Another great video man, I love how you guys incorporated comedic cut scenes into the video. Shows commitment to building an organic relationship with the guest. Construction looks peerless and you can sense the pride in craftsmanship. Btw, I found the hardware for my rear splash guards, really appreciate everything.
Just installed yesterday after running without any undershroud for a few years (my OEM one was in terrible shape so I just took it off). I did have to drill one new hole in the existing plastic because the original holes were "torn" but it worked out! I'm very happy with the product overall.
could you guys make a full flat under shroud? like what they have on racecars? From the engine all the way to the muffler to prevent any damage to prevent to the exhaust on bumps etc plus reducing drag at higher speeds. Could even add in a rear diffuser for an actual racecars application
Good call. One of things I found very impressive about my brothers Porsche GTS was the fully flat bottom. The question would be cost vs effectiveness aero wise. Without a wind tunnel you wouldn't really know if it was worth it.
It has been discussed in the past, however whether or not we will manufacture that is hard to say, mainly because of the massive variety of exhausts, chassis braces, and other accessories on the market that would have a potential effect on fitment.
Another great vid by z1 aye thx alot my infiniti g35 build just got easier, question if I was to buy an aftermarket bumper will I need to mod or make any cuts to make it fit
Would z1 ever fabricate an H brace or radiator support brace for the z33 in replacement to the one that came with the Nismos? Were there any benefits for the Nismo edition having it? I have a 07 Nismo and it is missing the brace when I bought it. Your fabrication skills are premium. I wish I was closer to Georgia. Maybe I will transfer to a school down there. lol
@@Z1Motorsports23 aluminum corrodes, same as steel. The difference is that once the outer layer of aluminum becomes oxidized, the material reaches passivation. Whereas with steel/iron, it does not and corrosion continues as long as there is moisture.
How the hell you supposed to change the filter and oil drain plug.?. , you gotta take the whole thing off and put the whole thing back on again? Is there like a door i can take off? So i dont have to take the whole undershrpud off?
Our undershroud has a large removable service panel. Remove two 10mm bolts and the entire rear section swings out of the way to provide easy access to the oil pan and filter.
Another great video man, I love how you guys incorporated comedic cut scenes into the video. Shows commitment to building an organic relationship with the guest.
Construction looks peerless and you can sense the pride in craftsmanship.
Btw, I found the hardware for my rear splash guards, really appreciate everything.
Thanks for the kind words :) Glad you enjoyed it!!
I luv Z1, I'm glad I don't live near you or I'd be there every day buying stuff lol
Can't wait for 370z/g37 version!
Just installed yesterday after running without any undershroud for a few years (my OEM one was in terrible shape so I just took it off). I did have to drill one new hole in the existing plastic because the original holes were "torn" but it worked out! I'm very happy with the product overall.
got these few days ago and its beautiful and installation was breezing easy
I love products designed by mechanics. it's a beautiful thing.
could you guys make a full flat under shroud? like what they have on racecars? From the engine all the way to the muffler to prevent any damage to prevent to the exhaust on bumps etc plus reducing drag at higher speeds. Could even add in a rear diffuser for an actual racecars application
Good call. One of things I found very impressive about my brothers Porsche GTS was the fully flat bottom. The question would be cost vs effectiveness aero wise. Without a wind tunnel you wouldn't really know if it was worth it.
It has been discussed in the past, however whether or not we will manufacture that is hard to say, mainly because of the massive variety of exhausts, chassis braces, and other accessories on the market that would have a potential effect on fitment.
Or just past the transmission?
Another great vid by z1 aye thx alot my infiniti g35 build just got easier, question if I was to buy an aftermarket bumper will I need to mod or make any cuts to make it fit
Does this come in A version for the AWD G37X?
I had to remove my factory shroud, when removing I broke/ripped some of the tabs because the bolts were so rusted. Any recommendations?
Does it give you more clearance because I'm using the stock one and I get stuck on my driveway with my z
Finally got mine in and it looks gorgeous 🤙🏽
We're glad to hear you're satisfied!
I'm impressed 🍻
Would z1 ever fabricate an H brace or radiator support brace for the z33 in replacement to the one that came with the Nismos? Were there any benefits for the Nismo edition having it? I have a 07 Nismo and it is missing the brace when I bought it. Your fabrication skills are premium. I wish I was closer to Georgia. Maybe I will transfer to a school down there. lol
Will there be a g37 version?
Eventually yes, we will be producing one for 370Z/G37's.
Z1Motorsports if you need someone for testing, I have a 2011 sedan with Stillen sway bars.
I can't wait to buy these for the G35 😬
Does it come with the mounting bolts>?
Yes, all installation hardware is included.
Are they in stock and ready to ship? Othe shops take the order and then emails you, it’s back ordered.
As of right now (9/9/2020) we have PLENTY in stock!
Will this clear my front under brace?
Nice, but will you all provide one with a protective coating to prevent rust ect?
The undershroud is aluminum, which does not rust.
@@Z1Motorsports23 aluminum corrodes, same as steel. The difference is that once the outer layer of aluminum becomes oxidized, the material reaches passivation. Whereas with steel/iron, it does not and corrosion continues as long as there is moisture.
It's pretty much self explanatory but it would have helped if it came with directions on the spacers & where they went, in, out, & where.
I missed you Spenser 😭😭
2008 G35X sadan ?
Need some for Q50 🔥👌
Hi there. Do you ship to New Zealand? Cheers.
We sure do!
Wheres that 370z version? I'm tired of my plastic one.
Is this for the NON Nismo version? I have a 2011 370Z.
Will this fit a V36 G35 sedan? 2007 RWD
No this will not fit the '07-08 V36 Sedan, however we will be working on one specifically for that.
Z1Motorsports will turn notifications on😊
How the hell you supposed to change the filter and oil drain plug.?. , you gotta take the whole thing off and put the whole thing back on again? Is there like a door i can take off? So i dont have to take the whole undershrpud off?
Our undershroud has a large removable service panel. Remove two 10mm bolts and the entire rear section swings out of the way to provide easy access to the oil pan and filter.
What about the 370?
wanted to like the vid but it's at 350... didnt want to mess that up so i commented instead
Lazer cut and poor shipping! My shit was bent up!
They made this video because of me I just bought one two days ago lmfao
I imagine it will need to be cut if you run a oil cooler
No modification of the undershroud is required with a properly installed oil cooler.