The setup was gonna be my comment. It looks like a great saw , but if it takes hrs to set it up especially out on a hot day that would be bad. I know they aren't as mobile but the swing blades that are set up on a log bunk like a band mill just seems more user friendly or at least a lot more simple.
If I understand rightly, you could then with a double cut get a beam 24 inches by what ever the tree can provide? If I am correct this machine would make one great beam and post producing machine!
ok I see all the different blade mills but one thing they don't tell you is how you level off the log . I see the bunkers on the ground but how does the saw make level cuts if its high on one end an lower on other what if ground isn't level . please explain
Dan butcher as every cut is equal to the previous. There is no need to have it level. It only needs to be aligned to the centre of the log before you start as a once of alignment. We don’t turn the log so your requirement isn’t necessary.
ok but if the log is high on one end then the other end when the saw blade goes through the wouldn't be lets say 2x6 on one end an 2 x4 on other end if log was 2" lower or does the blade float
Dan butcher not really understanding you. Blade certainly doesn’t float. The other end of the beam has a one off adjustment to align the saw to the log before milling begins. Everything is then sawn parallel until the end.
Thomas Brenes The guard swings up or is removed to enable a horizontal cut on the left of the log (right side of blade) and a horizontal cut or back cut on right of the log (left side of the blade). This is done in the horizontal orientation.
Thank you for the video. I would love to see start to finish. Setup included.
It would be nice to see you from arrival thru set up and pack up
The setup was gonna be my comment. It looks like a great saw , but if it takes hrs to set it up especially out on a hot day that would be bad. I know they aren't as mobile but the swing blades that are set up on a log bunk like a band mill just seems more user friendly or at least a lot more simple.
If I understand rightly, you could then with a double cut get a beam 24 inches by what ever the tree can provide? If I am correct this machine would make one great beam and post producing machine!
scarmenl yes that’s correct
Good saw mill but how do you cut a big log on slope of about 35 degree with the turbor saw mill?
How does this mill physically (lifetime wear) compare to the Lucas mill?
Cutting reverse order, cut horizontal then vertical
I cant stop imagine if i have one ..how much
ok I see all the different blade mills but one thing they don't tell you is how you level off the log . I see the bunkers on the ground but how does the saw make level cuts if its high on one end an lower on other what if ground isn't level . please explain
Dan butcher as every cut is equal to the previous. There is no need to have it level. It only needs to be aligned to the centre of the log before you start as a once of alignment. We don’t turn the log so your requirement isn’t necessary.
ok but if the log is high on one end then the other end when the saw blade goes through the wouldn't be lets say 2x6 on one end an 2 x4 on other end if log was 2" lower or does the blade float
Dan butcher not really understanding you. Blade certainly doesn’t float. The other end of the beam has a one off adjustment to align the saw to the log before milling begins. Everything is then sawn parallel until the end.
So basically you level the beam to the log not the other way around?
The board is parrellel or straight to the saw blade, not the log. So the boards will be straight and uniform so long as the log doesn't move.
I have a 10inch blade on my sawmill auto worrior can it replace with a 12inch blade
How much. Can you get in Canada 🇨🇦
can I get a link to this equipment because I can not find it on the site?
PeDoberYyy just click on the automated link on our website.
@@TURBOSAWMILL the price
What is the price of this mill
quanto custa essa máquina e qual a largura máxima ela serra
Where can I buy one of these saws and what is the approximate price of one like this?
The only not answered question.
This model starts at Australian $27000 and goes to $62000
Cuanto cuesta esa maquina
Precio por fabor
black poplar?
Yep
TURBOSAWMILL цена
why dont they cut the bottom at twice the depth? would be able to drop the board better would it not?
dale you can do all sorts with the swingblade but no real advantage going deeper in the horizontal cut.
@@TURBOSAWMILL what indian prise
Não tem como eu saber o PREÇO é como posso compra
Price please
Found at www.turbosawmill.com
i had an image of my MIL there for a minute...........
Как работает автоматическое перемещение пилы?!
Je voudrais avoir des infos pour l'achat
Boa noite como a diquiri esa maquina
Boys and girls can anyone tell me how he can cut 24" slabs no problem ?
Thomas Brenes The guard swings up or is removed to enable a horizontal cut on the left of the log (right side of blade) and a horizontal cut or back cut on right of the log (left side of the blade). This is done in the horizontal orientation.
After the first cut it was a bit samey, good bit of kit though.
WOW
Nyan bereih