Another great vid 👍🏼 just on the t-piece to gearbox fitting, I’ve found that most t-pieces with a lip like the FB etc, don’t actually fit into the front of the MK boxes, did you drill out the front of the box in order for the t-piece lip to fit?..
I just bought the mk modular to put it in my Well PDW and have noticed a slight misalignment between the rear pin and the middle thin pin. Not sure how I'm going to go about it. Did yours have this as well?
@@hiroshimascreamer5884 ohh okay sir.. i have build aa 16:1 ratio on my gen8.. thats why i ask if someone could build aa dsg or 12:1 13:1 ssg ratio.. well maybe someday you wanna try it.. just upload your videos.. that would be good guide for others .. tq sir...
I found the well arp9 nylon construction more "plastic-y" than its most recent CQB predecessor, at $250 for the well arp9 I rather shell out an extra $50 for a XYL Arp9. Speaking of the XYL Arp9 the most recent release seems to have more trigger play, i.e. less sensitive hair trigger.
@@hiroshimascreamer5884 I just pulled the hand guard off the other day and saw that I wasn't the same screw on type it was a smaller thread under like a cap
![ตีสิบเดย์ [FULL] | แดนเซอร์ลำไย เด้งจน 1,000,000 แตก!!!](http://i.ytimg.com/vi/MYsBsMIQeT8/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | แดนเซอร์ลำไย เด้งจน 1,000,000 แตก!!!](/img/tr.png)
![[TH]FFWS SEA Spring 2024 Knockout Stage - Day 10](http://i.ytimg.com/vi/4QaEryUGWQw/mqdefault.jpg)
Like the vid man I was looking at the pdw9
Can U show us close up on how U connected the magazine terminal to the mk box
Another great vid 👍🏼 just on the t-piece to gearbox fitting, I’ve found that most t-pieces with a lip like the FB etc, don’t actually fit into the front of the MK boxes, did you drill out the front of the box in order for the t-piece lip to fit?..
Franc Rebernik hey mate, nope no drilling. I’ve never had that issue that I can remember.
Hiroshima Screamer where do you get your t-pieces from?..
Franc Rebernik FB metal ones, hard to find nowadays.
Red ones from gel ball undercover
champ i have XYL arp9 can this be done to them also???
Nice vid! Where u get the metal gear box? Looking for one for my gen9
John Baric MK Tactical Hobbies.
You want H92 model
Curious about the hopup type you are using.
Muzzle tek from azraels armoury
Thank you. Keep doing that voodoo that you’re doing it great to watch.
I just bought the mk modular to put it in my Well PDW and have noticed a slight misalignment between the rear pin and the middle thin pin. Not sure how I'm going to go about it. Did yours have this as well?
From memory yes, I didn’t use the front little pin. I’ll check tomorrow
Wells pdw is off slightly for whatever reason
@@hiroshimascreamer5884 Thanks man. Yes, if you could check and let me know that would be awesome.
@@hiroshimascreamer5884 hey mate were you able to check today? Cheers
@@Ryno69ification mine has the pin in bud
@@hiroshimascreamer5884 ah dam. Do you remember how you went about it? Use brute force until the nylon lower gives a little?
Hey man where did you get the wells arp from
Matt Collins M4A1 bro
where did you get the wells arp 9?
thanks
Nerolex M4A1 bud
where did you buy the T-piece from ?
Daniel Joel which one bro?
Hello sir.. could u make a dsg blaster build based on gen8 gearbox?.. nice video..
IronnHaze hey mate, gen 8 nylon box wouldn’t handle DSG unfortunately.
@@hiroshimascreamer5884 ohh okay sir.. i have build aa 16:1 ratio on my gen8.. thats why i ask if someone could build aa dsg or 12:1 13:1 ssg ratio.. well maybe someday you wanna try it.. just upload your videos.. that would be good guide for others .. tq sir...
@@hiroshimascreamer5884 here's mine..
th-cam.com/video/FdoX85NNPcg/w-d-xo.html
IronnHaze that’s pretty fast as it is bro 👍🏽
@@hiroshimascreamer5884 but still.. ssg bro😂😂..
I found the well arp9 nylon construction more "plastic-y" than its most recent CQB predecessor, at $250 for the well arp9 I rather shell out an extra $50 for a XYL Arp9.
Speaking of the XYL Arp9 the most recent release seems to have more trigger play, i.e. less sensitive hair trigger.
John H* yeah I agree, but wells takes v2 and xyl takes H92 so my preference is V2.
Plus nozzle and t piece alignment is better
John H* oh and it’s only $199 at the moment
@@hiroshimascreamer5884 what makes it your preference?
Overdose Au it has less tappet travel than a H92 gearbox
@@hiroshimascreamer5884 i assume that helps in particular with dsg tappet performance?
Are the mags still fast feeding like the other wells mags
Sabin Hill not 100% sure bud.
The feeding cog is smaller so should feed faster.
@@hiroshimascreamer5884 that would be good you don't have to upgrade the mag motor then
@@hiroshimascreamer5884 also how did you fit that hand guard on that ARP 9 is it a xyl or a hlf
@@hiroshimascreamer5884 I just pulled the hand guard off the other day and saw that I wasn't the same screw on type it was a smaller thread under like a cap
Sabin Hill xyl