Super bro. I'm an Electronics and Instrumentation Engineering student. It is very helpful for me to understand in a better way. You explained the calibration very well. Tq so much bro. Keep it up. Make more useful videos like this. Congratulations for your efforts.
Thanks for video shared with us .It will definitely help is during calibration . I am suggesting you , please make a video on IATF, EHS and OHSAS with suitable format.
Sir really ur videos are awesome. Sir chennaila job consultancies pathi idea iruka Sir. Nalla consultancy iruntha I have 5 years experience in quality line in automobile industry
Sir, we understood about calibration and it's content very clearly. Thank you. However I have small query on this that's how to take decision on instrument/gauge ref with its error which means how much error we can accept for respective instruments/gauge. Acceptable percentage?
Hi friend, there is no specific error percentage for instruments. IS standard provides the max permissible error based on instrument and its range in microns or mm. Pls refer that standard.
Hi Murali, any instrument will be calibrated by using the master (with know value) and the error will be compared with the acceptance criteria as per standard. Then decision will be taken
IS Standard available for acceptance criteria for each type of instruments. Kindly refer below link and check with required standard nabl-india.org/wp-content/uploads/2021/11/NABL-129-Issue-01-Amd-01-1.pdf
It is a place to keep instruments and gauges for storage. Internal Calibration also will be done in that place. Further details will be given when uploading standards room video.
Hi, your question is correct. It is not explained in our video. It will help others also. The acceptance criteria means, each industry will specify their acceptance error criteria for each instruments. If the calibration error is within their acceptance limit, that instrument will be used otherwise that instrument to be scrapped or reworked.
It is a place to keep instruments and gauges for storage. Internal Calibration also will be done in that place. Further details will be given when uploading standards room video.
Hi Mr.Kokilan, normally calibration will be planned once in a year. It will be reduced to once in 6 months or increased to once in 2 year or more based on gauge / instrument usage
th-cam.com/channels/bsoHyXxtAelbMYicLaHQGQ.html
Report eppad podurathu
Anna..romba thanks...nalla explanation...tamil channel nereya illa...nalla uboyagamaana video
Thank you. Keep watching and sharing our videos
Super bro. I'm an Electronics and Instrumentation Engineering student. It is very helpful for me to understand in a better way. You explained the calibration very well. Tq so much bro. Keep it up. Make more useful videos like this. Congratulations for your efforts.
Thank you Muhammad. Keep watching and sharing our videos
Really super explain sir
Thank you
Hi sir. Unga videos lam romba clear ah irukku sir. Unga PPT share panna romba useful ah irukkum sir.
Ok Samuel. Will share in future
Thanks for video shared with us .It will definitely help is during calibration . I am suggesting you , please make a video on IATF, EHS and OHSAS with suitable format.
Hi Pandhare, they are in our list also. Will come in future
Great work...Calibration pathi detail ah explain pannerkinga...All the best
Thank you . Keep watching and sharing our videos
Anna,romba nandri 🙏
Thank you friend
Bro surface finish pathi video podunga...basic la irndhu solli kudunga like traverse length evaluation length..etc..
Hi santhosh, your content is noted and will try in future
How to calibrate for all instruments... Saparate vidoes updated pannuga sir Plzz.. unga video romba usefull ah eruku sir... thanq u sir...
Hi Abiraj, will try in future
your videos very very useful video thank sir
Thank you
Thanks sir very useful and i learn calibration.
Thank you Aravind. Keep watching and sharing our videos to your other friends
Sir really ur videos are awesome. Sir chennaila job consultancies pathi idea iruka Sir. Nalla consultancy iruntha I have 5 years experience in quality line in automobile industry
Hi Vignesh all details available in internet
Bro for junior engineer position interview questions pathi sollunga
And adu pathi ellam solli kuduthu video podunga
Ok Rahul. Noted your content. will be planned in future
Sir, we understood about calibration and it's content very clearly. Thank you. However I have small query on this that's how to take decision on instrument/gauge ref with its error which means how much error we can accept for respective instruments/gauge. Acceptable percentage?
Hi friend, there is no specific error percentage for instruments. IS standard provides the max permissible error based on instrument and its range in microns or mm. Pls refer that standard.
Sir, Explain in Completely about Measurement Standard-International, National, Reference, Master, Working Standards.
Hi Vijay kumar, will try in future
Supper very useful thanks
Thank you Pugal. Keep watching and sharing our videos
Congratulations guru
Thank you
Dear sir ,for your video very use fulo ,but Fabrication & welding related videos poduga sir
Hi Balamurugan, your content is noted and will plan in future
what is standard room ? please make videos poduga sir with example
Hi Ramesh, noted your content.
Sir please make a video on cost of poor quality
Hi Suresh, it is already in our list. Will be uploaded in future
Please do the video for iso 9001:2015 QMS document
OK Dilli babu. It is already in our list
Sir GD&T and layout inspection related videos upload pannuga. It's very useful for your follwers.
Yes Mohan. Definitely it will be come in future.
Thanks for your reply sir
Hi sir, how calibrated bore gauge and comparator
Hi Murali, any instrument will be calibrated by using the master (with know value) and the error will be compared with the acceptance criteria as per standard. Then decision will be taken
@@newmechanicalmind8818 thanks for your reply,which standard we refer,we doing repeatability test for bore gauge and comparator
Hi Murali, for any dial type we have to refer IS 2092 and link is given below
law.resource.org/pub/in/bis/S01/is.2092.1983.pdf
Can i calibrate vernier by micrometer?
Masters like standard pins and slip gauges should be used to calibrate the vernier.
Bro calibration report la uncertainty of measurement epdi calculate panranga then k factor na ena bro
Hi Gokul, it is related to type of instruments selected. K value determines the confidence level
How to verify the acceptance criteria whether the instrument OK or not?
IS Standard available for acceptance criteria for each type of instruments. Kindly refer below link and check with required standard
nabl-india.org/wp-content/uploads/2021/11/NABL-129-Issue-01-Amd-01-1.pdf
Please complete the PPAP and start APQP
OK Mani. Next PPAP video only will come and continue till end of this series.
Utm m/c video portunga bro
Hi Saravanan, your content is noted and will come in future
@@newmechanicalmind8818 waiting 👍
@@newmechanicalmind8818 tamil la utm m/c ku video ella bro
Super Bro :)
Thank you venkatesh. Keep watching and sharing our videos to your other friends
Sir today enna instrument calibration panna sonnan ennapandranu theriyala internal calibration eppad
Pls give some additional details
❤❤❤😊
Thank you
hi bro i need information to get calibration certificate (how to apply for exam qualification etc)
Hi Ganesan, pls refer this website
www.gdandtbasics.com/true-position/
standard room sir videos poduga sir
OK
stand room work enna sir
It is a place to keep instruments and gauges for storage. Internal Calibration also will be done in that place. Further details will be given when uploading standards room video.
Calibration frequency enna sir
It is depends on our usage. We can plan once in 6 months or year or 2 year once.
Thanks for your information..
Thank you Devaraj. Keep watching and sharing our videos
Sir calibration la
Accepted criteria level appdina yanna sir
Hi, your question is correct.
It is not explained in our video. It will help others also.
The acceptance criteria means, each industry will specify their acceptance error criteria for each instruments. If the calibration error is within their acceptance limit, that instrument will be used otherwise that instrument to be scrapped or reworked.
@@newmechanicalmind8818 ok sir
How do i specify or calculate the acceptance criteria
Plz expain with an example coming Wednesday yamaha music AUDIT
standard room anna sir?
It is a place to keep instruments and gauges for storage. Internal Calibration also will be done in that place. Further details will be given when uploading standards room video.
Atmospheric condition 20°+or-2° not 1°
Hi Santhosh, thank you for your clarification
Congrats nambar
Hi pls ask in detail
Sir can you send the PPT ?
Hi Mr.Siva, kindly make the ppt by your own for better understanding and your can make in your style also
Sir i need a calibration calendar
Hi Mr.Kokilan, normally calibration will be planned once in a year. It will be reduced to once in 6 months or increased to once in 2 year or more based on gauge / instrument usage
Ji...If possible pls share the ppt
Pls send a mail to me
Kindly leave a msg if u mailed to me....
Can I've pdf file?
Hi Vignesh, you can create your own presentation by copying our video and searching in net. I have made like that only.
Bro intha video la katra PDF share pannuga
Hi Kamalesh, take a snap shot in video
Sir R&R video send me sir
Hi Aravinda kumar, links are given below
th-cam.com/video/ALjfRXtyf58/w-d-xo.html
th-cam.com/video/9h-5MSbTOc8/w-d-xo.html
Sir , Please Put video about Quality engineer interview Q/A . Please sir....
Hi Karthikeyan, noted your content and will be planned in future
@@newmechanicalmind8818 I'm waiting for your video sir
Hai,
what is the different between calibration and R&R Study
Hi Gowtham, pls see MSA vs Calibration vide o in our channel. Link is given below
th-cam.com/video/rtaEeOz_5Dk/w-d-xo.html