Bought my first cart a few days ago but thank you for the excellent information. I think I will be ordering one of these sound bars soon. First thing is scratch repair and a new paint that job. I subscribed as well.
You should have described how you pulled the cables (with the big end fixtures) through the narrow cart support tube one at a time. This is not an easy task and can be frustrating since the tube is narrow and the side holes are also small.
I've looked on your website and tried the links that are on the comments below but I cannot find the accessory bar that was used to mount the speaker to. I have a 2018 EZGO Express L6, can you send me the link for the bar that I need for my cart?
I just put this on my EZGO gas golf cart and works great until I start driving and the unit powers off. I have this wired to my 12 volt starter battery. Is there a fix for this?
I have a 2014 Yamaha gas cart and just installed this. It is awesome and loud!! but every time I turn on my headlights it gets distorted and then stops playing. Wetsounds told me that is getting too many volts from the 12v battery. Any idea how I can play this and have my lights on at the same time?
Do you have a video that addresses a gas cart that needs a second battery to accommodate underglow lighting, sound, light bars, etc. How is that set up? I have heard different answers from different dealers. Such as voltage regulators, dual bank chargers, batteries that don’t need a charger, batteries that will need to be individually charged. So many different ideas!!! What do you recommend to support all of the additional accessories.
I just ordered one of these soundbars. I wish I would have seen this video yesterday. installation manual on wetsounds website says a voltage reducer is required on an electric cart. Wish I would have known it would run on 16 volts. I would have wired it just as you did. instead I also ordered an $80 voltage reducer that I don't need.
Bought my first cart a few days ago but thank you for the excellent information. I think I will be ordering one of these sound bars soon. First thing is scratch repair and a new paint that job. I subscribed as well.
You should have described how you pulled the cables (with the big end fixtures) through the narrow cart support tube one at a time. This is not an easy task and can be frustrating since the tube is narrow and the side holes are also small.
Where did you get the cross bar that you are going to mount the stereo to? I would like to mount mine above the dash because of the weight.
I've looked on your website and tried the links that are on the comments below but I cannot find the accessory bar that was used to mount the speaker to. I have a 2018 EZGO Express L6, can you send me the link for the bar that I need for my cart?
We’re can you find that bar at to mount the sound bar at
I just put this on my EZGO gas golf cart and works great until I start driving and the unit powers off. I have this wired to my 12 volt starter battery. Is there a fix for this?
How do you set up the remote that comes with it?
Have you installed the wet sound sub.
Unfortunately we haven't done a video on Wet Sounds yet, but thanks for watching and don't forget to subscribe.
I have a 2014 Yamaha gas cart and just installed this. It is awesome and loud!! but every time I turn on my headlights it gets distorted and then stops playing. Wetsounds told me that is getting too many volts from the 12v battery. Any idea how I can play this and have my lights on at the same time?
Go by a radio shop, they have a resister that can be put in line to remove the excess noise.
Where i can get the bar for the speaker?
Is a second battery recommended for speaker install on a gas club car precedent?
Do you have a video that addresses a gas cart that needs a second battery to accommodate underglow lighting, sound, light bars, etc. How is that set up? I have heard different answers from different dealers. Such as voltage regulators, dual bank chargers, batteries that don’t need a charger, batteries that will need to be individually charged. So many different ideas!!! What do you recommend to support all of the additional accessories.
Do you need to have a on off switch?
It appears that you hooked the bar up to 16v using 8v batteries? Is this correct? I was going to install with a 30a voltage reducer.
Yes, it works fine on 16 volts.
Sweet
This can work on tractor?
I just ordered one of these soundbars. I wish I would have seen this video yesterday. installation manual on wetsounds website says a voltage reducer is required on an electric cart. Wish I would have known it would run on 16 volts. I would have wired it just as you did. instead I also ordered an $80 voltage reducer that I don't need.
Doh!!!
Is this only for electric carts? I have a Yamaha G22, gas. Can I use one of these speaker bars on it?
Yes, it hooks up to 12 volts
This is great to learn, thank you! I have a lot to learn about hooking stuff up, so thanks!
Where did you get the bar that was used to support the soundbar?
That particular bar was a piece of another kit that was left over. (scrap) We actually now have an accessory bar that is used.
How do you know it's capable of running at 16 volts?
We hooked it up to 2 - 16 volt batteries and played it for an extended amount of time.
Where can I get one of those mounting bars?
www.golfcartking.com/golf-cart-universal-black-accessory-bracket-for-recreational-vehicles-and-applications/
Dont waste yo money on this bracket if u have club car ds doesn't fit tried modifying still didn't work a waste of money!
What was the crossbar you used?
That's a accessory bar that we have available for different makes and models.
DIY Golf Cart what’s the link for an Ezgo Txt accessory bar
@@tamccluney diygolfcart.com/golf-cart-universal-black-accessory-bracket-for-recreational-vehicles-and-applications/
I sit waterproof
It is water resistant. Don't hose it down!!
It is water resistant.
Awesome
Thanks for watching! Don't forget to subscribe!