👍 Wait for it, static balancing or at least checking it 2come, cant do it now, dont have the needed spine yet. Also wanna check flywheels. The thorn that fits for the hubs is to thick
the rivets u mean. caus e it wouldnt improve the connection. the idea is to make ADDITIONAL connections, as the rivets are quite weak. welding them directly... the still are weak then. but welded, so no improvement.
Thankyou for imparting your knowledge, learning a lot from you.
Molto utile ed informativo, grazie
Next video: balancing the clutch? Sorry, just kidding - thank you so much for your videos, very informative and most of all independent view!
👍 Wait for it, static balancing or at least checking it 2come, cant do it now, dont have the needed spine yet. Also wanna check flywheels. The thorn that fits for the hubs is to thick
as always, very useful information..thank you for sharing
Thank you! Just one question, why you don’t weld the smal pin directly ? I don t understand why we need to drill and weld…
the rivets u mean. caus e it wouldnt improve the connection. the idea is to make ADDITIONAL connections, as the rivets are quite weak. welding them directly... the still are weak then. but welded, so no improvement.
thank you for the video, grazie per il video
How about Malossi clutch spring for more horse power ?
I use sip L, malossi are ususally too hard = damaging the clutch bearing
how thick is the metal ring around the basket (2mm or more???)
rather 1.5mm but i need to measure if i dont forget
Why is a strengthened circlip important?
safety :) u use harder springs, so u also should use a stronger circlip
How the cnc sip clutch with the cut outs. I see sip rates it at 25hp. For my p177x
Not needed for your px177
can i buy polini clutch plates fit cosa 2 clutch ,, bgm honda plates lasted under 100miles
no polini for largeframe clutch available. use honda plates.
👍
what about the px150 clutch?
px old 6 spring ? Cnc basket or basket with Ring / cosa? Same same
@@FreakMoPed8 yes px old 6 spring
Teninch offers a cnx basket or u use a ring for the standrd basket
No honda linings possi le tough due to small diameter
Which order do you put the plain plates in?
When get buy them?
you need to make it by your self, that why its called DIY - do it yourself :)