Not my colour preference with that case, but that clearance at the top is pretty decent! Nice attention to detail with wiping out the case to remove any metal filings!
Not with this motherboard it supports both 12&13th gen. I always update the bios anyways right away because if anything goes wrong it’s easy to return.
i have this mobo and sapphire nitro rx6700xt. but the gpu is too big that it covered wifi module and pcie x1 slot. can i put the wifi card on the last pcie x16 slot? this is my first build, so any guidance would be appreciated
Yea the performance of the same model card is usually within 5% so not much change there. It’s decent at temps but all 6650s should be it’s a pretty efficient card. I would focus on warranty more than anything else the aftermarket cards are so close in this class.
Good afternoon, the video card has a normal temperature and there is a hotspot, amd calls it in its program (transition temperature or junction temperature) so I would like to know its value in heavy games or tasks!@@walkersgamingpcs
With default settings after an hour running timespy on a loop , the GPU temp was 72, the GPU memory junction temp was 76 and the hotspot temp was 93. You could make a custom fan profile to lower these temperatures more, which is what I would do.
I have it defective, furmark full hd + without anti-aliasing, after 1 minute of hotspot operation from 90 degrees and it heats up further, I kept it up to 105 degrees further, it became a pity not to kill it completely, even though you set the fans to full!@@walkersgamingpcs
You will probably want a better board for a 13700k, those VRMs are going to get pretty hot. You can run it in 125w mode and the VRMs will be fine but you will lose some performance.
With this build? Yes it can, @1080p it will benefit from a stronger CPU but it’s not like a better CPU will put it up to 6700 levels it just won’t, it’s always better to upgrade GPU over CPU in a gaming pc.
Right on, I wouldn’t put it on anything but an I3 and I make a custom profile so it’s not loud. It hits 62c under heavy load(cinebench) and mid 50s while gaming so not hot. I also don’t want to add unnecessary waste to the environment so that’s why I do it this way. But if the customer buys one, I do install it for free in the first 30 days.
Not my colour preference with that case, but that clearance at the top is pretty decent! Nice attention to detail with wiping out the case to remove any metal filings!
Thanks for watching, this case does come in several colors. Take care.
I have the same case in black with 6 of their argb fans and a controller with the 240 AIO and all of it was 165$USD.. i couldnt say no
Love the Vetroo M03 PC case thanks to you I've built my 1st gaming PC watching this very video my case is the black edition.
That’s awesome to hear, that’s why I do it. It’s great to hear it helped someone, if you have any questions just ask 😊.
@@walkersgamingpcs Thanks my PC build : Vetroo M03 PC case, Vetroo V240 liquid cooler, Vetroo 3 pack 120mm argb fans, Samsung 980 pro SSD 1tb pcie 4.0 nvme gen 4, EVGA 600 watts PSU, EVGA x570 dark motherboard, AMD Ryzen 5700x CPU, EVGA Nvidia GeForce rtx 2080 ti black edition GPU. My budget gaming PC.
That should be a great gaming/streaming rig it should be decent at production as well, 2080ti will be relevant for awhile. Good Build.
Nice build man..I have the same case in black with 6 of their argb fans and a controller with the 240 AIO and all of it was 165$USD.. i couldnt say no
Yea that’s a nice bundle for the price , if you got any questions about the build just ask 😊.
do you have to do a bois up date for 13th gen
Not with this motherboard it supports both 12&13th gen. I always update the bios anyways right away because if anything goes wrong it’s easy to return.
Between is GPU (ASRock challenger) or Sapphire Pulse GPU, both 6650xt for about $280, which is better?
At same price I would go with sapphire they have a better warranty, but I would think you could get a 6700 for $280.
i have this mobo and sapphire nitro rx6700xt. but the gpu is too big that it covered wifi module and pcie x1 slot. can i put the wifi card on the last pcie x16 slot? this is my first build, so any guidance would be appreciated
Yes you can do that and it won’t effect performance, it will work in x1 x4 x8 or by x16.
is the asrock rx 6650xt good for temps and perfomance?
Yea the performance of the same model card is usually within 5% so not much change there. It’s decent at temps but all 6650s should be it’s a pretty efficient card. I would focus on warranty more than anything else the aftermarket cards are so close in this class.
didn't you put the thermal paste, did you?
The stock Intel cooler comes with paste pre applied, I show it in some of the videos I must have not shown it in this one, but it’s there.
Can that motherboard use RTX graphics cards?
Oh yea, this MB will work with Intel, AMD, or Nvidia graphics cards, but the CPU compatibility is limited to 12th, 13th &14th Gen Intel CPUs
Does anyone knows what nail size it needs please
Nail size?
Hello, friend, tell me, do you still have this assembly? how many hotspots does the video card have in heavy games or loads ?
Yes I still have it, but I don’t know what you mean n by hotspots.
Good afternoon, the video card has a normal temperature and there is a hotspot, amd calls it in its program (transition temperature or junction temperature) so I would like to know its value in heavy games or tasks!@@walkersgamingpcs
I’ll check it out tomorrow, I’m away right now. I’ll run timespy on a loop for an hour and see what it is.
With default settings after an hour running timespy on a loop , the GPU temp was 72, the GPU memory junction temp was 76 and the hotspot temp was 93. You could make a custom fan profile to lower these temperatures more, which is what I would do.
I have it defective, furmark full hd + without anti-aliasing, after 1 minute of hotspot operation from 90 degrees and it heats up further, I kept it up to 105 degrees further, it became a pity not to kill it completely, even though you set the fans to full!@@walkersgamingpcs
Teamgroup t force vulcan Cl 18 or cl 14 ?
It’s cl18 but the cl14 would be a little better
@@walkersgamingpcs awesome I'm excited for this build 💯
If you have any questions don’t hesitate to ask, I built this channel to help people.
ASRock Radeon RX 6600 8GB GDDR6 PCI
Express 4.0 Video Card RX6600 CLD 8G
What's the difference between both of these ?
That’s the same card, no difference.
does the case come with a fan hub/argb fan hub?
No it does not, it just comes with 1 argb fan
@@walkersgamingpcs So to connect it all in 1 argb slot on the mobo you just daisy-chained it?
Yea you can do that.
can this main board handle i5 13400f and amd 6800?
Yea the motherboard should be fine with that CPU , a case with decent airflow will help keep the VRMs on the board a little cooler.
what if changing to 13700k without OC?
You will probably want a better board for a 13700k, those VRMs are going to get pretty hot. You can run it in 125w mode and the VRMs will be fine but you will lose some performance.
Can the RX 6650 XT reach 100% performance?
With this build? Yes it can, @1080p it will benefit from a stronger CPU but it’s not like a better CPU will put it up to 6700 levels it just won’t, it’s always better to upgrade GPU over CPU in a gaming pc.
Im building the same pc!!!
That’s awesome, if you have any questions just ask. I built this channel to help people.
@@walkersgamingpcs is 650w enought for that build ?
Yea this system draw 400 watts max, 650 will give you some extra head room for the future.
@@walkersgamingpcs Thanks :D
Um i have another question. How does it perfom in games? The games i had in mind for that pc is, minecraft, fortnite, Gta V, and warzone 2.0
I just hate how all budget pc build videos use the stock cooler, it's hot and loud, from my experience a 5$ oem 90mm tower cooler is 10-15C cooler.
Right on, I wouldn’t put it on anything but an I3 and I make a custom profile so it’s not loud. It hits 62c under heavy load(cinebench) and mid 50s while gaming so not hot. I also don’t want to add unnecessary waste to the environment so that’s why I do it this way. But if the customer buys one, I do install it for free in the first 30 days.