Do gotta love that your new “job” is stress testing speed parts for various manufacturers while selling merch to keep purchasing parts to stress test. Rinse and repeat. No matter car, truck, bike or boat. Sweet gig brother.
Love this sort of content. Doesn't matter if it's boats or cars this is the reality of running at the sharp end as an amateur racer. Stuff goes wrong and the racing community is at it's best when a competitor needs help.
I totally hear you. Im not a fan of unboxing videos either. I do however understand the pressure Content producers are under and sometimes they just need a filler to buy them some time. Im cool with that. @@davidgoodrich1258
Great to see some more jet boats! I love all the cars but it is nice to see the boats rip as well. Never really been into boat racing until Finnegan introduced me to it with the Muscle Truck engine to jet boat to Muscle Truck swap in a parking lot episode of Roadkill. If I may suggest one thing: get a lapel mic. Rode makes a clip on unit many people use. With a good cover, it should stop most of the wind noise as well. Many of these video's are shot in loud places, so sometimes it is hard to understand what is being said. Of course, you can't mic up everyone, but maybe for the main people in the shot. Does require a sound clap for every new shot or preferably an actual clapper board (they make small ones) to make life easier for the editor.
Totally awesome 👌. I was given the opportunity 34 years ago to drag race outboard boats, and kinda wish I had. I was too busy with work and 1/4 mile drag racing (ameture). Looking forward to seeing the next video, thanks Mikie 👌👍👍👍
Racing! I’ll bet it’s a blast, but damn does it look expensive! Seems like cleeter is always blowing an engine and installing something new in his cars, and Finn just can’t catch a break with any of his either, crazy!
I get pushing things to the limit and getting as much as you can out of what you are doing... But... Dyno pulls and getting high numbers is all well and good, but if you can't put it down on the road when the time counts and you are put out in the first round or sooner because something "broke"... Well.... There you go.. I love the channel and all you do, so it's entertainment to me. Keep on keeping on!
If you suspect your motor may have an issue let Mike drive it…… even if it’s on to a trailer and he will find the problem!….. sorry Mike had to say it😂 That suck about the ramp truck, the boat, the 55, and whatever else has broke since you put out this video….. which by the way was great.
the nature of racing is that things will break. one of the last times i raced my balancer came apart. i dont race anymore but i do some things in "mexico" every once in a while
What would you do with yourself if you went to a race event (car or boat) and everything just worked and you didn't have to wrench at all! Looking forward to watching the full video.
I ran into a guy in Fort Lauderdale last weekend that was from California and claimed he was on your boat team. I think I saw him in the background in some of the shots. Pretty cool.
@@FinnegansGarage I didn't catch his name, but yes, there was a boat show. Seemed like a chill dude. I saw his FSM shirt... had to tell him how much I dig your deal. Good luck Mike!
They make really cool butt connectors that have solder in them. They were originally designed for the military and used by US Army Combat Engineers and US Navy UDT's in WW2. Now other people have revised the design and made them far cheaper, better and less toxic.
Sorry for the bad luck and hope we see that change. Maybe like we’ve talked before it’s time to get yourself a blown Cole, Mako or Canyon runner bottom run I think you said PE or blown gas.xz
Well I did what you said Mike…. I now own a jet boat! ‘75 Taylor SS, soooo when you gonna come help me put it together 😂 Come to Penrose and help me out!
Sorry Finn, I have to go here... You got rid of the last jet boat because it was too complicated and always broken. You immediately replaced it with a new drag boat that's constantly broken. Good job buddy
I never understood why he didn’t have a ratchet on game over I do get him selling it though especially considering he said before his dad wanted him to
@@davidgoodrich1258 game over was indeed very complicated and needed to be tested over and over and maintained with fine tooth comb. This boat n/a should be pretty easy to maintain he just doesn't have enough time. Can't go race drag boats and not do anything to it in between races
How many Boats do you have Finnegan? I thought this boat was in your storage. But it was out in CA. I figured you would have had a spare Motor in the trailer for you're Boat.
Man i Fucking love that drag boat thats thing is so badass i would love to get to go to a drag boat racing event one day or even get to ride in something like that or a jetboat
I really love how the US has "world finals" and no other country either competes or has a round in their country.....Love the content from Finnegan though!
I'm not trying to be mean. I've been a fan for a long time, but I cannot get used to the new assistant guy. Newburn just seem to get you, but the new guy, it's like bumper cars in the garage.
I think a lot of mistakes would never have shown up if the crew and driver stayed sober. Why do they think they need a new exhaust valve? The spring should have returned the valve to keep it from hitting the piston, when the end of the pushrod broke off. No way did the valve get pushed closer to the piston with a shorter pushrod. Maybe you need to check lash on the valves so you have closed valves so it can build compression in the cylinders.
#595. Lol, Remember kids, Don't play with butt connectors when your drunk. A very spendy last half of the year this year. Lets hope next year is Faster, and Cheaper, But not too cheap ,with Finnegan.
You had a good thing, about to get rolling good, but then you had to hit the bottle. Side chick never made much sense, granted that's part of the storyline, but a long distance relationship with a part time boat is a Cinderella story, the hard way.
The struggle bus is the most reliable thing you have, lol.
thats cold....funny though.
Do gotta love that your new “job” is stress testing speed parts for various manufacturers while selling merch to keep purchasing parts to stress test. Rinse and repeat. No matter car, truck, bike or boat. Sweet gig brother.
Love this sort of content. Doesn't matter if it's boats or cars this is the reality of running at the sharp end as an amateur racer. Stuff goes wrong and the racing community is at it's best when a competitor needs help.
Its an awesome day when a Finnegan video drops!
Not entirely true. As long as it’s not a video of him opening mail. Who the hell wants to watch a 45 min video of some dude opening mail?
I totally hear you. Im not a fan of unboxing videos either. I do however understand the pressure Content producers are under and sometimes they just need a filler to buy them some time. Im cool with that. @@davidgoodrich1258
Great demonstration of the Doppler effect!
Love that Outlaw Boats helped out with a power plant! So awesome
Great to see some more jet boats! I love all the cars but it is nice to see the boats rip as well. Never really been into boat racing until Finnegan introduced me to it with the Muscle Truck engine to jet boat to Muscle Truck swap in a parking lot episode of Roadkill.
If I may suggest one thing: get a lapel mic. Rode makes a clip on unit many people use. With a good cover, it should stop most of the wind noise as well. Many of these video's are shot in loud places, so sometimes it is hard to understand what is being said. Of course, you can't mic up everyone, but maybe for the main people in the shot. Does require a sound clap for every new shot or preferably an actual clapper board (they make small ones) to make life easier for the editor.
Win, place, or show,….or repair, still nice to see you and your team out there trying to have serious fun. 👍👍
Going fast on water is very addictive..and sketchy as hell
Get after it and good luck
Racing community is awesome. Love this content.
Totally awesome 👌. I was given the opportunity 34 years ago to drag race outboard boats, and kinda wish I had. I was too busy with work and 1/4 mile drag racing (ameture). Looking forward to seeing the next video, thanks Mikie 👌👍👍👍
"At least we're not pulling the motor out of a gremlin this time!!" Classic fin right there!!
1.3K+👍's up FC thank you for sharing this video with us all 😊
Well, everybody knows that the word boat stands for bust out another thousand. On a sidenote, it's pretty cool to see you back up and racing again.
You always have such reliable race boats😂😂😂can we ever see a full run, boat has potential, to become an anchor
My boating friends tell me that with any boat, the two happiest days are the day you buy it and the day you sell it!
Racing! I’ll bet it’s a blast, but damn does it look expensive! Seems like cleeter is always blowing an engine and installing something new in his cars, and Finn just can’t catch a break with any of his either, crazy!
Good old Horsepower, the more you want....the more it costs 😅
Good luck Sir
Very interesting 🤔 content guys. Thanks 👍 for sharing. Good 🤞 luck.
Wow had i known you were racing locally i would have come out and watched and helped where I could have.
Dude just needs to keep a crate motor with him at all times.
When the going gets tough. start drinking !
Thanks!
Thank you!
Damn, Wish I knew you were there, I live real close would have came and watched.
You just keep finding new ways to break EVERYTHING. I'm proud of you, but also feel for you because shit is so expensive now days.
Off again, On again, Finnegan, Begin Again
I get pushing things to the limit and getting as much as you can out of what you are doing... But... Dyno pulls and getting high numbers is all well and good, but if you can't put it down on the road when the time counts and you are put out in the first round or sooner because something "broke"... Well.... There you go.. I love the channel and all you do, so it's entertainment to me. Keep on keeping on!
I agree, rather compete at a slower speed than spend the time fixing broken parts !
Can't wait to see how it shakes out, Mike.
That Finnegan boy my oh my. aint hurtin his smile whatever happens
Hey it’s Nico Tony Costantino’s son thank you so much for the shirt 🙏
Lots of runs but wow what a pain in the butt to get it dialed in .
Bad day racing, still better than a good day at work...
Yes yes, aside from racing being your job!!
At least you can take comfort in knowing your at the races
That's be a cool shirt!
"As Usual We Haven't Tested It "
Best 2 ya, $cott🏁
Been waiting soooo long for sidechick content thank you sir
00:48 for when you a need a few beers deep intro.
Great videos Mike!!
Dang, I didn't know you raced there. Maybe I'll go watch next time they have races.
That blower in the background at 2:15 Sounds like it's about ready to rip down the track. #blowerlope
If you suspect your motor may have an issue let Mike drive it…… even if it’s on to a trailer and he will find the problem!….. sorry Mike had to say it😂
That suck about the ramp truck, the boat, the 55, and whatever else has broke since you put out this video….. which by the way was great.
🏁Very cool!!!!!!!!🏁
the nature of racing is that things will break. one of the last times i raced my balancer came apart. i dont race anymore but i do some things in "mexico" every once in a while
What would you do with yourself if you went to a race event (car or boat) and everything just worked and you didn't have to wrench at all! Looking forward to watching the full video.
Great content thanks for sharing
I'm liking the new guy
Any content good/bad is better than watching him open mail.
Absolutely, I can open my own mail. don't need to see someone else do it. unless it's bill's then they can have them.
🍀Get R Done😎✌️
Better than box opening vids, and not an hour on bending one pipe like some other videos.
I ran into a guy in Fort Lauderdale last weekend that was from California and claimed he was on your boat team. I think I saw him in the background in some of the shots. Pretty cool.
might have been my friend, bob. he was there for a boat show.
@@FinnegansGarage I didn't catch his name, but yes, there was a boat show. Seemed like a chill dude. I saw his FSM shirt... had to tell him how much I dig your deal.
Good luck Mike!
I bet it's rough having the race boat on the other side of the country. Still love the content
Damn wish I wouldve known there was drag boat racing at wild horse. I wouldve went to see Finnegan!
Ohh hell yeah come on man let's go 😂 .
Damn I wanted to see if you got to race and how it went. Then it came to an end
part 2 will be uploaded next sunday.
@@FinnegansGarage sounds good 👍. I'll definitely be watching
Finish-it-gann! Good luck buddy! Don't hirt your self, great features!
So going super fast, what does it mean?
Don's anything race mantra "Ya buy it, Ya build it, Ya break it and Ya fix it". Nuf said!
They make really cool butt connectors that have solder in them. They were originally designed for the military and used by US Army Combat Engineers and US Navy UDT's in WW2. Now other people have revised the design and made them far cheaper, better and less toxic.
Sorry for the bad luck and hope we see that change. Maybe like we’ve talked before it’s time to get yourself a blown Cole, Mako or Canyon runner bottom run I think you said PE or blown gas.xz
Well I did what you said Mike…. I now own a jet boat! ‘75 Taylor SS, soooo when you gonna come help me put it together 😂 Come to Penrose and help me out!
There’s this guy Pete who’s good at doing stuff, maybe drop off the motor with him one day.
didn’t he just dyno tune the engine from Blasphemy ?
@@blueman5924 I believe so
dangit i didnt even know i was there today always wanted to meet ya
Must of been an expensive weekend for this video to go out!
my wallet is on fire.
Hear that BGF warming in the background, why don't ya drive one of those Mike? 🤔 Someday?
You might have actually worked harder than I did on Nitro Nuts fueler this weekend. 😊
Sorry Finn, I have to go here... You got rid of the last jet boat because it was too complicated and always broken. You immediately replaced it with a new drag boat that's constantly broken. Good job buddy
I never understood why he didn’t have a ratchet on game over I do get him selling it though especially considering he said before his dad wanted him to
😅
The boats aren't the problem it's his time. Not enough time to devote to drag boat racing and develop a solid program
Agree. Him selling game over just to get another drag boat made zero sense.
@@davidgoodrich1258 game over was indeed very complicated and needed to be tested over and over and maintained with fine tooth comb. This boat n/a should be pretty easy to maintain he just doesn't have enough time. Can't go race drag boats and not do anything to it in between races
I think you'd have better luck with a 5.4 Triton 🤣🤣🤣
Fun video. Skip the NOS. It's like running your motor on drugs!
Finnegan, does your lawnmower even run correctly? I’m convinced that if it has a motor, and you own it, it’s broken!!!!!
If it isn't Broke, Mike can fix that.
Great Sunday afternoon everyone. Through everything in life remember Jesus Christ is the answer ✝️🙏
You do seem to have a rough go with that motor, time for a change ??? or is that just racing ? Thanks for the video ; looking forward to the the rest.
im seriously considering getting away from this engine. its actually more unreliable than my hemi.
What does the motor rev to on the plane?
Finnegan we the fans hereby revoke your right to finish in last place, you must now go steal McFarlands SMX out of Mullet & put it in your boat! lol
Hey good thing this weekend I was there and you did good. Keep up the good work
Wow! If it weren’t for bad luck you wouldn’t have any.😳😬😢😬👍👍🇨🇦
One of the fastest boats ever was when the gone Haywire boat let Widow Maker use his engine making the so called Haymaker.
How many Boats do you have Finnegan? I thought this boat was in your storage. But it was out in CA. I figured you would have had a spare Motor in the trailer for you're Boat.
Man i Fucking love that drag boat thats thing is so badass i would love to get to go to a drag boat racing event one day or even get to ride in something like that or a jetboat
Hope you managed to catch a nap this morning.
I really love how the US has "world finals" and no other country either competes or has a round in their country.....Love the content from Finnegan though!
And wire care stuff is free! oh wait thats just for finnegan.
Sidechick: When you acquire someone else's money pit that constantly breaks parts.
"👍"
You might have the record for the worst engine luck of any racer. Keep at it and you'll get the perfect rig winning everything.
What's your engine temp at before a nitrous pull?
I'm not trying to be mean. I've been a fan for a long time, but I cannot get used to the new assistant guy. Newburn just seem to get you, but the new guy, it's like bumper cars in the garage.
Aww man what an ending 😐 when will the full video be out? Next sunday?
What valves are those?
The broken kind (well, one of them is, at least)
Time to put the motor back in the muscle truck n go home😢 😂
👍👍
The only thing Finnegan cant blow up is the struggle bus.
I think a lot of mistakes would never have shown up if the crew and driver stayed sober. Why do they think they need a new exhaust valve? The spring should have returned the valve to keep it from hitting the piston, when the end of the pushrod broke off. No way did the valve get pushed closer to the piston with a shorter pushrod. Maybe you need to check lash on the valves so you have closed valves so it can build compression in the cylinders.
So Much room For activates
Boat is cursed!
Atleast it was fast
...I Foresee a sale on more T=shirts & FSM swag in the immediate future. LOL
That motor has ben a problem since day one. I think you should take it to a big name builder and have it redone
Thats what happens when you start using devil sneezes to go faster bro.
Man is it odd to see such a short video from you
more excitement than mail though.
#595. Lol, Remember kids, Don't play with butt connectors when your drunk. A very spendy last half of the year this year. Lets hope next year is Faster, and Cheaper, But not too cheap ,with Finnegan.
Race motors do race motor stuff
You had a good thing, about to get rolling good, but then you had to hit the bottle.
Side chick never made much sense, granted that's part of the storyline, but a long distance relationship with a part time boat is a Cinderella story, the hard way.
Water Kill?