ive never really worried about milk spotting or toning. Helps indicates that it's real silver, and pretty much everything I stack is prone to spotting anyway. Most of my silver stays locked up after it arrives, save for counting it once or twice a year, and I plan to keep it that way for the next couple of decades.
Hell yeah. I actually prefer rounds, but if they're going to sell them for round price; I'll take them. The coins have too high a premium, and the custom rounds feel more collectable to me. They're more varied in design.
The only way to remove milk spots is with Rodico. It is a type of clay the watch repairs use. Everything else will damage in some way the coin. No one would know that it was cleaned with this stuff erasers and chemicals are the worst.
They need to come out with a better process to avoid milk spotting! The buying expense is high on these coins and then to have them devalued is ludicrous!
I bought 11 Benjamin Franklin half dollars the other day at a local coin shop and one of them was beautifully toned. I put it on top of my role in the little holder so I could see it LOL. Another coin was a dime that I found in a regular bankroll and although it was a new dime it was toned in a purple hue. I saved it aside and made a little pill bottle for toned common coins because I just like them.
Feel like these coins should come with a Money Back Guarantee from the mints. I bought a pretty shiny coin because I wanted a pretty shiny coin. Their merchandise became defective with milk spots. Mints should do an even swap. 😄
Good point. Imagine if you buy a bright red sports car for a mid life crisis, and the next day you wake up and look out the window and your new car is dull and spotted... I wonder if the law would make the seller to repaint the car...
I was a custom pocket knife maker for about a decade, and we get something similar on titanium when anodizing it. You use Borax (tri-sodium phosphate) as an electrochemical conductor during the anodization process, typically in saturated solution of deionized water. When you're done with ano you have to rinse it thoroughly or you'll get little spots that develop in the oxide layer, which will ruin the finish over time. That said, the spots are actually a reaction between the silver and the phosphates in the cleaner, and you're probably going to have to etch them away, which is going to ruin the finish. You might try Barkeeper's Friend in a thin paste and a VERY soft, high-pile microfiber and see if that works - it does for Ti ano spots.
@@tacticalcenter8658 Got bored trolling my channel so you decided to come over here. You might want to get some cream or ointment ... maybe go see a Dr. if your butt is still hurting so bad.
The RCM states: "As of 2018, all Maple Leaf silver bullion coins are enhanced with Mintshield surface protection." The use of a soft eraser is presumably the only relatively safe method of removing Milk Spots. But the type of eraser used is very important. You'll want to consider a soft polymer-type eraser and shape it slightly with a blade before applying it. I just bought some new Canadian silver 1oz Maple coins (2022) and I'll chime in again if I see any Milk Spots appear. I'd also suggest using moisture absorbing packets in a small, airtight, sealed plastic container to ensure the coins are not subjected to moisture or air. I have some silver coins in non-airtight displays here that have been sitting in a glass cabinet for years (they were not encapsulated) and they're quite strongly toned now. So a sealed container with no moisture seems to be the best we can hope for.
I ordered a coin today, milk spots front and back. I'm going to clean it with Rembrandt toothpaste, probably do a video of it next week. I think I would have tried Red Rouge before I would use the eraser.
I've always understood the "application of high heat" solution to mean melt the coin down. Meant as a joke because there's nothing you can do about milkspots.
As a new stacker my very first purchase was a whole roll of spotted Canadian maple leaves. I specifically bought them because I'm looking for weight and I got them cheaper. I have mixed feelings about it though because I believe that the mint should guarantee them since it's their mistake in the first place. I think I paid $2 over spot for them or something pretty close to that. I just hope I get at least the spot price when it comes time to sell down the road. I've since bought some higher quality silver and even a quarter ounce gold coin. I'm continuing to learn as I go.
NGC, I read, will still grade a coin MS70 with spot. The reason being the spot is mint state and not damage or marked after production. Spot is still unsightly though. Something happened in processing coins 2016 as the U.S. Eagle, Liberty along with the CAD Maple were horrendous that year. I believe both mints tried out a new chemical that year. I did not retain the details. Other than that borax has always been believed to be the cause of spotting. Cheers for the blow torch testing. I had considered giving it a go now I have no need to waste my time.
I just checked the other day I have milk spots on my 2021 Silver Eagle's, Maple Leafs, and Perth Coinage. Long story short, buy bars and junk silver for the spot value. Also buying crypto seems like a better option (at least I don't have to worry about my Bitcoin getting milk spots that will make one Bitcoin worth less than another due to manufacturer defect). Plus I don't have to pay a premium above market value.
Maybe you could try putting them into some boiling water. I dont know if the milk spots are the product of a chemical reaction or if its just simply due to a residue being there, but it's worth a try and a few minutes of your time.
I haven't checked out part of my Star Wars and Marvel silvers in a while.... to my surprise and shock, Yoda and Mando is covered in milk spots. My Kruger's, Philharmonic's, and plenty more are Milky. I'm devastated. Even though i have no plans to sell, my heart is broken. It doesn't seem fair. Evidently, it's no fault of the customer.... it's something that happens during minting. I spent good money on these (what were) "pristine" coins, and now they're just ugly. Not to mention the loss in value. Something's gotta be done!
One way that I have tried to remove milk supply and it kind of works for me is I used weiman silver polish and a Jewelers microfiber cloth which the fibers in it are slightly smaller than just your average microfiber cloth that you can get at the hardware store. It didn't leave a few very small scratches but honestly not that bad definitely not as bad as that a racer as you used.
Wow, really makes you want to reconsider the premium on Silver Eagles and modern Maple leaves. What is the good of paying less on Gov backed coins, only to have them lose value because of spotting. Any thoughts?
I am the not-so-proud owner of some 2016 Canadian Maples, a year badly affected by the problem of milk spots, as I think was mentioned in the video. Thankfully, I paid very little for them. I have had some success with the eraser removal technique. Firstly, you need to use the softest, most "rubbery" eraser you can find. I'm not sure what is available in the U.S. or elsewhere, but here in New Zealand, I find STAEDTLER is a good brand for this type of thing. Next, treat the coin as you might a piece of wood you are sanding, and "go with the grain." By this, I mean follow the lines that radiate inward. Follow the rim without touching any other part of the coin. When you come to treating the Maple leaf, this is straightforward. Follow the lines within the leaf, and be gentle over the unvariegated areas. The face and upper torso of Her Majesty present the major problem when using the eraser technique on Maples. Carefully follow the lines of the hair, and be very gentle. This is the key. And take your time... All you can do is follow what lines you can and gently rub over the face, up and down, until the spots have disappeared. If you are lucky, any marks left on H. M.'s face will be light. Next, if you have any acetone or isopropyl alcohol, dip the coin in briefly, then run it under water (I don't use purified or still water, as what comes out of the tap here is pretty harmless. You may wish to). Dry carefully with a 100% cotton cloth. Following these steps, I have been quite lucky. Out of 8 or 9, I have only scratched one. Nobody I have sold them to has complained. The buyer of most was a chap who is convinced that silver is the currency of the future. The New Zealand site I sold them on has a feedback system. No negative reviews were posted. After Christmas, I'll do the rest. I don't have many more, and I want them gone! I hope this helps someone out there with a sack of ruined silver... All the best from New Zealand, Arthur Yapp - The One-Eyed-Raven.🙏
Did you try this? : Place the coin on a sheet of aluminum in a saucepan, pour water, heat and add baking soda. Wait 5 minutes maybe more. Never tried with milk spot but it s a good way to clean dirty coins without scratching them.
I sold some 22 and 23 Brittania’s and maple leafs to JM Bullion purchase from Monument metals, and they considered them Cull because they had milk spots so I was paid less per coin. Obviously, I was disappointed because they were such a new coins. I believe it involves 75 coins.
If I were a dealer, I'd pay cull rates for coins with milk spots, even if they're in holders. I'd also break them out of the holders if they've got milk spots
Perth Mint coins are very prone to milk spots. I buy rolls of lunar coins and every roll has at least one coin with milk spots. I keep a separate box for milk spotted and defective coins. When the price goes up, I’ll just sell them as bullion.
I use acetone to clean steel before welding. I wonder how it will work for milk spots if the coin was to soak for a day. I don’t (so far) have any milk spotted silver to try it.
Get the best quality jeweler's cloth. Not expensive. Some are really gentle. I don't get dullness at all like with the white eraser. Also did it for Britannias. But, they don't work on the rims.
The reality is you can buy as of today 86 x as many Silver 1oz coins (that can potentially milk spot) to one 1oz Gold coin (that won't). Sometimes this ratio goes over 100. Other times it goes as low as 15 - so a current ratio of 86 is not bad, so if one or two get milk spots over time this is not a disaster. It's just worth closer to spot that's all.. Each week that gold to silver ratio ratio alters more than the % number of silver coins spotting in a collection. Stacking is for the long term probability game not the short term flip. Just MO
Could milk spots just disappear over time on their own? In 1996 I bought 10 new silver eagles and I have kept them in plastic capsules since then. At one point in time some of them did have milk spots, but now they're gone.
I wonder if an acetone dip would do anything to the milk spotting? It shouldn't attack the silver. It Might react to any copper in the alloy of 90%,40%, etc. if left exposed a long time. I e got an old black book that says, at least for proofs, the plan gets are washed twice in a. Ream of tartar solution, then rinsed in alcohol ,then polished. Cream of tartar would probably be abrasive to use on a finished coin though, unless just soaked?
I heard that the striking process also heats the coin, and the heat and pressure of striking bakes the borax into the surface, it can't be removed without damaging the coin.
2003 Australian kookaburra in sealed case was apparently not one’d by dealer to check it was silver has some small milk spots 👀 most on queen side but small on the rim too I’ve left it alone
they did get their act together. i haven’t got even one from them with a milkspot since they started using their secret mintshield process. i wish they would share that with other mints like the royal mint but that’s their competitor
wow I have bought some leafs recently from 2013/2014 and they barely show any sign of milkspotting. One of them has a very small spot and thats about it. The webshop I buy at however still buys them for the same price. All silver coins they buy 15% over spot, doesn't matter which mint which is why I just buy their older coins as they typically sell them for slightly less.
About the only solution I know of for milk spots is the crucible. That's fine for plain rounds, but how you remove them from a nice coin without damaging it I really don't know. Maybe I'll try some ideas with my milk spotted coins
Has any one tried electrolysis?. I tried this on some old coins. Just to clean them up, may be it would remove milk spots? Iput the coin in a salt water solution, then with a 9v battery putvthe + and - either side of the coin, work quite well.
High heat 🔥 you say 🤔 Maybe put them on a cookie sheet with or maybe without alumni foil and bake them in the oven and then dip them. Just a idea 💡 that popped into my head when you said high heat. It might be better tha direct flame 🔥 🤔
Can you use a Silver Polishing Cloth? Does this damage the coin? I have an Eagle that has a dark spot on the edge of both faces, that looks like a fingerprint tarnish. Can I use a cloth on this?
What about polishing in a ammo brass vibration polisher with Walnut media with Flits Media Additive for polishing? I used it on some 1883 and 1885 Morgan Silver Dollars and they turned out like just minted.
@@garywells9231 I just subbed to you. If you ever decide to produce content, that would be a good video. I do not produce content either. See you around. Thanks!
Most of my silver britannias by the royal mint I've bought over the last couple of years have bad milk spots. It's a real shame the royal mint can't make coins without milk spots in 2022.
I'm sorry my friend but to me at least I would know they are really silver and silver is silver it still worth whatever an ounce is going for at the time if somebody doesn't want to buy something for me because it has milk spots on it I will ask somebody else
I have a question..... Which coins seem to have the most milk spotting is the Royal Canadian mint is it the US mint who has the most milk spotting on their coins and bullion🤔💫
You're buying the silver not the dirt it should not matter just another gimmicky way for them to get things cheaper when you paid full price right is right wrong is wrong
ive never really worried about milk spotting or toning. Helps indicates that it's real silver, and pretty much everything I stack is prone to spotting anyway. Most of my silver stays locked up after it arrives, save for counting it once or twice a year, and I plan to keep it that way for the next couple of decades.
I try my best to stack for weight. Just buying already milk spotted coins at a discount seems like a good way to go. Thank You SD!
Hell yeah. I actually prefer rounds, but if they're going to sell them for round price; I'll take them.
The coins have too high a premium, and the custom rounds feel more collectable to me. They're more varied in design.
The only way to remove milk spots is with Rodico. It is a type of clay the watch repairs use. Everything else will damage in some way the coin. No one would know that it was cleaned with this stuff erasers and chemicals are the worst.
They need to come out with a better process to avoid milk spotting! The buying expense is high on these coins and then to have them devalued is ludicrous!
Toning is a good indicator that you are actually getting silver :) . And, yes, it can look great in some cases.
I bought 11 Benjamin Franklin half dollars the other day at a local coin shop and one of them was beautifully toned. I put it on top of my role in the little holder so I could see it LOL. Another coin was a dime that I found in a regular bankroll and although it was a new dime it was toned in a purple hue. I saved it aside and made a little pill bottle for toned common coins because I just like them.
Feel like these coins should come with a Money Back Guarantee from the mints.
I bought a pretty shiny coin because I wanted a pretty shiny coin. Their merchandise became defective with milk spots. Mints should do an even swap. 😄
Good point. Imagine if you buy a bright red sports car for a mid life crisis, and the next day you wake up and look out the window and your new car is dull and spotted... I wonder if the law would make the seller to repaint the car...
Seriously! 😂
I have a single 1989 Canadian Maple Leaf sealed in Canadian Royal Mint plastic that is pristine. QEII is much younger on the coin. Beautiful!
That eraser trick aged the poor queen by 40 years.
I was a custom pocket knife maker for about a decade, and we get something similar on titanium when anodizing it. You use Borax (tri-sodium phosphate) as an electrochemical conductor during the anodization process, typically in saturated solution of deionized water. When you're done with ano you have to rinse it thoroughly or you'll get little spots that develop in the oxide layer, which will ruin the finish over time. That said, the spots are actually a reaction between the silver and the phosphates in the cleaner, and you're probably going to have to etch them away, which is going to ruin the finish. You might try Barkeeper's Friend in a thin paste and a VERY soft, high-pile microfiber and see if that works - it does for Ti ano spots.
Will moon you made horrible knives and the community pushed you out for a reason.
@@tacticalcenter8658 Got bored trolling my channel so you decided to come over here. You might want to get some cream or ointment ... maybe go see a Dr. if your butt is still hurting so bad.
@@WillMoon you aren't worth the time. I'm not trolling, its the truth.
@@tacticalcenter8658 And yet, here you are, years later, still with apparently nothing better to do with your time. Get lost creep.
@@WillMoon who says I wasn't here first. Creeper
The RCM states: "As of 2018, all Maple Leaf silver bullion coins are enhanced with Mintshield surface protection." The use of a soft eraser is presumably the only relatively safe method of removing Milk Spots. But the type of eraser used is very important. You'll want to consider a soft polymer-type eraser and shape it slightly with a blade before applying it. I just bought some new Canadian silver 1oz Maple coins (2022) and I'll chime in again if I see any Milk Spots appear. I'd also suggest using moisture absorbing packets in a small, airtight, sealed plastic container to ensure the coins are not subjected to moisture or air. I have some silver coins in non-airtight displays here that have been sitting in a glass cabinet for years (they were not encapsulated) and they're quite strongly toned now. So a sealed container with no moisture seems to be the best we can hope for.
The BEST way for YOU to remove the milk spots is to send the coins TO ME! Then You won’t have milk spots anymore. You’re welcome.
WORD!
Lmao
Props to you for at least trying these methods for us. I've recently gotten a tube of mixed-year Brittanias and all of them are spotted.
Have to say milk spots on coins are a major turn off for me but then on silver bars they don't seem bother me at all.
Same, scratches and dings are bars are cool not so much on coins.
Definitely want to keep updated on this topic
I ordered a coin today, milk spots front and back. I'm going to clean it with Rembrandt toothpaste, probably do a video of it next week. I think I would have tried Red Rouge before I would use the eraser.
I've always understood the "application of high heat" solution to mean melt the coin down. Meant as a joke because there's nothing you can do about milkspots.
As a new stacker my very first purchase was a whole roll of spotted Canadian maple leaves. I specifically bought them because I'm looking for weight and I got them cheaper. I have mixed feelings about it though because I believe that the mint should guarantee them since it's their mistake in the first place. I think I paid $2 over spot for them or something pretty close to that. I just hope I get at least the spot price when it comes time to sell down the road. I've since bought some higher quality silver and even a quarter ounce gold coin. I'm continuing to learn as I go.
NGC, I read, will still grade a coin MS70 with spot. The reason being the spot is mint state and not damage or marked after production. Spot is still unsightly though. Something happened in processing coins 2016 as the U.S. Eagle, Liberty along with the CAD Maple were horrendous that year. I believe both mints tried out a new chemical that year. I did not retain the details. Other than that borax has always been believed to be the cause of spotting. Cheers for the blow torch testing. I had considered giving it a go now I have no need to waste my time.
I just checked the other day I have milk spots on my 2021 Silver Eagle's, Maple Leafs, and Perth Coinage. Long story short, buy bars and junk silver for the spot value. Also buying crypto seems like a better option (at least I don't have to worry about my Bitcoin getting milk spots that will make one Bitcoin worth less than another due to manufacturer defect). Plus I don't have to pay a premium above market value.
All the reason to buy bars . Less expensive premium. More for your money and easier to store
I tried a million ways but found the rubber with patience and gentleness is the best solution
There are coin dealers that don't care about milk spots, they will pay U the same as clean ones... Shop around U will find them
Maybe you could try putting them into some boiling water. I dont know if the milk spots are the product of a chemical reaction or if its just simply due to a residue being there, but it's worth a try and a few minutes of your time.
Borax is known to dissolve in hot sulfuric acid and silver will not be harmed in the process. I have not tested this theory yet on coins.
Thank you for the informative video.
I did not know any of this.
I haven't checked out part of my Star Wars and Marvel silvers in a while.... to my surprise and shock, Yoda and Mando is covered in milk spots. My Kruger's, Philharmonic's, and plenty more are Milky. I'm devastated. Even though i have no plans to sell, my heart is broken. It doesn't seem fair. Evidently, it's no fault of the customer.... it's something that happens during minting. I spent good money on these (what were) "pristine" coins, and now they're just ugly. Not to mention the loss in value. Something's gotta be done!
One way that I have tried to remove milk supply and it kind of works for me is I used weiman silver polish and a Jewelers microfiber cloth which the fibers in it are slightly smaller than just your average microfiber cloth that you can get at the hardware store. It didn't leave a few very small scratches but honestly not that bad definitely not as bad as that a racer as you used.
You need to use Rodico that watch repairers use to clean the parts. Waaayyy easier and better!
@@GrandChessboard I have used that before for me personally it did not work that well
Same here, I use jewelers cloth used for cleaning silver. I guess I haven’t had bad spots because they clean right off with cloths
Wow, really makes you want to reconsider the premium on Silver Eagles and modern Maple leaves. What is the good of paying less on Gov backed coins, only to have them lose value because of spotting. Any thoughts?
I am the not-so-proud owner of some 2016 Canadian Maples, a year badly affected by the problem of milk spots, as I think was mentioned in the video. Thankfully, I paid very little for them. I have had some success with the eraser removal technique. Firstly, you need to use the softest, most "rubbery" eraser you can find. I'm not sure what is available in the U.S. or elsewhere, but here in New Zealand, I find STAEDTLER is a good brand for this type of thing. Next, treat the coin as you might a piece of wood you are sanding, and "go with the grain." By this, I mean follow the lines that radiate inward. Follow the rim without touching any other part of the coin. When you come to treating the Maple leaf, this is straightforward. Follow the lines within the leaf, and be gentle over the unvariegated areas. The face and upper torso of Her Majesty present the major problem when using the eraser technique on Maples. Carefully follow the lines of the hair, and be very gentle. This is the key. And take your time... All you can do is follow what lines you can and gently rub over the face, up and down, until the spots have disappeared. If you are lucky, any marks left on H. M.'s face will be light. Next, if you have any acetone or isopropyl alcohol, dip the coin in briefly, then run it under water (I don't use purified or still water, as what comes out of the tap here is pretty harmless. You may wish to). Dry carefully with a 100% cotton cloth.
Following these steps, I have been quite lucky. Out of 8 or 9, I have only scratched one. Nobody I have sold them to has complained. The buyer of most was a chap who is convinced that silver is the currency of the future. The New Zealand site I sold them on has a feedback system. No negative reviews were posted. After Christmas, I'll do the rest. I don't have many more, and I want them gone! I hope this helps someone out there with a sack of ruined silver... All the best from New Zealand, Arthur Yapp - The One-Eyed-Raven.🙏
I had an idea to leave the coin inside an Oreo for 1 month and the cookie should absorb all the milk...
Milk spots should just be overlooked. Seeing how it’s fairly common.
Did you try this? : Place the coin on a sheet of aluminum in a saucepan, pour water, heat and add baking soda. Wait 5 minutes maybe more.
Never tried with milk spot but it s a good way to clean dirty coins without scratching them.
It works in removing copper spot from gold bar / coin as well
Cleans tarnish off silver,but not milk spots sadly
Just use silver cleaning wipes. Works perfect.
I sold some 22 and 23 Brittania’s and maple leafs to JM Bullion purchase from Monument metals, and they considered them Cull because they had milk spots so I was paid less per coin. Obviously, I was disappointed because they were such a new coins. I believe it involves 75 coins.
I just got in a bunch of Sololia Elephants from Monument Metals. They are sold as BU however 25% of them had milk spots on arrival.
Milk spots isn't damage... They don't bother me, jewelry wipes can remove them but can leave micro scratches
Boil them in water. I don't know if it works but borax is water soluble.
If I were a dealer, I'd pay cull rates for coins with milk spots, even if they're in holders. I'd also break them out of the holders if they've got milk spots
Perth Mint coins are very prone to milk spots. I buy rolls of lunar coins and every roll has at least one coin with milk spots. I keep a separate box for milk spotted and defective coins. When the price goes up, I’ll just sell them as bullion.
I use acetone to clean steel before welding. I wonder how it will work for milk spots if the coin was to soak for a day. I don’t (so far) have any milk spotted silver to try it.
It doesn't work. Oh, it were that simple...
Get the best quality jeweler's cloth. Not expensive. Some are really gentle. I don't get dullness at all like with the white eraser. Also did it for Britannias. But, they don't work on the rims.
I have not tried this. But I wonder if an ultrasonic cleaner like what jewellers use might remove the milk spots?
Jewelry wipes work well. You won’t even tell it’s been cleaned.
You can clean off milk spots using silver jewelry wipes.
I heard that if rubbed with an oreo cookie, it would soak up all the milk spots.
The reality is you can buy as of today 86 x as many Silver 1oz coins (that can potentially milk spot) to one 1oz Gold coin (that won't). Sometimes this ratio goes over 100. Other times it goes as low as 15 - so a current ratio of 86 is not bad, so if one or two get milk spots over time this is not a disaster. It's just worth closer to spot that's all.. Each week that gold to silver ratio ratio alters more than the % number of silver coins spotting in a collection. Stacking is for the long term probability game not the short term flip. Just MO
What about steam cleaning.
Seeing your removal fails was kinda funny tbh. But props for trying it on camera
Most of the time at coin shops & online dealers they're only going to give you spot at best so milk spots don't really affect it as far as that goes
Could milk spots just disappear over time on their own? In 1996 I bought 10 new silver eagles and I have kept them in plastic capsules since then. At one point in time some of them did have milk spots, but now they're gone.
Would vinegar work?
Rodico does a good job
Thats my old coin dealer when I lived over there in PDX. :-)
Will keeping the coins in capsules keep them from developing milk spots?
Not always. It is a matter of the cleaning quality from the mint, so there is little to be done if the problem roots back to the mint itself.
My Krugerrand came from bulion dealer milky..
I wonder if an acetone dip would do anything to the milk spotting? It shouldn't attack the silver. It Might react to any copper in the alloy of 90%,40%, etc. if left exposed a long time. I e got an old black book that says, at least for proofs, the plan gets are washed twice in a. Ream of tartar solution, then rinsed in alcohol ,then polished. Cream of tartar would probably be abrasive to use on a finished coin though, unless just soaked?
Milk spots and toning are proof marks 😊
I heard that the striking process also heats the coin, and the heat and pressure of striking bakes the borax into the surface, it can't be removed without damaging the coin.
Why do you want to remove milk spots? That’s the best security feature. 🤷🏻♂️
2003 Australian kookaburra in sealed case was apparently not one’d by dealer to check it was silver has some small milk spots 👀 most on queen side but small on the rim too I’ve left it alone
Are your Maples 2022? I thought they had solved that problem since 2021. At least that is how they advertised it from the RCM.
I think he used Maple Leaf coins that were minted in 2009, 2016.
One Krugerrand from 2022.
Freaking Maple Leafs are notorious for milk spots. I stopped buying them long ago.
they did get their act together. i haven’t got even one from them with a milkspot since they started using their secret mintshield process. i wish they would share that with other mints like the royal mint but that’s their competitor
wow I have bought some leafs recently from 2013/2014 and they barely show any sign of milkspotting. One of them has a very small spot and thats about it.
The webshop I buy at however still buys them for the same price. All silver coins they buy 15% over spot, doesn't matter which mint which is why I just buy their older coins as they typically sell them for slightly less.
About the only solution I know of for milk spots is the crucible. That's fine for plain rounds, but how you remove them from a nice coin without damaging it I really don't know. Maybe I'll try some ideas with my milk spotted coins
My solution for milk spotted coins was to get rid of them.
My work place is going to start using laser rust removers in the near future.
I'm going to try the machine on my milkiest coins when it gets here.
I have a ms70 ase with a small spot.
Has any one tried electrolysis?. I tried this on some old coins. Just to clean them up, may be it would remove milk spots? Iput the coin in a salt water solution, then with a 9v battery putvthe + and - either side of the coin, work quite well.
Would jeweler's pickling solution work to remove the oxide from heating with a torch?
All my ASEs and Britannias have milk spotted. I’ve stopped collecting them all together. I just buy bars and constitutional silver now.
Another cool video.
Thanks for the informationon the milk spot will not bring as much money when trying to sell them. Also, after 2018 the coins will not milk spot. JH
High heat 🔥 you say 🤔
Maybe put them on a cookie sheet with or maybe without alumni foil and bake them in the oven and then dip them.
Just a idea 💡 that popped into my head when you said high heat.
It might be better tha direct flame 🔥 🤔
What about ultrasonic cleaner?
What about the baking soda method?
Hello,
Do you know when milk stains started appearing on US coins?
In the end I will only collect Morgan and Peace dollars.
Greetings from Spain
Great video brother thanks for the info
Can you use a Silver Polishing Cloth? Does this damage the coin? I have an Eagle that has a dark spot on the edge of both faces, that looks like a fingerprint tarnish. Can I use a cloth on this?
My question is that was the Milk Spot exposed already when received, or after a period of time stored.
I tried comet cleaning power and works and keeps it shining
What about eZest Easy Coin Cleaner?
What about polishing in a ammo brass vibration polisher with Walnut media with Flits Media Additive for polishing? I used it on some 1883 and 1885 Morgan Silver Dollars and they turned out like just minted.
Surprised you didn't get very VERY small scratches. Would love to see them.
@@stevewoods8116 absolutely No scratches!! Just perfect beautiful Silver
@@stevewoods8116 These were seriously tarnished which I have no before photo.
@@stevewoods8116 I'm unable to attach photos. I tried but no go, sorry. As I stated, just pure beautiful Silver!
@@garywells9231 I just subbed to you. If you ever decide to produce content, that would be a good video. I do not produce content either. See you around. Thanks!
Do they pay less for silver rounds with milk spots?
I dont like corozion ocsidizing but i love it it meens its silver and its old
Most of my silver britannias by the royal mint I've bought over the last couple of years have bad milk spots. It's a real shame the royal mint can't make coins without milk spots in 2022.
I'm sorry my friend but to me at least I would know they are really silver and silver is silver it still worth whatever an ounce is going for at the time if somebody doesn't want to buy something for me because it has milk spots on it I will ask somebody else
Only certain year of the maples did this. I have a bunch, my LCS was practically giving them away a couple years ago. Think I nabbed them at $18 CAD.
Want to sale them for $19.00 CAD??? hahaha
@@stevewoods8116 heck no! Lol
I have a question..... Which coins seem to have the most milk spotting is the Royal Canadian mint is it the US mint who has the most milk spotting on their coins and bullion🤔💫
Why does it seem like the coins milk spot worse than the generic rounds?
Unfortunately with Perth Mint I've only ever seen them get milkspots after grading. Seems to be fine in original mint capsules.
Have you tried using a magic Eraser, you know with Mr clean lol, I’ve heard those work but idk I haven’t tried them
Why not get a pan of distilled water
Add Borax, and boil the coin, checking frequently for any changes or progress?
You're buying the silver not the dirt it should not matter just another gimmicky way for them to get things cheaper when you paid full price right is right wrong is wrong
Jewellers rouge cloth works
Great video
Jewelry wipes are supposed to remove milk spots.
That's one of the main reasons why I prefer 90% and 92% silver coins over pure ones.
Next tip, grab milk spotted coins, melt them and proceed to pour some cool bars😅👍🏼
Has anyone tried never dull wadding polish?
Deep (over night) in Bakig soda & watter or maybe in Coca-Cola 🤔😏
Coca Cola cleans everything lol. Scary we drink that stuff 😳
Tin foil in a bowl baking soda and boiling water maybe.......?
i'd just buy them as in silver round price, i don't care much as long as it's cheap enough.