As someone who has just upgraded from an ace250, this is much needed and very helpful. It’s like taking control of a spaceship when you are used to driving a ford escort.
Cheers Sid. I must thank you as I tried these settings and on my first 2 digs I found gold. Vids on my channel now. Thanks.....I will stick with these for now but loving the kruzer as there are so many settings to suit the user.
Thanks, the settings are working very good for me. 👍 Because the tone break for iron is very low, the tones are not jumpy when I hit low conductive coins.
Hi there thanks for great info on settings much appreciated. I bought a 2nd hand Kruzer as just decided to have a bash and I’m learning slowly. I Dailed in your settings but it was very chatty. I’m on a field which has stubble and every time I hit the stumble with the coil it starts chatting. Is there something I can do to stop this. Ps great videos by the way👍🏻
Very informative video thanks! Can someone tell me which modes are VCO audio in the Multi Kruzer? Also, based on your experiences, in salt water (especialy underwater in sea) will the 19Khz freq be steady in salt, or better to use 5khz (which will may lose small jewelry) ?
Good video watched few times now. Is it possible to save multi settings ie one for beach and one for stubble and another for pasture land ? If you have say ten fields it would be good to just press program 1 -10 for each of the different set ups. Thanks
Good settings Sid, I have been using mine with the 13" Black Dog XXL coil I have for my Impact, better balance, a killer combo. Out today trying the 9.5" and 7.5" Impact coils on a very trashy Park. Cable is a bit shorter but thats not a bad thing as I have never understood why they need to be so long anyway.
Yes, contacted Volcan at Makro and apart from the shorter cable as I mentioned there is no issues with using Impact coils on the Kruzer. They are exactly the same coils matey, one has the IM prefix the other has KR, gonna save me a fortune on coils. However, not sure on the waterproof side of things, but I wont be diving anyway, just surf and wet beaches a few times a year.
The Impact coils are Waterproof so the only issue could be the coil connector to the control box. They both look exactly the same but that doesnt mean they will be I guess. In fairness, using the Impact coils on the Kruzer will only be useful to those with Impact coils already, other users will just buy the Kruzer coils. I will be using the Kruzer on Land, dry/wet sand and the surf so it wont be an issue, IF I were to dive with it (unilkely) I would use the standard Kruzer coil anyway.
cheers for this just got my multi kruzer a few days ago ,will try your settings and see how i get on.....is there a way to listen to the different tones as you go through the menu or is it field test only?
there is 2 breaks equalling 3 tones... so iron goes up to say 5 then there is a break at 5, then a break at say 50 so you then have 3 tones, 1st tone is iron from 0-5, 2nd low tone 5 - 50 and 3rd is high tone 50 +
just done air test with these setting using 3 tone mode had gain at 70. disc at 3. notch at 4. fe vol at 3. tone break at 0 to 4 on low and 4 to 70 on medium and isat at 0. even with these settings it struggles to pick up all coins ive put in front of it at more than 15 cm and before anyone asks i did ground balance. Im thinking ITS FAULTY ?
richard bevan its all on the machine, up / down to go through the menu, left / right to increase or decrease. Settings / options button to set. Play with your machine...
As someone who has just upgraded from an ace250, this is much needed and very helpful. It’s like taking control of a spaceship when you are used to driving a ford escort.
Cheers Sid. I must thank you as I tried these settings and on my first 2 digs I found gold. Vids on my channel now. Thanks.....I will stick with these for now but loving the kruzer as there are so many settings to suit the user.
Great video, very helpful to a newbie like myself who just purchased one of these. Cheers.
Thanks, the settings are working very good for me. 👍 Because the tone break for iron is very low, the tones are not jumpy when I hit low conductive coins.
Hi there thanks for great info on settings much appreciated. I bought a 2nd hand Kruzer as just decided to have a bash and I’m learning slowly. I Dailed in your settings but it was very chatty. I’m on a field which has stubble and every time I hit the stumble with the coil it starts chatting. Is there something I can do to stop this. Ps great videos by the way👍🏻
Very informative video thanks! Can someone tell me which modes are VCO audio in the Multi Kruzer? Also, based on your experiences, in salt water (especialy underwater in sea) will the 19Khz freq be steady in salt, or better to use 5khz (which will may lose small jewelry) ?
Good video watched few times now.
Is it possible to save multi settings ie one for beach and one for stubble and another for pasture land ?
If you have say ten fields it would be good to just press program 1 -10 for each of the different set ups.
Thanks
yes you can adjust every mode and save it as you like
thanks for this helped me a lot
Good settings Sid, I have been using mine with the 13" Black Dog XXL coil I have for my Impact, better balance, a killer combo. Out today trying the 9.5" and 7.5" Impact coils on a very trashy Park. Cable is a bit shorter but thats not a bad thing as I have never understood why they need to be so long anyway.
Mutley so the impact coils work on the Kruzer too??
Yes, contacted Volcan at Makro and apart from the shorter cable as I mentioned there is no issues with using Impact coils on the Kruzer. They are exactly the same coils matey, one has the IM prefix the other has KR, gonna save me a fortune on coils. However, not sure on the waterproof side of things, but I wont be diving anyway, just surf and wet beaches a few times a year.
but cant use underwater???
The Impact coils are Waterproof so the only issue could be the coil connector to the control box. They both look exactly the same but that doesnt mean they will be I guess. In fairness, using the Impact coils on the Kruzer will only be useful to those with Impact coils already, other users will just buy the Kruzer coils. I will be using the Kruzer on Land, dry/wet sand and the surf so it wont be an issue, IF I were to dive with it (unilkely) I would use the standard Kruzer coil anyway.
Thanks for this, mine is arriving today. Only question from your video is what frequency do you use. I will mainly be on pasture. Cheers
there selling machines now theres no need too chat too people anymore the word is out lol
Hi Phil I find your disc a bit low if you increase a bit I found it more stabble and productive with out missing good targets
This product uses a 15 inch plate. Can you find deeper metal? For example, can a football sized metal be found at 80 cm?
cheers for this just got my multi kruzer a few days ago ,will try your settings and see how i get on.....is there a way to listen to the different tones as you go through the menu or is it field test only?
I would quite like a Kruzer, I have a Makro Racer just now
Hi there what would your settings be for 4tone on the T break and the Tone. I’ve used your 3 tone which is very good by the way
In 3 tone search mode why can’t you set up 3 tone breaks ? No matter how I try there’s only 2 ?
there is 2 breaks equalling 3 tones... so iron goes up to say 5 then there is a break at 5, then a break at say 50 so you then have 3 tones, 1st tone is iron from 0-5, 2nd low tone 5 - 50 and 3rd is high tone 50 +
If your settings for this machine are anything like your programme that you did for the Deus then it should be a good machine. Phil
Just got this one myself. Great machine. What frequency are you running on? Maybe the disc should be a little higher?
where I buy the external battery cover of this detector for kindness
Nice video. Thanks!
Very good video.
that was great help cheers
Are these settings good for the beach?
just done air test with these setting using 3 tone mode had gain at 70. disc at 3. notch at 4. fe vol at 3. tone break at 0 to 4 on low and 4 to 70 on medium and isat at 0. even with these settings it struggles to pick up all coins ive put in front of it at more than 15 cm and before anyone asks i did ground balance. Im thinking ITS FAULTY ?
clio walters you need to put gain above 90 for best depth. Under 90 gain has faster recovery speed resulting in a little depth loss.
Try running gain at 89....gain of 70 would be good for four tone..but in three tone it would lose depth at that low
Do your settings save when you turn it off is this machine better than than the AT Max
Thanks for this i like it, just i like more T.break Fe 14
Will the coils from the Racer2 work with this?
I look for gold in Australia the ground is very hot . I want the best discrimination mode
It would be more helpful if you could show which buttons you are pressing 👍
richard bevan its all on the machine, up / down to go through the menu, left / right to increase or decrease.
Settings / options button to set.
Play with your machine...
Tried all modes and all frequencies and its the same
video with blacked buttons not very helpfull or boring ..