Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL He even didn't show how he took that from the ground. Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Could I give an advice? Please improve your security methods of work... don't cut any material with you foot so near! Or use safety shoes... It's so dangerous... and I mechanic... it means I know a little about it! Well done... beautiful and exact shape!
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on TH-cam.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
Great template teaching . Thank you so much for your video.
Hola! ✌🏽Saludos desde Mexico 🇲🇽🔥💎
Good video because I finally learned how to make the circular shaping mechanism
‼️❤️VERY NICE ❤️‼️
Sou do Brasil. Brigado sua ideia é muito boa
El mejor explicado bendiciones
Ahah! Now I know how to make bowl jig. Thanks.
That's an easy way of making a tool thanks a lot . I was looking for a video on how to make one...that makes pot making so much easier ..
Sir..really nice. May I request u to give ur mob. No so that I can talk to u in details.
very nice, would have like to seen it sitting up-right!
Muy bueno el video, gracias por compartir con nosotros su conocimiento.. Saludos desde Paraguay
You make it look so easy
very nice and is simple to do it thanks alot
Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉
Ficou top 👏👏👏👏
Que material é esse do gabarito?
aluminum composite material
Excellent creativity, I love the simple design and form of the tool used to make such a beautiful pot.
Very good and easy to follow video, thank you
I only have two toes left, however I still have all of my fingers except three.
Where is the final result ??
th-cam.com/video/HLkiZ22TLGM/w-d-xo.html
The final result : the pot died 🤣😂
me encanta la tecnica . excelente
Топ! то самое видео
Excellent!
Essa montagem deu nó na minha cabeça, mais tenho q aprender,ficou lindo
Can you send me a measurement of the temple u built
Hasta yo aprendi tambien
waiting for part 2 ....
A beautiful thing
Great vid
秀樹感激Goodです=3
مان گٸے استاد تیرے جگاڑ کو 😂😂😂😂😂😂❤❤❤
Muito bom👏👏👏👏
I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?
I will buy rather thanks 😁
show the final pot but or it was not well
We watched and didn’t get to see the finished pot. Really really disappointing.
Did you use sand or dirt for your mold. Does it make a difference what you use for the mold
Use damp sand , so it can stick to itself and hold its forum !
very nice,thank's
Where info on supplies or anything?
14 minutes of video and you cut it right im the end... what the hell...
Amazing
Are you serious? What is amazing???
@@ninadelisboa That they had the audacity to post it?
@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL
He even didn't show how he took that from the ground.
Actually I don't believe he was able to lift that up
He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure
Drying
Didn't show the finished product
Is that mud or sand
Что за материал Вы в начале ролика отрезали?
Bom dia por favor diga me a medida desse gabarito
how many mm is the aluminium composite sheet?
Incrível !!!
Parabéns !!!
First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end
great.
Final result: It broke when he tooks it off the ground
🤣👌🏻
I would have paid money to see that.
That would have justified wasting our time.
Cadê o final do negócio??
No final, quebrou quando ele tentou tirar do chão...kkkkkkkk
Indah sekali
😀👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🥰🇧🇷
Where''s the fing pot?
Queria como fazer a ferramenta para fazer o vaso
Although it never showed the end product, it should have ended much sooner.
this is the most intense making of a concrete planter on YT.
Can't see the inside of the pot.
Can you please give me the measurements ?
Sharp Knife + Toes = No Toes
As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.
Could I give an advice?
Please improve your security methods of work... don't cut any material with you foot so near!
Or use safety shoes...
It's so dangerous... and I mechanic... it means I know a little about it!
Well done... beautiful and exact shape!
Probably a million videos in here showing faster ways to make a nicer bowl.
What type of sand
sharp builders sand, as it holds together better.
Comparison of sand and cement please?
That is a very careless way to cut. It’s an accident waiting to happen
First things you use need to put on screen what size all the tools and name
You did no finish
Verry long time
No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on TH-cam.
Mixing that much water into the cement will weaken it too much- it won't last- great effort though!
But what was it?
supposed to be a pot, it probably fell apart when he picked it up because it was a stupid idea.
Гениально босую ногу использует
Wow. An accident waiting to happen
What was that? Pure waste of time. Where is end product? Why do you make such videos ?
Waste of time. Tysm🙏🏻
रामसजन राजभर
Me fumé todo el video y no muestran como queda?!!!
😂
Чем все закончилось ?(
Они поженились и жили долго и счастливо.
⁹город жоб
watch them toes
Kém
Que
บ😮คึ_🎉จ
Very bad way to end.
Meh.
Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?
What tha fuck!!!!! Watching the whole entire video and there is not result??? This video should be taking out of TH-cam
No sirvió!
still inexperienced - too inexperienced.
watch those toe's.......
Come here, i want to teach you how to make it very simple that you .. 😂
Ну и дерьмище..