POSTPROCESSOR BUILDING in NX CAM - Get the code you want by customizing your posts with Post Builder

[@SiemensSoftware]

Thanks for your comment, Siva. Take a look at some of the other Post Processing Tech Tips in the NX CAM Tech Tip playlist - you’ll find some good details for using Post Builder there.
The Machine Builder function in NX is where you construct or modify the machine models, including their kinematics and motion limits. We’ll consider creating a Tech Tip on the Machine Builder function for a future video.

[@dehartman]

I cannot find the tool information TCL . Please tell me the location of this file .All i can find is tool list.

[@akashmore8563]

Plz make a video on how to add D value in G41 cutter compensation

[@PisTTasha]

thanks for the video , what i want to ask is , if i want to make post that will work with other cam software like hsmworks and mastercam , foe exomple i want to make a post for a 3 axis machine with Sinumerik 828d . can i do it with NX postpro- builder ?

[@ronespindola94]

Which version of NX it is? , Or it works equal than NX- 8

[@ImmortalDavicc]

Hi,
I need some help with building a postprocessor for Mitsubishi. It is very similar to Fanuc, but when you turn off cutcom with a simple G40 sentence w/o any X,Y movements, it makes the tool move back to the "original" coordinates (that would be w/o cutcom). It causes crashes, gauges.
How can I make the postprocessor post G40-s with a movement?
Thank you in advance!

[@anhtuan-zm7sx]

thanks you so much. I have a question, how to post code type G41 G42 . thanks you

[@diennguyenk32a21]

thanks for the video, i want to make a post for a 3 axis machine TNC 430
Do you hava post TNC 430

[@tarunchawla1924]

I m currently using ug nx 10 to make g code
When i m converting the g code to nc format the scaling of 10:1 takes place
Means if i hade to made a pgm to cut a square of 100x 100 machin will only cut sqaure of 10x10
Please support what is to be done

[@Vice2Vice]

what about g-code sinumerik 808d ?

[@ronespindola94]

Hi i can´t find the tool information file, where it is ?

[@ЕкатеринаКоренева-ь4ш]

Great video!

[@guymalpass1]

Hi, I cannot get the postprocessor to output feed rates higher than 10000. I can't find anything in the postbuilder to be limiting this, could you please tell me where I should be looking?

[@redwan6310]

Hi. Post builder --->main page---->general parameters------> Traversal Feed Rate --->Maximum=(Enter the value U want )

[@AFreund]

Guy Malpass You can adjust this in the TCL File. The variable is called "set mom_kin_max_fpm"

[@AfsalAbbaAbba]

Pls help
nx 12 post butler shopbot program (sbp) program

[@mformachinist1080]

Pls teach shopmill program (no G )

[@SivaKumarcnc]

Anyone tell me how to make G92(78) lathe Taper thread cutting cycle post processor in NX.
I made G92 straight Lathe Threading post but taper thread i don't have no idea about this would you please help this .

[@cornishman1954]

I am looking for somebody that could help me with a post-processor for Artcam (Carvco) to run a DSP A18 controller with rotary along the Y

[@laxmannx5438]

Thank u❣️❣️❣️

[@landryatamegui2141]

thanks

[@АлексейМатроницкий]

hey guys, does anybody have nx postbuilder manual?

[@SivaKumarcnc]

give more detail & say how to build a machine. thanks for post

[@wiraxbox360]

hello this is good

[@hectoralanis4540]

👍👍👍😁