not sure if its better design; easier to make, better, not so. all he had to do was two sets is sprockets and dog clutch. works the same, far less less complicated design
Well designed and thought out, If i tried similar i would be looking at a couple hundred dollars by time its built so might as well just weld a sprocket to a car gearbox and be done haha. Keep it up as every gearbox i see or build brings me closer to the one i want
All that work ...a simple lawn tractor transmission would have given you reverse plus 4 forward speeds .... however it is a fact that you are an ingenious fabricator Kudos for that
Hermano haces muy buenos trabajos, pero es hora de ir por los peces grandes. Construye un buggy pesado para 2 personas con motor estacionario. Salidos desde Bolivia.
Bro, I just suggested that if you make a vehicle, the bolt will be in the same hand as the vehicle, so the vehicle can be faster so the car can be faster
Nice! This actually has no difference in gear ratio right?? I wanna make a railroad kart with Yamaha Jog or Gy6 motor, and quadbike reversers arent suitable as they have different ratios in forward than reverse, i just need same ratio to go at 40~60 kmh, in both directions
Me gustaría ver que construyas un chasis de un go kart de competición (carreras/profesional) ya que generalmente son muy caros para comprar y no entiendo el por que
Hello master, is it possible to make a mini gearbox instead? So you can make a gearbox? I think you can. You can make a gearbox with gears inside. I believe. And a gearbox with forward and reverse gear.
two 120 motors one guts pulled out and the other left alone now take 40 amps alternator and take apart and put inside motor to use coil. then attach 775 and turn on and excite alternator and what do you get. if you use thermistor you get close to 120 also thermistor is throttle for scooter very fast. only 20 amps though.
hola filpo que gusto tus videos man, sabez quisero arman uno propio podrias hacer un video sobre que motor debo comprar y las medidas del armado porfa el conocimiento debe ser gratuito porfa.
Guys, how are you? which clutch do you use? I'm using one here in Brazil and it can't transfer the power from the engine to the wheel. watching your video I saw that yours is much wider than ours. If you could pass it on to me I would appreciate it. Thanks.
Muy buena idea como sugerencia diría que hubiese sido mejor activar el mecanismo con una palanca, que tuviera algún seguro con resortes o algo, seria mas practico.
All your hard work can be done quickly with a made in China reverse/forward/neutral gearbox costs around $120 on ebay or Amazon. Thanks for sharing the info.
This is a much better design than using sprockets as gears. It gives good examples and ides to incorporate in ones own future designs. Thanks.
not sure if its better design; easier to make, better, not so. all he had to do was two sets is sprockets and dog clutch. works the same, far less less complicated design
HERMANO FILIPO QUE EXCELENTE EL MECANISMO DE REVERSA, FELICITACIONES POR TU DIDACTICA, ESA CAJITA ME HA IMPACTADO ES FORMIDABLE.
Amazing...👍👍
Nice idea
Felicitaciones, y gracias a Dios por darle el don de la sabiduría. Desde Bogotá Colombia un abrazo
Hola felicitaciones capo esta buenicimo tu invento soy de paraguay pero estoy en argentina
q espectacularidad de video, resolvistes años luz en inventos, estoy armando diseños para fabricar motocultor, con esto le meto reversa
god bless science and engineering!
Excellent - brilliant idea.
Saludos desde costa Rica gracias por compartir tus conocimientos excelente trabajo saludos
Hi from Texas! Excellent job!
Well designed and thought out, If i tried similar i would be looking at a couple hundred dollars by time its built so might as well just weld a sprocket to a car gearbox and be done haha.
Keep it up as every gearbox i see or build brings me closer to the one i want
Please show me this car gearbox you can get for a couple hundred dollars 🙄
Nice work.I learn many .
I like better the kart behind you,the one with convetional engine under the window.You should change it to electric.Your work is awsome man!!Like.
Excelente, buen trabajo ¿en cuánto me vendes ese carriño? Gracias.
Saludos desde Colombia en el sur de América.
ระบบเดินหน้า ถอยหลังสุดยอดครับ
All that work ...a simple lawn tractor transmission would have given you reverse plus 4 forward speeds .... however it is a fact that you are an ingenious fabricator
Kudos for that
Complicated but impressive 👍
Hermano haces muy buenos trabajos, pero es hora de ir por los peces grandes. Construye un buggy pesado para 2 personas con motor estacionario. Salidos desde Bolivia.
Qué ingenió, excelente.
Hola saludos desde Ecuador yo también ise un go kart en base de tus vídeos
Amazing
Muy bueno tus Videos he tenido bicimoto de 4 tiempos y son bastante potente like y me suscribo saludos desde Mexico
There's a legend born every day and your one of them top engeneers 🇦🇺👌🏼👍🏽☝🏼️💪🏼
Excellent job
Bro, I just suggested that if you make a vehicle, the bolt will be in the same hand as the vehicle, so the vehicle can be faster so the car can be faster
Fantastico
Amigo ese Kart gira con ambas ruedas a la vez? O tiene alguna especie de diferencial en el eje? Que tal pasa las curvas?
Gracias.
Saludos
Nice! This actually has no difference in gear ratio right?? I wanna make a railroad kart with Yamaha Jog or Gy6 motor, and quadbike reversers arent suitable as they have different ratios in forward than reverse, i just need same ratio to go at 40~60 kmh, in both directions
excelente trabalho perfeito parabéns
Woooooow that is Amazing
Que lindo vídeo
Excellent
What about the construction of the steering suspension?
What a intellegent bro
Sinplesmente um gênio este Rapaz parabes
Bem criativo. Top
The best creative
excelente amigo muy ingenioso ahí tienes una buena base de tu invento para mejorar algunas cosas pero súper bien mí like
Huarda vien ese inveto y cuidate mucho.por que el invento esta buenisimo...
Yo soy de🇵🇷🇵🇷🇵🇷✋✋😃☝️☝️puerto rico...saludo
Good job
super👍👍👍
Nice idea goodluck
Me gustaría ver que construyas un chasis de un go kart de competición (carreras/profesional) ya que generalmente son muy caros para comprar y no entiendo el por que
Very nice
Wow❤️👍
very good sir, I wish you more success and smooth greetings from Indonesia 🙏
Filipo tenes que hacer un proyecto con el motor 2t de una bicimoto.. Seguí así Saludos!!!!! 😉
Filipo seria bueno un curso me interesa cuanto cobras
👍👍👍👍
Absolutamente genial!
Hello master, is it possible to make a mini gearbox instead? So you can make a gearbox? I think you can. You can make a gearbox with gears inside. I believe. And a gearbox with forward and reverse gear.
Good
two 120 motors one guts pulled out and the other left alone now take 40 amps alternator and take apart and put inside motor to use coil. then attach 775 and turn on and excite alternator and what do you get. if you use thermistor you get close to 120 also thermistor is throttle for scooter very fast. only 20 amps though.
I had to watch this twice to understand how it works😆
Well done guys, a very clever design with minimal tools and materials!
Funziona, ma è troppo complesso. Basta un ingranaggio. Comunque complimenti per l'idea. 😁👍
nice 👍
Very good
Muito prático ficou
Buenicimo, sos un genio 👏🏻👏🏻👏🏻👏🏻👌🏼
boa.tarde.amigos.
a todos.tudo.bom.
meu.parabéns.pelo.
trabalho.incrível..
obrigado.a todos.
abraços.😃😃😃😃😃😃
Top
Muy bonito
Amazing brother good idea,i your fans from indonesia
hola filpo que gusto tus videos man, sabez quisero arman uno propio podrias hacer un video sobre que motor debo comprar y las medidas del armado porfa el conocimiento debe ser gratuito porfa.
Ya explicó como hacer todas esas cosas!!!!!! Se nota que ni te gastas en buscar la información que necesitas!!!
@@precisionautoshop2380 ok lo revido gracias igual
Hello sir, Can you tell me what is the type of chain you are using, is it a t8f?
Top boss
Guys, how are you? which clutch do you use? I'm using one here in Brazil and it can't transfer the power from the engine to the wheel. watching your video I saw that yours is much wider than ours. If you could pass it on to me I would appreciate it. Thanks.
ซื้อกำครัชได้ที่ไหนน่อจ้า
Como le hizo para ponerle cadena en ves de poleas?
Donde consigo el embrague centrifugo para cadena paso 50
Good job 👍👍👍👌
Muy buen trabajo
dónde compras el cluch k tiene puesto ?
hola tengo un problema espero y veas es comentario tengo un motor de 5 hp pero el problema esta en que la flecha esta hacia abajo
Thanks very much, your so good, I'll try it,
Best
I love it
Muy buena idea como sugerencia diría que hubiese sido mejor activar el mecanismo con una palanca, que tuviera algún seguro con resortes o algo, seria mas practico.
Oye cómo se llama la soldadora q el usa
@@robotbiker La soldadora es de microalambre de tipo MIG/MAG
Seria bom falar o nome das peça qual o motor
HOLA amigo tendras algun plano o esquema por el cual me pyeda guiar
Deberías hacer tus videos hablados, hay gente como yo que solo mirando no puede entender
Una consulta , que embrague usas para el piñón de tu motor , o como lo consigo en el mercado ?
embrague centrifugo de 12 dientes cadena 428 y para eje 19 milimetros
Hai bro
How did you make sure the sprocket was center with the plate when drilling the holes
He didn't
0:12 I think the electrical outlet is burned :D:D
Make Wow Lovely and even simpler than the gear lever
Me gustaría comprarte un embrague para motor estacionario, responde por favor
RIGHT ON, GOOD JOB.
Show de bola
Donde compras las catalinas
Bên minh co bán bô bố nhông xích 250 ko a
СУПЕР ! ЛАЙК ! ! !
Genio
Нужно сделать ещё проще и надёжнее, как АК-47.......
🙌
👍👍👍👍👍😎
Buen video..
Rives gir kese banate he sir sahi se dikhao
🤝🤝👏👏👏👏👏
Con tu động mua ở đâu a
All your hard work can be done quickly with a made in China reverse/forward/neutral gearbox costs around $120 on ebay or Amazon. Thanks for sharing the info.