Atlas Craftsman Lathe Restoration Revival Part 3 (Quick Change Gear Box & Countershaft)

In this video I continue the restoration on my 12 inch Atlas Craftsman metal lathe. I restore the quick change gear box and counter shaft assembly.
Supplies:
Rust Remover: amzn.to/3ZI45M9
SEA 20 Machine Oil: amzn.to/3ZrjXCx
SEA 20 Non Detergent Oil: amzn.to/3ZNWOty
Link Belts: amzn.to/3kQGGIY
Shop Towels: amzn.to/3yjbRQg
WD-40: amzn.to/3ITSfHj
Degreaser: amzn.to/3IWdlVI
Blue Tape 1": amzn.to/3L1SRxc
Blue Tape 2": amzn.to/3yjA2OE
Primer: amzn.to/3kTDqMZ
Paint: amzn.to/3kVsnmo
Clear Coat: amzn.to/3F5puX0
Tools:
Chuck Wrench: amzn.to/3IZN0Gl
Oil Can: amzn.to/3YqV4pg
15L Ultrasonic Cleaner: amzn.to/3ITVte1
Hearing protection: amzn.to/3IWmgGv
Safety Glasses :amzn.to/3ZDnLQK
Mask/Respirator: amzn.to/41MvrCd
Wrenches: amzn.to/3F45B2I
Ratchets: amzn.to/3mtzseu
Pin Spanner Wrench: amzn.to/3IWiYmQ
Camera Equipment:
Canon SL2 - amzn.to/2GPW1ms
Tripod - amzn.to/2XWVhSd
GoPro: amzn.to/3tKVjiB

[@AmateurRedneckWorkshop]

Nice work painting and assembling. Thanks for the video keep on keeping on.

[@MakeStuffNation]

Thanks, will do!

[@gregorystalans3094]

really enjoying watching these restoration videos. I'm preparing to start restoring my late grandfathers lathe in a few weeks. It has been used heavily and will continue to be used a lot in the future.

[@MakeStuffNation]

That's awesome! I wish you the best of luck!

[@devonkobbe515]

In your first video you had mentioned you would link the video explaining what gears are needed to lower the feed speed. Can you link that here?

[@MakeStuffNation]

Of course! I haven't made my video yet, but this gentleman explains it well in his video: th-cam.com/video/pV5TpMwehgg/w-d-xo.htmlsi=HY6YkMRbzTUMvcwj
Good luck and thanks for the support!

[@XPFTP]

will was a waste of my time. would of been nice explain the gear box and how it comes aprt so on. o will .

[@MakeStuffNation]

Thanks for supporting the channel