Greetings to all bikers, I want to ask about my 2010 3rd generation Kawasaki ZX10 motorbike, please advise and help, my ZX10R has problems with the fuel pump .... where can I buy fuel pump parts for the ZX10R
when you split the fuel pump apart the top part where fuel preasure regulator is housed there is micro screen that will plug up no matter what you do buy new motor for pump is not going to help you if your bike wont go past a certain rpm the problem is at the top you cant get to this micro screen you have to use toilet bowl cleaner and achoal take out your fuel preasure regulator pour down all three holes take apart paper clip put in down the hole where pump goes in back and fourth inside hole with paper clip you wont have another problem with fuel pump no need for new motor no need for new plugs no need for new coils its all in the top of the fuel pump houseing thank me later
Please help. I am repling ti this post as it can be my last hope. On my ZX10R i replaced 6 pumps, several screen filters, two regulators, pump wireing, rubber seals. Nothing helps. Even changed sparkplugs and shrt-bricked sidestand switch. So, this inner screen... Last hope as I said....what do you exactly mean by wc cleaner...like gel, bleacher or limescale remover? What exactly + compresse air I guess?
That worked for me! I appreciate you! I’ve changed the coils, plugs, fuel pump, fuel pressure regulator, fuel filter, all 8 injectors..not throwing any codes and wouldn’t rev past 6K Until I tried toilet bowl cleaner and alcohol and now she redlines in every gear! Thanks again I hope this helps someone
Greetings to all bikers, I want to ask about my 2010 3rd generation Kawasaki ZX10 motorbike, please advise and help, my ZX10R has problems with the fuel pump .... where can I buy fuel pump parts for the ZX10R
waiting to watch this premier from team hht
Waiting you bideo from helping video God bless
Is it still working?
I used cinese low quality and after one year gone bad.
when you split the fuel pump apart the top part where fuel preasure regulator is housed there is micro screen that will plug up no matter what you do buy new motor for pump is not going to help you if your bike wont go past a certain rpm the problem is at the top you cant get to this micro screen you have to use toilet bowl cleaner and achoal take out your fuel preasure regulator pour down all three holes take apart paper clip put in down the hole where pump goes in back and fourth inside hole with paper clip you wont have another problem with fuel pump no need for new motor no need for new plugs no need for new coils its all in the top of the fuel pump houseing thank me later
Please help.
I am repling ti this post as it can be my last hope. On my ZX10R i replaced 6 pumps, several screen filters, two regulators, pump wireing, rubber seals. Nothing helps. Even changed sparkplugs and shrt-bricked sidestand switch.
So, this inner screen... Last hope as I said....what do you exactly mean by wc cleaner...like gel, bleacher or limescale remover? What exactly + compresse air I guess?
Prova con il wd40 per togliere il sporco dentro il filtro ...fammi sapere quando la provi salute amico mio.
@@TomCatAMD64 я поставил фильтр тонкой очистки от сузуки джиксер все подошло 15610-27G00-000
That worked for me! I appreciate you! I’ve changed the coils, plugs, fuel pump, fuel pressure regulator, fuel filter, all 8 injectors..not throwing any codes and wouldn’t rev past 6K Until I tried toilet bowl cleaner and alcohol and now she redlines in every gear! Thanks again I hope this helps someone
ফেলিসিডেস, এটি মিনাংকাবাউ উদাহরণ। 250 sentadillas son unos JPN-STARR.Uno muchas y un buen ejercicio. 5:25 Dadi dejav ver que hay muy buenos ফলাফল 😍👍