Expander Cycle Rocket Engines - Using Waste Heat To Drive Your Rocket
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2019
- Another installment of 'Things Kerbal Space Program Doesn't Teach' - explaining the expander cycle rocket engines in more detail. Expander cycles use the waste heat from the combustion chamber and nozzles to boil liquid hydrogen and power the turbines. The main advantages are cooler, less chemically active turbine environments, but if used in a closed cycle design the total thrust is limited.
Most of this material is at a pretty high level, I'm not a rocket scientist, I only play one on the internet.
Most of the flow schematics are taken from this excellent article by William Green
blogs.nasa.gov/J2X/2014/03/24...
I also took some o
ntrs.nasa.gov/archive/nasa/ca...
Also, Emre Kelly's story on the Dragon capsule RUD
www.floridatoday.com/story/te...
John Kraus's Delta IV photo is available from his site:
www.johnkrausphotos.com/ - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMSL SEA GF D2 | Summer | ร่วมส่งแรงใจ เชียร์ไทยไปพร้อมกัน](http://i.ytimg.com/vi/dN2gLsCJ0T0/mqdefault.jpg)
I worked building RL-10's back in '89-90 when they were developing the improved thrust version that has the moveable skirt and they really ran into problems. When you increase the fuel flow needed to increase the thrust the skirt cools down which then reduces the expansion which slows the pumps. It's a really delicate balancing act on the early engines and the first attempts to increase the thrust did achieve more but they lost impulse which is no good for a second stage engine. The nozzles supplying fuel and oxygen in the 'shower head' were flowed then carefully adjusted by hand to get exactly the flow needed which was a bit tedious and often took many trips to the flow test to get it right. Happily things were worked out and the engineers at P&W were and still are the finest in the world.
Thanks for the bit of history! It's always interesting to get a measure of historical insight from the people who were there.
Sounds like a great example of why heat exchanger design is the bane of most mechanical engineering students!
Would this be such simpler nowadays with simulation? I've heard it's still pretty tough to get usable results sometimes
Love having professionals chime in!
Was the moveable skirt design actually patented by PWR ?
Curious as to whether the Vinci engine has to licence the technology...
I feel like you made this video to answer my questions. Thank you very much, it's great.
Hey Dustin! Nice to see you watching Scot's videos!
hello destin!
I love how Elon, Tim, Tory, Destin and Scott just have a casual discussion in rocket engines on in some tweet reply chain of something unrelated.
Tory is a really underrated CEO. He replied to me three times on Reddit. He seems to be genuinely nice person.
@@Bartekkru100 in the Destin video, you could see him and his wife standing next to the Delta Heavy and talking deep rocket science. Can't wait for Vulcan to become a 21st century rocket.
DC-X was a 'first stage' that was lifted against Earth Gravity, using 4 RL-10's!
Another cool idea is to use an expander cycle with an Aerospike nozzle. This would supposedly give some more nozzle area so the total expander cycle engine could have more thrust than with a de laval nozzle (it would 'scale' better).
I forgot about that one.
@@scottmanley Can you please do some more on the different engines ? Including this aerospike?
This topic looks like an great pool of content!
an aerospike needs a lot of cooling so it might be more practical
AGREED to the different mozzie geometry video idea! De Laval was an awesome hydrodynamicist, but his design is one of many!
Heck, a video on just the differences between a plug and aerospike nozzle would doll your time.
I like the spike. One of the early complaints was that the external nozzle materials couldn't hold up against the heat well. That was before the new advanced materials research that gave us the heat shield tiles of the shuttle. There are a lot of great ideas that got put on a shelf that would do better a second time around.
This was great, please do more of these more in-depth videos on other cycles, other engines, and other space tech stuff.
Hell yeah! More technical as well!
Not going to lie, I had to back up and replay parts of this video a bunch of times - but it was really fascinating! Thanks for the introduction to Expander Cycle rocket engines!
Thank you Scott for talking about a great Engine like the RL-10, but Sorry Scott RL-10A5 used on the DCX and DCXA launched many times. I worked on the engine test program from 1991 to 1995 for P&W. You also didn't note that the RL-10A5 was very throttleable from down to 5% to 100% in less than 3 seconds, This is why it was selected for the CC program to land on the Moon. Most likely will be again just a modified Aces engine RL-10C-5. Best regards Ed.
Thank you for the engine, it made my late game Moon and Mars landings an efficient breeze in KSP with Realism Overhaul. :) The only other option was the Lunar Descent Engine and its questionable efficiency.
Did you work at the so Florida R&D center? I had family that worked there.
On the drawing pressure was in psia and temp was in R, can you please explain these?
@@marksmovies6191 psia is pounds per square inch absolute. 0 psia would be a vacuum as apposed to psig where 0 psi would be atmospheric pressure. I don't know about R. :)
Ed, did you know Bill Adair, who also worked on rockets and jet engines for P&W?
I wish I understood 3% of what you're saying, but it's absolutely fascinating. Okay maybe I understand 3% but I love how much detail you get into. Thanks again, Scott.
Really looking forward to Japan’s LE-9.
5:38 when you see this after Simple RL-10 schemat
Only 90s kids will understand
If you look closely, you can faintly see the outline of what looks like a nozzle.
Isnt that the Mueller Report?
I wasn't ready for this yet
Yeah, uh, how is anyone supposed to _read_ this?
Cryogenic H2 & He ... In another life I use to service vacuum pumps and systems. The most unusual pump I had to service (for the first time) was a cyro-pump using liquid helium in a "cold head" that's purpose was the condense and freeze all the residual gas left in the vacuum chamber. The liquid helium was produced by the system and there was a "temperature gauge" to indicate when the helium was cold enough to liquefy. How this was done was with SS sealed system pipe system with pressure gauge and a small bulb in the cold head and was filled H2 at 7 bar.
The pressure gauge scale wasn't in pressure, rather it read the lower end of the Kelvin scale. The idea was that as the temperature dropped to cryogenic levels so did the pressure. The gauge needle would sit there doing nothing and then would slowly drop to 14K at which point the H2 would freeze in the bulb. The pressure would still drop past this point as more H2 condensed and froze. From memory the low end of the scale was 4K which is the temp of LH2.
The reason for the service was they opened the connection to the gauge and let all the H2 out so it didn't work as it should. All I had to do was evacuate the system, fill with H2, evacuate again to and then fill to 7bar. The client was very surprised that it was so simple to fix and they just paid a lot of money for me to do something they could have done.
Its the old story - "you're not paying me for turning the screw; rather you're paying me for knowing which screw to turn." haha
I work with a machine that uses a cryo pump, it's a wonderful combination of a stupidly simple concept (let's make a vacuum by freezing all the air solid) that requires crazy hardware. It still blows my mind a little seeing that temperature gauge casually ticking over at 10-15 Kelvin.
Nice one Scott !!!! super informative !! extremely high KTT ratio (Knowledge To Time). loved it ...
Just w8 for the day this chanel hits long deserved 1 milion subs
jeez I have been here for a long time. Still remember the heated debates of how to pronounce Mün.
It's close...
It also says something about people’s interest in space!
@@Azivegu :o)
@@Azivegu I got you beat. I been here since he uploaded a legendary video of his daughter playing Eve Online (A game known for it's merciless learning curve) as a pirate and wasting people. Before KSP he played EVE.
Idunno what Bob Ross was doing in that web page but now all I can think about is adding a 'happy little rocket' to the background of a painting.
..Maybe some ejecta from stage-sep
.. Little sun glistening off the main body
.. and a slightly broken con-trail
best I can do is that he was Air Force....didnt work on rockets though
there are no explosions, just happy little RUDs
Flat
It's a play on the title "art of the expander cycle engines", there is a link in the description :)
Tap-tap-tap.
The RL-10 is my Realism Overhaul vacuum engine of choice!
I always find myself using the “Russian version” due to it being lower in the tech tree
Yah I use it and it's Russian equivalent a lot in RSS.
I don't use it much I find, usually because I tend to get cost-obsessive in RO games, and RL-10s are great but cost an assload. They're damn fine for probe transfer stages though, as long as you insulate it well.
@@Patchuchan RL-10 for the win
Those were some cool (or maybe hot...) new expander cycles I had not seen before. Thanks for some rocket design with my morning coffee!
I haven’t really payed attention to your subscriber count for a while and I still thought you had like 25000. Now you have 860,000!! That’s insane. Good job
I love expander-cycle engines. It's just such an elegant concept.
Thanks for expanding my knowledge on this subject!
One of the best channels on TH-cam. Keep up the good work.
Thank you for explaining that. I did know that limitations in the Closed system were due to cube-square law, but it is nice to refresh memory.
6:18 You forgot about the RL10A-5 wich flew on the DC-X wich was used in atmospheric conditions
6:00 Scott is surprisingly confident in our knowledge of the rankine scale.
That's the first time since Uni that I've come across Rankine being used, and then it was because I was too cheap to buy aerodynamics textbook and checked out the old imperial edition for non-stop 3 years (nobody else ever requested it).
Love your videos as always! I would love to see a video about the combustion tap-off cycle. As a thought, I always wondered about a combustion tap-off cycle that uses an external starter such as an electric motor to get the turbo pump spinning before the rocket launches. I figured that starting such an engine would be extremely simple. Get the turbo pump spinning, ignite the pyros, then open the propellant valves and the engine will start and be able to run on its own. An overrunning clutch will automatically decouple it from the electric motor once the engine fully ignites, and off it goes!
I love learning from you, Scott. Your voice is like my light in the dark.
That blog post, and the follow up NTR post, are PURE GOLD Internet manna!
Hey Scott Manley. If it were not for you I would never know about staged combustion closed cycle rockets! Love your channel Scott. You are the best spokesman for space exploration I have know in my 69 years. Keep it up. I have a PhD in Chemistry and learn new stuff from you daily.
I’m sure you could teach me a lot of chemistry.
I could not teach you a thing about rockets but in our labs at UT Austin we did not work on anything that wasn't pyrophoric. Imagine metals at 3000 deg C with liquid nitrogen cooled flasks.
I appreciate the new Starship models behind you )
Yeah I really liked those as well.
Thank you Scott, 99% of that just washed over me and did not stick, we really enjoyed it, and that 1% is a lot of new knowledge, you could easily win the Galactic Institute's Prize for Extreme Cleverness. It is amazing that the most tech heavy industry relies on kit and ideas that are decades old.
The best space channel on YT
4:10 that cut out gives you a view of how intricate and technologically advanced these engines are. And apart from spacex all these are thrown away after one use. 🚀🗑😱
thats an oxidizer turbo pump
@@motoboggin2619
The little impeller on the left is the LOX pump. You can see it's driven slower than the fuel impeller from the gearing. The two-stage LH2 pump (centre) spins at turbine RPM.
The turbine is at the bottom. The turbine on RL10 spins at about 30k RPM.
Yeah i did understand (watching the video) that it was the pump section but still it is impressive and expensive and an important part of the engine that is discarded. 🧐🧐
Like Isaac Arthur says: The reason space is so expensive is we're throwing away our car after one trip and buying a new one, rather than just refilling the gas tank.
That's actually really simple, compared to just an engine, let alone a rocket.
And the Japanese are going with the (Open) Expander Bleed Cycle for their rocket engine LE-9, which solves the limiting thrust problem of Closed Expander Cycle, so it can give high thrust while also reducing complexity and cost albeit at a less efficiency.
But the superiority(by power) yet low cost n simplicity of it is unmatched by other expander engines I believe.
(I had made this comment without watching the whole video completely so I thought he missed LE9 of Japan when mentioning others earlier in the video.)
I like how the Rutherford engineer upper stage has two batteries one ejects when drained reducing the total weight to SECO down just a wee bit.
Your going to need all the efficiency you can get with a 17m tall rocket.
I love how you set up your Delta 4 and Atlas 5, while talking about their glorious upper stage and the engines that it uses.🚀👌🚀👌🚀
I hope the day will come when we look upon this technology as being antiquated and quaint kind of like steam locomotives.
Norman Mattson
Allow me to add on to that
I hope most of us live to see that day
That day may never come. It's possible we're stuck on Earth with chemical rockets forevermore.
That day came and went when they got NERVA to work and then canceled it.
@@General12th > It's possible we're stuck on Earth with chemical rockets forevermore.
It may even be possible that we're eventually stuck on Earth but without rockets, for all resources required to make the fuel and special materials are exhausted.
@@vladimirdyuzhev That's unlikely. Rocket fuel can be made from water, or carbon dioxide, and the only time those are gone is if the Sun has consumed the Earth and we're all dead anyway.
Hey Scotty! thanks for beaming me up again!!
I LOVE THAT SHIRT! EXCELLENT CHOICE YOU HAVE GREAT TASTE!
I'm amazed that after so many years that rocket design hasn't settled on a few basic designs that everyone uses. It shows that rockets are still in their infancy and have a lot of improvements yet to go.
It can also mean, that people want more tools for the growing number of jobs.
Technology advances, new manufacturing methods and materials make old, previously discarded ideas relevant again, changes in prices make other ideas irrelevant.
It is true that rockets haven't settled on a few basic designs, and there's probably a lot of improvement to go, but a major part of this is just that different rockets and designs are optimal for different things. Do you want a cheap engine? Do you want high ISP? Do you want high thrust? Do you want easy reusability? Do you want high reliability? Is this for a large rocket or a small rocket? These are many of the different things and depending on the desired goals, different cycles will be better.
The RL-10 is about as standard as it gets for rocket upper stages, and at this point it basically writes its own resume. What's there not to like? It's efficient, cheap, and simple.
By that reasoning the ICE engine is in it's infancy instead of coming to the end of it's life.
Curious Marc sent me here but I'm already an avid subscriber. Somehow I missed this video in 2019. I now understand rocket science. There should be a pin or something.
I now have a 6" Newtonian on an Equatorial with a clock drive. I'm super exited! :D
in my office at work i have that F1 @0:52 engine turbopump assembly cutaway hanging on my wall 36x24.
great conversation starter
It is truly amazing how something so impossibly complicated is made to seem trivial.
Great video as always. Thank you very much.
A very good video... Keep teaching us.
Here from Curious Marc channel. Great explanation!
Can you do a vijeo on modern solid rockets? All this edumaction on liquid rockets makes me realize that they must me more complex than I've thought about...
I really enjoy this channel
Now that answered my question of of tubes wrapped around the engine bell of many rocket engines. Thanks scott manley
I am more than amazed when I saw the Chinese subtitles. AWESOME
Your voice sounded great on the intro! New mic, or configuration? And do you think Kerbal 2 will be that much better? I mean the laws of physics remain the same, what could be taking them so long to establish?
The rl 10 is a workhorse of an engine logging so many flight hours awesome look into how it works
Would it be possible to have an open/closed hybrid expander cycle engine? That way you could run the engine in the open cycle configuration when more thrust is needed, and in closed cycle config when the thrust is not required, so that you can take advantage of the higher efficiency.
Rik Schaaf was wondering the same thing. Would be beneficial for ULA because if you look at their launch profile, they do thrust off-optimal to compensate for it’s low thrust while they try to achieve orbit. Imagine your solution where they can transfer over once orbit is achieved and gravity losses are no longer a problem!
Well these all seem a bit better then some of my concepts but I remain confident.
Although my current prototype was quite promising. Due to refinements in the design and upgrading the rotational power distribution packages I have dramatically improved efficiency. This has allowed me to eliminate 3 of the 7 guinea pi........ engines. This in turn gives me better balance, allows a reduction in lettuce...... fuel and reduces the overall waste produced by the 4 remaining engines. I will continue to be inspired by my hero Ralph Kramden. I too just want to send my loved ones to the Moon.
There's beauty in every cycle type..
I thought I was pretty sharp with propulsion with a career in business and some military aviation. Space technology...how hard can it be.? Well you just crushed me with this one. Thank You. I needed a come-uppance. 😉
Great video!
What perfect timing. I was just thinking about that...
Also FIRST!!!
tl;dr: Expander Cycles are the rocket engine equivalent of Pulling Yourself Up By Your Bootstraps
:D
IIRC the RL-10 was used on DC-X and was also planned for DC-Y. So it WAS used as a liftoff engine.
I always feel smarter after I watch one of your videos. :)
Actually the longer I watched this video the dumber I felt. This is so far over my head its not even funny.
Just watch it again....
@@scottmanley Your too kind.
What a concentration of knowledge here, both by our safe flyer and commenters.
your "fly safe" at the end gave me threat vibes 0-0
Great content. Thank you!
Man, I feel really pumped up right now, I'm going to buy some Estes rocket motors and build a multi-motor crazy albatross rocket and see what happens! 🚀💥🔥
greetings. very good. explained very well. success.
Scott: ...neutral hydrogen gas...
Hydrogen embrittlement: what am I, a joke to you?
You are nothing compared to oxygen free radicals.
Awesome video
Scott, if you ever make it out to Utah (my home state) you need to go out to ATK and experience the booster rocket tests!
I love this kind of video’s, educational and entertaining
I love you Scott, your the best space youtuber, I wish I could travel to the US to meet you
trm me too
Dude, your shirt is awesome!
Ah, the smile in my face when I saw 14m43s of video!
Hey Scott, another great video!! Thank for sharing. Had a question... wondering if you know what kind of setup would be most efficient for a nuclear fueled rocket engine? I imagine a nuclear fueled rocket engine would be powered and or plumbed through the combustion chamber and or nozzle using a completely different style “pump” system than explained in this video to plumb the fuel out of the nozzle to generate thrust but I was wondering if you have a video on this or could explain how this would work. Thank you in advance and as always, thank you for sharing. I’ve been a fan for a while now and appreciate all of the time you take to teach and inform the public. Fly safe!
The engines developed under the NERVA project used a bleed expander cycle.
Ya! new educational rocket video.
6:00 It's good to see the Rankine Scale used every once in a while...
I used to learn a pretty interesting expander cycle engine design. In this engine, the pump is driven by helium in a closed system. The helium is heated by combustion chamber and then dirven the pumps of liquid hydrogen and liquid oxigen; then the helium is cooled by the tank of liquid oxigen. It was proposed by PWR and called EX-Hex cycle engine. This design could also be applied on methane-oxigen engine.
What I would love to see would be a paraffin hybrid rocket driven by an expander cycle, since you only have to pump the oxidizer, you could get higher mass flow rates, and if you used the turbine exhaust for film cooling of the nozzle extension you could pull more energy out of it (i.e. have a lower turbine exhaust pressure). Also, since the combustion chamber wall is insulated by the fuel, you would only have to actively cool the nozzle which could allow for larger engines that are still on a closed, or partially closed cycle.
I wish to hit the thumbs up every time I wach this but not allowed... So here it comes right here 😁👍👍👍👍👍... Thanks for educating me 👍👍
That T-shirt is so cool. I wish I could buy one.
Scott, If the Draco engines prove too dangerous for a crewed capsule what realistic alternative engines are there to replace them? Thanks for a great channel!
I need to watch this again.
Great show ! Very interesting but not new to me as I was member of a hotair balloon team an those burners use expand cycles since ever.
Is the RL-10 the engine that whistles at 80,000hz? And damaged a payload back around 2009?
I'd like to see you do a video on the Aerojet M-1 rocket engine, especially if you can visit where the parts of the unfinished prototypes are. It had a unique solution to the efficiency loss from dumping turbopump exhaust at low pressure. Make the pumps extremely powerful so their exhaust is at high pressure then duct it to a ring of nozzles at the bottom of the skirt where they would produce a few thousand pounds of thrust instead of no thrust like other open cycle engines.
00:11:30 Those units are a blast from the past.
How do they keep the boiling liquid from creating massive back pressure, or simply locking a check valve closed?
I wish he would also talk about the specific impulse or exhaust velocity of the engines as well as thrust.
Great video. Why not have other videos focusing on the other types of engines. The gas-generator cycle and staged combustion cycle.
Scott, you know the stuff
Hey Scott, in all this time almost no-one talks about catalyst converters in mono-propellant engines, such as the catalyst pellets depicted in the diagram of Redstone's steam turbine. Think you could an episode on that? Like, exactly is it? What is it made of? What is the chemical reaction taking place? Is it the same thing that makes the bubbles in my contact lens solution, etc. That would be cool.
Suppose we have an expander cycle engine and scale it up by a factor of two keeping the chamber pressure the same. Then the throath area becomes 4 times larger and so does chamber wall area.
With the same chamber pressure the LOX/LH flow (kg/s) becomes also 4 times greater. But then we will have 4 times bigger area to warm the 4 times bigger amount of LH to turn the turbine and there does'nt seem to be any problem.
So why don't we get bigger thrust by scaling?
My own solution (not quite sure if its correct) is that we need to take into account the best optimazation of the engine:
Burning 4 times more LOX/LH does not need 8 times bigger combustion chamber, which would be the volume after scaling everything by factor of 2. It only needs to be 4 times bigger, and in that case the chamber wall would not have 4 times bigger area, but only 4^(2/3) bigger. So not enough are to warm the LH for the turbine.
The Vinci engine clearly has a longer chamber than the RL-10 to counter this effect, but increasing the camber size too much might ultimately mean a too big weight penalty.
Comments please.
Hi Juha--What you are saying is incorrect. If you double the engine's linear dimensions (which is what I think you're saying), then the throat area becomes 4 times larger (as you said) and pumping the propellants requires 4 times the power. But your statement about the chamber wall area going up by four times is not correct. It only goes up by 2 times. The throat area goes up by the square of the linear dimensions, but the cooled chamber area only goes up linearly with the chamber dimensions. So as we make the engine larger at constant chamber pressure, the required pump power goes up twice as fast as the thermal input power. This is why expander cycle engines have an intrinsic thrust limit.
Hi Scott Manley, I wonder if/when we will see the Aerospike engine in use? Thoughts?
Hi I was wandering if there has ever been a idea to use magnetic constriction to adjust the nozzle geometry?
Yes, but not on chemical rockets. It is in the works for some theoretical plasma/fusion engines though.
Scott, you're a computer programmer. I know that takes smarts, but how in the world did you teach yourself the complexities of all this rocket science? I'm amazed at your level of knowledge! Very impressive!
hey scott
can you link your rocket models somewhere?
im interested, maybe you said it sometime somewhere but i cant find info on it...
thanks and of course fly safe
Expander Bleed Cycle is just another word for, "turbo waste gate"... CHANGE MY MIND!
SHHHHHHHH TU tut tu tu tu to space!
@@onogrirwin ?
@@charadremur333 look up videos of the soud of a overturbo charged engine with a waste gate. shhh is the turbo noise. "TU" is the waste gate
The expander cycle was used as a first stage on the SSTO Mcdonnell Douglas DC-X
Scott is amazing :)
I have an idea! We should pre-mix the oxidizer and fuel in one bigger fuel tank to reduce the complexity of the rocket designs! Less tanks, fewer moving parts, more fuel!
What could possibly go wrong?
Hey we should do that with hypergolics
Ka...BOOM!
@@awuma Wait, is producing a constant Ka...BOOOOOOM at the bottom not the goal?
I know your joking, but they also have different storage temps to lower bulk
Are there any good books on rocket engines... written for the lay person? I've read some of your other recommended books and loved them, but I'm still at a loss for understanding rocket engines (besides what I've learned from your great videos). Thanks, Scott!
5:32 - _Powered_ the space shuttle, unless they pulled them back out of the museums while I wasn't looking.
_Popped up a Bob Ross video in the other tab, ready to run when Scott is done._