Hazard light installation any bike - බයික් එකට ඩබල් සිග්නල් හදමු
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2023
- ABOUT THIS VEDIO
A double signal (hazard) light set for a motorbike typically consists of two bright flashing lights mounted on the front and rear of the bike. These lights are used to indicate that the motorbike is in a hazardous situation or has stopped in an unexpected place, alerting other road users to exercise caution. Here's a basic description:Front Hazard Light: This is a high-intensity flashing light located at the front of the motorbike. It emits a bright amber or white light and is typically mounted near the headlamp or handlebars.Rear Hazard Light: The rear hazard light is located at the back of the motorbike. It also emits a bright amber or red flashing light and is usually mounted near the tail light or license plate.Activation Switch: There is a switch or button on the bike's handlebars that allows the rider to activate the hazard lights. When pressed, both the front and rear lights will flash simultaneously.Flashing Pattern: The hazard lights typically flash simultaneously in a distinctive pattern, such as a double flash or alternating pattern, to grab the attention of other drivers.Purpose: Hazard lights are used in situations such as a breakdown, accident, or when the bike is stopped on the side of the road due to an emergency. They signal to other motorists that there is a potential hazard ahead, prompting them to slow down and proceed with caution.Visibility: These lights are designed to be highly visible, even in adverse weather conditions. They help enhance the visibility of the motorbike, reducing the risk of accidents in hazardous situations.Please note that the specific design and features of hazard light sets may vary between different motorbike models and manufacturers, but this description provides a general overview of what you can expect from a double signal (hazard) light set for a motorbike.
double signal light installation bike,led indicator,bicycle,led turn signal,led,ebike singapore
නියමයි. වීඩියො තව ලග ලග දාන්න. ❤️🔥
Niyamai mchn ❤
Display eke indicat karana vigiyata hadanne kohomada aiye
Fog light ekak haikarana vidiya video ekak genna
Good Job
නියමයි අයියේ මන් ඔයාගෙ වීඩියෝ එක බලලා තමා හදාගත්තේ ❤❤
👍
වැරදි
Poddak udauwak denwada
Pass light ekak gahana hati one
Pulsar 150 hariyayda meka
oke ethkot original Vidiyt signal paththu wenwd double signal swich ek of kalama
Off karama original vidihata signal weda karanawa
Shignl light eke suvich eke danne nathiva hadanne barida
Puluwan
bike ekata RPM meeter ekak hai karaganna hati dannako
Ade aiye ohoma haduwahama pitipasde ekath wada karanawda naththan dana paththata witarada wada
Pitipasseth weda karanwa 4ma weda
@@BikeModify.lahiru hari aiye tnx.✌️
Me athakota pitipasse aka nikamma paththu wenawada
ඔව් වැඩ කරනව
Yathurata poc ලයිට් set karanne kohomada
යතුරු switch ake socket aken gnna
number plate eka usan bracket ekka adana onhda
Ow bracket eka ussana one
E swich එකක් gannakota illanna ona කොහොමද
Handle එකට සෙට් කරන්න පුලුවන් ස්ව්ච් එකක් ඉල්ලන්න
Hazard karama thani signal light ekk paththu wenne ndda ylu
වැඩ කරනව
Malliyo mata on light nathi karaganda oni aluth ct100es model ake
Puluwan math hadala thiyenne
@@BikeModify.lahirumata hadana videya danda puluwanda
Puluwan welawaka call ekak ganna channel eka number eka thiyanawa
Piti passeth light patthu venavatha mehama gehuwoth
ඔව් වැඩ කරනව
Meka paran ct ekata hari yanne ndda
පුලුවන් ප්රශ්නයක් නෑ
Mageth oya bike ekka thiyana
බයික් එකේ කේබල් මාරුකරන හැටි පෙන්වන්න පුළුවන්ද. කේබල් ඔයිල් කරන්නත් ඕනා.
මාත් අහන්නමය හිටියෙ
කරමු ❤️
Pulser 150 awlak nadda ohoma karata
Body control apu nathi ekata awlak na. Buke ake number eka mokadda
@@BikeModify.lahiru BAX
අවුලක් නෑ මේකට සෙට් කරන්න
පිටිපස්සට එතකොට වෙනම මොකක් හරි කරන්න ඕනෙද නැත්තම් ඔතනින්ම පත්තුවෙනවද පිටි පස්සත්
මේ විදියට හදන්න. හතරම වැඩ කරනව
Metro ekata awulak nadd,light කොය්ල්,රෙක්ටිෆයර්,අනම්මනන් වලට බලපාන්නේ නැද්ද ඔහොම ශෝට් කරාම,
කිසිම ප්රශ්නයක් නෑ.
@@BikeModify.lahiru 🔋 බහිනවා නේද පට ගලා
එහෙම ප්රශ්නයක් නෑ
@@BikeModify.lahiru mage eke bassane ikmnta
බැටරිය පරන එකක්ද
🤘🤘👌
පිටිපස්සෙ ලයිට් දෙකත් එක්ක සෙටෙකම එකටද තියෙන්නෙ අයියා
ඔව් හතරම වැඩ කරනවා
Honda cm 125 twin එකකට ඕක සෙට් කරගන්නෙ කොහමද
ගොඩක් bike වල සිග්නල් වයරින් එක. එකම විදිහට තියෙන්නෙ. Twin එකෙත් සිග්නල් ලයිට් වලට යන වයර් දෙක හොයගෙන මේ විදිහටම set කරන්න. ප්රශ්නයක් උනොත් ඕන වෙලාවක call එකක් දෙන්න.
❤❤❤❤
Bike eka start karapuwahama sigmal light blink wenne nane
Mokadda bike eke
@@BikeModify.lahiru cd dawn
Ekata ehema aulak na. Hada ganna amarunam call ekak denna
@@BikeModify.lahiru nombare
0762929271
පිටිපස්සෙ ලයිට් දෙකත් වැඩද
හතරම වැඩ කරනව
Pitipasse light tika
4ම වැඩ කරනව
අයියෙ බැට්ටිය වැඩ නැ . එත් ඔක හදන්න පුලුවන්ද
පුලුවන්
Issaraha wageema piti passath wada karanawad👀
හතරම වැඩ කරනවා
ඉස්සරහ nomber plate එක ඉස්සුවෙ කොහොමද කියහන්කො
Bracket එක හදන්න ඕනෙ
@@BikeModify.lahiru ඒක හදන විදිහ video එකක් දෙන්න පුලුවන්ද
එහෙම + දෙකටම දුන්නට ලයිට් වලට කරන්ට් යන්වද ඉන්ඩිකේට් වෙන්නෙ කොහොමද. එක වයර් එකකින් කරන්ට් ඇරන් ඒකෙන්ම අයෙ එනවද ලයිට් එකට🙄
ස්විච් ඒකට වෙනම කරන්ට් අරන් නෑ. ඔරිජිනල් එන ලයින් එකෙන්ම තමා දෙකම කනෙකට් වෙන්නෙ.
අවුලක් තියෙනවනම් ඔනේ වෙලාවක කෝල් එකක් දෙන්න
Thani paththa danna barid ethakota
Puluwan switch eka off karama thani paththa weda karanwa
Aiya number plate eka usane kohomada
Bike ake bracket eka udata harawanna
@@BikeModify.lahiru Hara head light eka bracat ekada usane onh
Number plate eka set wena bracket eka
@@BikeModify.lahiru Eka anith patha haravalath enna nh ne
Photo ekka ema nadda
හරි ගියෙ නෑනෙ
Mokadda bike eka
අනෙ අයියෙ නමිබර් එක දෙන්නකො❤
0762929271