for getting the Honda is its relative simplicity (I hope) on that score.
It's a simple bike, but accessing plugs etc is quite involved, buried under the tank. Most modern twins seem to be the same. Due to a spine injury I simplified my bikes so I only have an NT1100 now. Road only and gentle until (fingers crossed) I get back to full fitness one day. 🤞
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
I don’t know what I loved more….
The Slipknot shirt or the cats meow🤣🤣
Great work CB👍💯
Cheers my friend. Ernie is stepping up now his time has come to star. 👍👍😸
Thanks for this vid Codger, humorous and fun to watch as always. Looking forward to more in due course 👍. Love to Scarlet ❤
Glad you enjoyed it, thanks for watching 👍
Always a joy to watch your vids. Looking forward to see you in the next one.
Thanks for watching. Much appreciated 👍
I just change the oil in my CB500XA with no mess at all. I leave it on the side stand, drain it for about an hour. Then tilt it from side to side to get all the oil out. Put the drain plug back in hand tight. Then remove the oil drain pan which holds all the oil. And then put it on the center stand. Put the oil drain pan back under it. Remove the drain plug to drain any remaining oil. and then take off the oil filter.
Since after removing the drain plug, the oil flows backwards, I find it better not to have the bike on the center stand when changing the oil.
My CBX gets thrashed regularly and I feel more comfortable changing the oil every 4000 miles. I got caught out with the centre stand first time, when the oil fired out almost horizontally and pissed everywhere apart from the pot I put underneath 🤬
It’s due the 16000 mile valve service next, beyond my capabilities, and the dealership has quoted £410. Along with the tyres, chain and sprockets it’ll need as well, I’m really looking forward to that one 🙄
I'm of the same thinking. Also that oil is quite thin. Valve checks I'll leave to the dealership, there's a lot to remove isn't there? Not too bad though compared to some. 👍👍
Another excellent TMJ from the CB vault. I now know what to buy you for Christmas- a roll of tin foil so that you don’t ration it in future. Mrs CB may also need some new kitchen trays and measuring jugs for Christmas after your video. Second only to stripping the engine and cleaning all the components through the dishwasher.
Keep those TMJs coming 😂😂😂
In my defence I was coming down with flu, though didn't realise it during filming. I always wait till 'She-Who-Must-Be-Obeyed' is faraway. The dishwasher, as you suggest, superb for removing all evidence. But too much tin foil might give me away! 😉 Cheers as always! 👍👍
What's the longest you've rode in one day? I'm south cost uk and I took mine to Wales this summer, and I couldn't of picked a better bike for the beacons and devils staircase, this bike was made for those roads.really natural,great video.
I've done about 450+ miles in a day. It is a comfortable bike to trundle along on 👍
It is always a wee bit messy, the drain plug should be vertical.
It'd be easier. Must get a magnetic drain plug too. 👍👍
That's a LOT of gravy!
I eat a lot of chips! 😂
Hi Codger. Just about to change the oil on my 2023 CB500X. I've done about 4000 miles. Did you find your bike quite tappety when starting from cold? Mine is and it's pretty annoying considering my 44,000 mile CBF500 sounds good right from the off. Cheers.
It wasn't too bad before, or after, the oil change. 👍
@@CodgerBiker Thanks for the reply. I'll see how it sounds after an oil change. All the best.👍
Good luck! 👍
@@CodgerBiker🤞🤞
Do you do all your own servicing?
Where did you get your workshop manual from?
I only do basics. Valves etc I leave to dealership these days. I was lucky to find a manual on eBay in USA. Hard to find for 2022+ bikes. There are a few online ones for earlier models if you ask on the FB group for a PDF link. They're not so different. 👍
What is Honda's policy if you've done all your own servicing and you have a warranty claim?
Depends I guess on the country. I think (here) you have to prove you followed the recommended procedures, but don't quote me on that.
@@CodgerBiker Thanks for the prompt reply. I've owned a T7 from new in 2022 and now downsizing to the Honda 500 NX. I do all of my own servicing and repair work and Yamaha's policy on that is quite generous. You're pretty much OK so long as you use OEM or accepted alternatives. (Oh, and a record)
Honda's view seems much more ambiguous from what I can find.
I just thought you might've found out more than I have.
The T7 was quite a hassle for routine servicing considering it's classed a 'simple' bike.
Even a plug swap took me almost half a day! And, the valve clearance check is more fiddly than on some in-line 4's!!!
Part of my reasoning for getting the Honda is its relative simplicity (I hope) on that score.
It's a simple bike, but accessing plugs etc is quite involved, buried under the tank. Most modern twins seem to be the same. Due to a spine injury I simplified my bikes so I only have an NT1100 now. Road only and gentle until (fingers crossed) I get back to full fitness one day. 🤞
awesome vid, as always
Thanks for watching 👍
Piece of cardboard, slight V in the middle, up behind the sump plug as you remove it, all the oil will drain into the front tray.
Good tip!👍
proper oil quantity per manual is 2.6 l not 2.7 l . Oil on side glass should be about mid way. You overfilled a little.
Correct, but Depends on how much you get out. Anywhere below top of window on level ground is fine. Not critical. It's just above middle today 👍