90's MOULTON BIKE RESTORATION 🚲 PART 2
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- We have acquired this lovely Moulton APB bicycle and will be restoring it over the coming months. In this video Paul goes through our latest ideas and strips the bike down! We would love to hear your thoughts too! Please comment any ideas :-)
You can watch Part 1 here: • MOULTON RESTORATION 🚲 ...
We are Velo Works an independent bike business based in Bristol. We undertake vintage bike restorations regularly in addition to repairs and servicing in Bristol and Hand Built Wheels that we send all over the UK. Also, we LOVE Cycling!
You can find out more about us here: www.veloworksh...
Paul, as you may know, LOVES his Brompton and this Moulton will likely be for Sarah as a collapsible / folding bike.
There are cable guides for both side because these bikes were available with a front derailleur. A front derailleur is convenient when you have 20 inch wheels and can't use a long cage rear derailleur. A 1x system is more fashionable today, but a 2x system is much more useful.
Ah - thinking about it the cable guide on the left isn’t in the line for a front derailleur. And instead is positioned for the extra cable on the rear hub. If you think otherwise let us know ..
This is going to be good! Very excited to see how it turns out; I think a modern, 1x drivetrain is a great idea for this bike. I'd love a Moulton myself so will be watching with interest. Good luck!
Thanks for watching and the support! We are really excited to see how it turns out 👍
Good start look forward to watching the progress. Agreed modern drive train the BB is threaded lots of scope there. I have an original 1965 Moulton Deluxe and a Brompton M6R.
Thank you for watching. Sounds like a lovely bike collection!
Hi Paul,
A interesting project for sure... looking forward to seeing how it progresses...
Take care.
Paul,.
Yes it won’t be quick progress at the moment - probably taking for the respray beginning of Sept but hoping for a great end result. Thanks, as always, for watching 👍
I see now why 1x plans, as no braze on for front deralier
I love taking bike frames to Argos. They come back transformed and it’s going to be great seeing this after the re spray and re build!
Yes they always do a great job! And we can’t wait too 😀
Can you share details of the Argos bike repair / spray shop / whatever please?
I have a long arm Deore rear derail;ier. No issues with it being so close to ground
I'm never happy to see plumbing spanners used on bikes. Just as well you gave it to Argos, they are really good
@@jeremynorth hi thanks for watching. These are high end ratcheting spanner’s that were bought by my grandparents at the start of my bike mechanic career . They’ve been with me over 16 years and are my most commonly used tool especially when working on vintage bikes. They are a must have for any workshop. 👍
no bottle mounts should think about velo orange utility bars to mount cages
Good point 👍
I tried sending links to bars and racks. But didn't go through!@@veloworks9266
Comment below with your thoughts - We LOVE hearing from you
Hello, I just bought an apb. Did you succeed to brake appart the fork ? It is very troublesome for me... Can't wait to see the final result.
Thanks for watching. We’ve been able to take the fork off so the bike is in 4 sections and we are handing it over to Argos Racing cycles for the next part which will be in the next week or so 👍
Great video, looking really great.
What steel is in the APB?
Thanks! A basic chromoly steel not 531
There was a front pannier rack with ability to mount two bottle cages
Are you putting cantilever brakes back on, or V brakes? I swapped my cantilevers for Vees last week, and they're far superior for both adjustments and braking.
Hi; thanks for watching. At the moment we are planning on cantilever brakes. These suit this bike a bit better and means we can get a wider tyre in if needed 👍
U didn't show rear triangle removal,,, i have the same bike which needs low temperature brazing on swing arm , !!!!
There were some seized components so we let Argos do that 👍
What a wonderful project,watching with interest, can you buy these bikes new .?
Thank you 😊 The APB is no longer produced. The current similar model is the XTB which is available from Moulton. Cheers for watching
Thank you for your reply ,like you I have a Brompton which i love ,what work you have given yourself restoring the Moulton anyhoo best of luck with that if anyone good do this project its you and your wonderful workshop.
@@andrewmuirhead86 yes it’s great fun to do it!
Cable connectors…
i own a much later APB which does
Enjoying the videos (wanted to start with the positive 😄), but you do need to normalise your audio levels (both within the video and relative to other content on TH-cam 😅).
Hi Nick, thanks for both comments! I don’t know what normalise means - we do struggle with the audio but thought a better microphone would help? Any tips gratefully received (but must be in layman’s terms as otherwise it’ll go straight over my head 😂). Sarah
Joiner or coupler
Hey Paul, I just received some couplers from Moulton, the label says 'Cable Connector Assembly"
Also colour coded now so can't connect wrong cables together. Originally all black O rings on 'connectors' on all models APB, and TSR, can't speak for AM's and other top models.
Seat post is oversized so too big for a clampon front derailier
We are going for a 1 x 👍
Like I surmised the easy solution to drine train@@veloworks9266
what about bottle cage mounts?
I have a front pannier rack that can fit to b0ttle cages. Most probably not available now!!! Seen some intersting alternative on moulton flickr group@@veloworks9266
have seen a pic with a tsr front pannier fitted@@veloworks9266