Today is My BE Ist sem exam.And i have studied the entire subject from this channel.I used to think its quite hard to study this subject but you changed my Mind and all of my concepts are clear now by watching the videos here.Thank You sir
Hi Arjun....Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference
I'm completely ready for my sem1 examinations sir...! Thank u so much for all Ur engineering drawing tutorials! All are really excellent! I really appreciate your teaching and we r expecting more tutorial videos from u sir😍 thank u once again!
Hey Nikhil.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
This video really helped me a lot. (Use of AutoCad for explaining rather than a drawing book is great idea) Thanks a lottt for creating such content its almost the end of my fe sem2, this video cleared my concept :) a huge thumbs up sir.
sir one question is that why we had drawn the true length separately .....why the front view we draw earlier doesn't represent the true length of the slant edge????????????????? plz replay.........
Hi Gajendra.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
Sir your video is very helpful for studying....nice work sir...do more videos like this.😊you get more blessings from God for your work...thank you so much.your video is easily understandable..
Every thing is good but they had no given the height of the pyramid... How can we draw a pyramid without knowing height... Since you are doing in PC the image will be there.. But how can we draw it on paper???
Vikas.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page..... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....
@@ManasPatnaikofficial Your videos are really good sir,but sir you dont clear the doubts asked in the comment section although you encourage us to ask doubts in the videos.Please try to give some of your precious time in doubt clearance,that would be a greater help sir.Thank you .
You are welcome Heefa... Thanks for appreciating the content..... All the best in life........ Do watch all the content thats useful to you and also encourage your friends to subscribe to this channel for top notch learning...
Thanks for appreciating man......... Ya sure i will put that up in my "to do list" All the best...... And do encourage your classmates to subscribe to this channel so that all can learn Engineering Drawing in the best possible way.......
Sir i have a doubt that there didn't mentioned the distance or angle from co planar axis to a¹, b¹&c¹, d¹.. Sir how u drawn it without mentioning the distances.. And why you projected 3¹ to co planar axis.. Plz respond and give me answer
Hi Apil..... I am sure that these videos are helping u learn... Keep watching and do let your friends know about this channel so that they can also benefit................
Manas Patnaik ya sure I will recommend this video..this made me quite easier to understand...plz add the hexagonal pyramid with top view after cutting the plane😊😊
why you are making arc for c and d by making length on the line which does not shows true length but for a and b you are doing it by making the line of true length why??????????
Sir how are you adding text so quickly in autocad?. I want to know how are you doing it. My exam is in autocad and it takes alot of time in adding text. Please tell me how to do that
Hi Anuj......... I am sure these videos are helping you learn the concepts... All the best and do let your friends know about this channel so that they can also benefit.....
no man only two edges are seen so it can't be true length... if 3 edged age seen then it would be true length,third edge passing perpendicularly down from point O'
Hi Girja.....First of all....Thanks for appreciating my work.... I always focus on giving you guys excellent quality free education.... All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit.... Thats AutoCAD old version...
Manas Patnaik OMG! dear sir, autoCAD is a paid app!!! how can i get it for free? sir i am from Jabalpur, Jabalpur Engineering college,1st year.... but please tell what should i do to get autoCAD?
Manas Patnaik OMG! dear respected sir, autoCAD is a paid software! please tell me how can i get it for free? i am from Jabalpur,MP. Jabalur engineering college., 1st sem. but please, do tell me how can i get it for free?....
Thanks for appreciating my work. Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html 2. Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html 3. Projection of Line: OLD: th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html NEW: th-cam.com/video/pzE0D-Ijxd4/w-d-xo.html 4. Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html 5. Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html 6. Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html 7. Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html 8. Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html 9. Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html 10. Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html 11. Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html 12. Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html 13. Involute: th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html 14. Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html 15. Complete Engineering Drawing in one single Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html 2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html 3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html 4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html 5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html 6. Scales Hindi-Urdu: th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: th-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html 2. Friction: th-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html 3. Shear Force and Bending Moment: th-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html 4. Trusses: th-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html 5. Centroid and Centre of Gravity: th-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html 6. Moment of Inertia: th-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html 7. Dynamics: th-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
You are welcome ashok... Do watch all the content on drawing and mechanics..... And do tell your friends about this channel so that they can also benefit..... All the best
Hi Dheepa......First of all....Thanks for appreciating my work.... I always focus on giving you guys excellent quality free education.... All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Today is My BE Ist sem exam.And i have studied the entire subject from this channel.I used to think its quite hard to study this subject but you changed my Mind and all of my concepts are clear now by watching the videos here.Thank You sir
Hasheem, I am glad to know that my lectures have benefited you,
And i am sure u gonna do excellent in exams......
All the best man...
God Bless....
Your btech might have been done now😅
@@_thepoeticbubble It is done😀
bhadwe tujhe auto cad hai phir bhi rora, hamein paper pe banana hai madarchod nemesis prime
You got placed?
such a professional way of teaching , really really appreciate your work....not even our IIT professors could teach better than you.
This who are watching in 2020 carona time 🤞😂
Meehhh😂😂
Your videos are so helpful sir and I always recommend this to my friends .never afraid of exams just because of your videos...sir
Hi Arjun....Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
👍👍👍👍👌👌👌✌️✌️✌️
Its 2024 and your videos are still amazing thank you so much sir🎉
manas, your videos are the best, you really help thriving engineering students like me with drawing, keep up d good work
This guy made toughest into simplest,hands off
I'm completely ready for my sem1 examinations sir...! Thank u so much for all Ur engineering drawing tutorials! All are really excellent! I really appreciate your teaching and we r expecting more tutorial videos from u sir😍 thank u once again!
All the very best
Stay blessed ☺👼
Really good sir!!Taking time and patiently explaining each and every step.Hats off to you!
Hey Nikhil.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
I have exam today and I used Sir's channel for last two days ,I understood everything just a bit nervous hopefully I will do well
Architecture just got easier thanks to you
You explain it very simply to understand
Thank you 💓💯💥
You're welcome 😊
Sir your teaching is very nice👌👌👌
No words this was phenomenal❤👌👌👌
This video really helped me a lot.
(Use of AutoCad for explaining rather than a drawing book is great idea)
Thanks a lottt for creating such content
its almost the end of my fe sem2, this video cleared my concept :)
a huge thumbs up sir.
Thanks Prathmesh for appreciating my work..
All the best and do tell your friends about this channel so that all can benefit...
How do we know where to take 45° angle if the figure isn't given?
Ohk . But how are we supposed to draw the part P? What are the measurements?
sir one question is that why we had drawn the true length separately .....why the front view we draw earlier doesn't represent the true length of the slant edge?????????????????
plz replay.........
This is addressed at 4:52
because if u see the front view the triangle is inclined at some angle .so,obviousely the lengths gonna diminish
@@techhackz2897 ohh. i was confused too.
very good explanation thank u very much
Thanks Vamshi for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
This is very help full for me....Thank You Sir
Hi Gajendra.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page...
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Sir your video is very helpful for studying....nice work sir...do more videos like this.😊you get more blessings from God for your work...thank you so much.your video is easily understandable..
Every thing is good but they had no given the height of the pyramid...
How can we draw a pyramid without knowing height...
Since you are doing in PC the image will be there..
But how can we draw it on paper???
0:38 Check the top of the video.
Nice it will help many students like me
this is awesome it helped me allot.
thank You so much
Vikas.......Thanks for appreciating my work....
All the best in life
I have also started making lectures on engineering mechanics
Do check it out on my channel page.....
Do share and recommend this channel to your friends and classmates so that they can also benefit...
Cheers....
Manas Patnaik thank you.. Sir
The videos are too helpful..
I am thankful to u sir
@@ManasPatnaikofficial Your videos are really good sir,but sir you dont clear the doubts asked in the comment section although you encourage us to ask doubts in the videos.Please try to give some of your precious time in doubt clearance,that would be a greater help sir.Thank you .
thankyou .. your video was very helpful to me really
You are welcome Heefa...
Thanks for appreciating the content.....
All the best in life........
Do watch all the content thats useful to you and also encourage your friends to subscribe to this channel for top notch learning...
your literally saving my ass from my caed teacher who hates me thank you manas for making caed a piece of cake
Really appreciate your efforts
Thank you so much sir,.. I was the most joyful person in the world once I say u explaining this topic
This is very helpfull for me thanks sir ☺️🙂
Sir this has been really helpful. so can you do it for oblique pyramid too?Cuz in exams they don't asks this cuz its comparitively easier.
Thanks for appreciating man.........
Ya sure i will put that up in my "to do list"
All the best......
And do encourage your classmates to subscribe to this channel so that all can learn Engineering Drawing in the best possible way.......
Sir i have a doubt that there didn't mentioned the distance or angle from co planar axis to a¹, b¹&c¹, d¹.. Sir how u drawn it without mentioning the distances.. And why you projected 3¹ to co planar axis.. Plz respond and give me answer
Sir What's the axis length.....as we have to draw front view frm top view....
Bhai top par diya hua hai 40mm
Thank you for this. I have my paper tofay an di wasn't really vlear onnyhe topic. I'll write and bring back feedback.
All the best
Thanks sir so much ! Really amazing video 👏👍👍
Superbly explained indeed great help... 👍
This is very helpful thanks a lot
+Yasantha Wijebandara
You are welcome....
All the best
And do let your friends know about this channel so that they can also benefit
Its nice...but plz make top view part also..it will make easier for us
Hi Apil.....
I am sure that these videos are helping u learn...
Keep watching and do let your friends know about this channel so that they can also benefit................
Manas Patnaik ya sure I will recommend this video..this made me quite easier to understand...plz add the hexagonal pyramid with top view after cutting the plane😊😊
Thank you so much sir u r great😊😊 this is really very helpful 😊
Why do we need to draw a curve from centre and radius 31.why is it necessary
This video really helped me out. Can you please tell me what software you used in this video ?
Query:-
What is the angle and distance from the axis where the triangle is cut? isn't given.
Please solve one for complete surface development of triangular base pyramid too
Please make the same video on oblique solids
In this question , how we know about the altitude of square pyramid.. the question also haven't mention about its length .
Hello Manas, may i ask you on helping me solving a specific surface development problem?
Send me the problem description
Sir i have a doubt . You can draw solution also in the question using square pyramid diagram but how I can draw sol in exam hall
At what height is the plane cutting the pyramid??
Sir make one video on development of tetrahedron .
ya sure
How to the same process with an oblique pyramid the apex not at the center
Thank u Soo much sir. It's really helpful ..
Sir,I'm one of the fans of yours.Could u please upload INTERSECTION OF SURFACES.
Sir, can you please tell me what software you used in this video
Sir axis se kitne height pe angle lena hai? Plz tell sir.
Sir can you tell me height in which the axis is cut???
why you are making arc for c and d by making length on the line which does not shows true length but for a and b you are doing it by making the line of true length why??????????
Sir why o'a' in the front view cannot be the true length of slant edge
Sir please draw for pentagonal pyramid resting on one of its side on HP
That was really helpful Sir
Sir how are you adding text so quickly in autocad?. I want to know how are you doing it. My exam is in autocad and it takes alot of time in adding text. Please tell me how to do that
Sir do some difficult problems
I am watching it , even in 2021,
Sir u are not considering the base why
Sir can u explain how can we get slant edge of the true shape
I didn't get u 🤔
Why is true length necessary ?
Ur video are really good..... excellent.....the only problem is that ur accent irks me.....😂
Sir i did not understand why O'3' is not the true length
Sir, If you put some presentation of Tray, funnel etc
I will try
What is the need of marking true length as it is parallel?
George Listen to this description very carefully at 4:50
Hello Sir, why we don't take true length in Pentagonal pyramid?
Anyone please help tmrw I m having exam!!
Thanku sir it is very supporting to teach engineering drawing
Hi Anuj.........
I am sure these videos are helping you learn the concepts...
All the best and do let your friends know about this channel so that they can also benefit.....
Sir, you haven't mentioned any dimension except Square edge, how can we draw it really ?
Many many thanks to you sir
sir, in this question o'3' is the true length in front view then why the process of true length has been taken?
i think there is a mistake
no man only two edges are seen so it can't be true length... if 3 edged age seen then it would be true length,third edge passing perpendicularly down from point O'
yes i understand thank you
@@mausamrajbanshi3192 Why is it so?? Sir.
thank u verry much sir it helps me alot
Hi Rintu.....
Thanks for appreciating the content...
All the best and do let your friends know about this channel so that they can also benefit....
sir thank you thank you so much ,sir are you civil engineering student ☺
No...I am a Mechanical Engineer..........
thank you sir..its helpful..
sir.. what is the main reason for calculating the slant edge?
sir i looooove your videos! ED Hero you are really!
sir what application are you using here in your windows system? please do tell me
Hi Girja.....First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Thats AutoCAD old version...
Manas Patnaik
thanks you sir!
And my whole class is your subscriber!!! of 96 peoples
+Girja shanker Dwivedi
Which college are you guys from?
Manas Patnaik
OMG! dear sir,
autoCAD is a paid app!!! how can i get it for free?
sir i am from Jabalpur, Jabalpur Engineering college,1st year....
but please tell what should i do to get autoCAD?
Manas Patnaik
OMG!
dear respected sir,
autoCAD is a paid software! please tell me how can i get it for free?
i am from Jabalpur,MP.
Jabalur engineering college., 1st sem.
but please, do tell me how can i get it for free?....
How do we get 3'1'
Sir plz form the front view top view and develop surface of hooper
thank u sir its really helpful
Thanks chaithanya for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
sir which software we can use in this problem and how to download it
Thats AutoCAD Shib....
thank you sir
Good work
Thanks for appreciating my work.
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html
3. Projection of Line:
OLD:
th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
th-cam.com/video/pzE0D-Ijxd4/w-d-xo.html
4. Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
th-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
th-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: th-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
th-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: th-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
th-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
th-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Why r we finding the true slant edge in cube pyramid alone🧐
How to develop lower surface of pyramid?
Awesome sir!!
Thanks Utkarsh for appreciating my work...
Do encourage your friends also to subscribe and learn from this channel.....
All the best in life....
Manas Patnaik sure sir... You saved my Engineering Drawing exam 😂😀
Can you make a surface area of half cut pyramid
sure
Thank you very much sir
very helpful
Awesome sir
Thank u
HOW TO DEVELOP SURFACE OF SQUARE PYRAMID WITH AXIS IS OFFSET FROMCENTRE
Sir can you upload its dwg file so we can download it too.. it would be very helpful
Really helping
Engineering student from nepal too
Sir please teach us a problem which involves 2 cutting planes 🙏🙏
very nice
You are welcome ashok...
Do watch all the content on drawing and mechanics.....
And do tell your friends about this channel so that they can also benefit.....
All the best
Genius Sir g
👍thank u so much sir
Hi Dheepa......First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....
Why 31 is written why does 3 change its position
Yes sharad, corner 3 has infact changed its position......
Actually there is no provision in AutoCAD for writing 1 in the subscript form....
How to pass eg in 1st year simple tips tell fastt